In order to solve the problems that the injury, hemorrhage, infection and edema of the brain tissue caused by brain electrodes implantation for aquatic animal robots, a light stimulation device and an optical control experiment method for carp robots are proposed in this paper. According to the shape of the carp skull, the device is a structure of Chinese character " 王” cut by a printed circuit board which can provide three groups of A, B and C bridge platforms for the light stimulation source. The two ends of a bridge in every group are welded with a jumper board, and the light emitting diodes (LED) are inserted into the jumper boards as the light stimulation source, and all negative poles of the jumper boards are connected to the console by the wire. A LED light can be replaced by another LED light according to the need of the wavelength of the LED light, and various combinations of the light stimulation modes can be also selected. This device was mounted on the carp robot’s head, the carp robot was placed in a water maze, and the optical control experiment method was observed to control the forward movement and steering movement of the carp robots (n = 10) under the dark light condition. The results showed that the success rates of the three groups of red light control experiments were 53%–87%, and the success rates of the three groups of blue light control experiments were 50%–80%. This study shows that the apparatus and the method are feasible.
Citation： PENG Yong, HAN Xiaoxiao, WANG Tingting, LIU Yang, YAN Yanhong, ZHAO Yang, WANG Aidi, SU Peihua, ZHANG Fan. A light stimulation device and optical control experiment method for carp robots. Journal of Biomedical Engineering, 2018, 35(5): 720-726. doi: 10.7507/1001-5515.201801076 Copy