APPLICATION OF THREE-DIMENSIONAL PRINTING TECHNIQUE IN ORTHOPAEDICS_Chinese Journal of Reparative and Reconstructive Surgery

Authors：

LUOQiang , TakWing LAU , FANGXinshuo ,  FrankieLEUNG

Department of Orthopaedics and Traumatology, Li Ka Shing Faculty of Medicine, the University of Hong Kong, Hong Kong, P. R. China;

Corresponding author：

FrankieLEUNG, Email: klleunga@hku.hk

Keywords：

Three-dimensional printing technique; Rapid prototyping technique; Orthopaedic surgery

DOI：

10.7507/1002-1892.20140061

Video：

Export PDF Favorites Scan Get Citation

Abstract Full text Figures/Tables Video References Cited by

Objective To review the current progress of three-dimensional (3-D) printing technique in the clinical practice, its limitations and prospects. Methods The recent publications associated with the clinical application of 3-D printing technique in the field of surgery, especially in orthopaedics were extensively reviewed. Results Currently, 3-D printing technique has been applied in orthopaedic surgery to aid diagnosis, make operative plans, and produce personalized prosthesis or implants. Conclusion 3-D printing technique is a promising technique in clinical application.

Citation： LUOQiang, TakWing LAU, FANGXinshuo, FrankieLEUNG. APPLICATION OF THREE-DIMENSIONAL PRINTING TECHNIQUE IN ORTHOPAEDICS. Chinese Journal of Reparative and Reconstructive Surgery, 2014, 28(3): 268-271. doi: 10.7507/1002-1892.20140061 Copy

1.	Von Tengg-Kobligk H, Weber TF, Rengier F, et al. Imaging modalities for the thoracic aorta. J Cardiovasc Surg (Torino), 2008, 49(4):429-447.
2.	Rengier F, Weber TF, Giesel FL, et al. Centerline analysis of aortic CT angiographic examinations:benefits and limitations. AJR Am J Roentgenol, 2009, 192(5):W255-263.
3.	Hahn HK, Millar WS, Klinghammer O, et al. A reliable and efficient method for cerebral ventricular volumetry in pediatric neuroimaging. Methods Inf Med, 2004, 43(4):376-382.
4.	Sanghera B, Naique S, Papaharilaou Y, et al. Preliminary study of rapid prototype medical models. Rapid Prototyping Journal, 2001, 7(5):275-284.
5.	Hieu LC, Zlatov N, Sloten JV, et al. Medical rapid prototyping ap plic ations and methods. Assembly Automation, 2005, 25(4):284-292.
6.	Petzold R, Zeilhofer HF, Kalender WA. Rapid prototyping technology in medicine-basics and applications. Comput Med Imaging Graph, 1999, 23(5):277-284.
7.	D'Urso PS, Earwaker WJ, Barker TM, et al. Custom cranioplasty using stereolithography and acrylic. Br J Plast Surg, 2000, 53(3):200-204.
8.	Faber J, Berto PM, Quaresma M. Rapid prototyping as a tool for diagnosis and treatment planning for maxillary canine impaction. Am J Orthod Dentofacial Orthop, 2006, 129(4):583-589.
9.	Mavili ME, Canter HI, Saglam-Aydinatay B, et al. Use of three-dimensional medical modeling methods for precise planning of orthognathic surgery. J Craniofac Surg, 2007, 18(4):740-747.
10.	Armillotta A, Bonhoeffer P, Dubini G, et al. Use of rapid prototyping models in the planning of percutaneous pulmonary valved stent implantation. Proc Inst Mech Eng H, 2007, 221(4):407-416.
11.	Kim MS, Hansgen AR, Carroll JD. Use of rapid prototyping in the care of patients with structural heart disease. Trends Cardiovasc Med, 2008, 18(6):210-216.
12.	Kim MS, Hansgen AR, Wink O, et al. Rapid prototyping:a new tool in understanding and treating structural heart disease. Circulation, 2008, 117(18):2388-2394.
13.	Wurm G, Tomancok B, Pogady P, et al. Cerebrovascular stereolithographic biomodeling for aneurysm surgery. Technical note. J Neurosurg, 2004, 100(1):139-145.
14.	Giesel FL, Hart AR, Hahn HK, et al. 3D reconstructions of the cerebral ventricles and volume quantification in children with brain malformations. Acad Radiol, 2009, 16(5):610-617.
15.	Muller A, Krishnan KG, Uhl E, et al. The application of rapid prototyping techniques in cranial reconstruction and preoperative planning in neurosurgery. J Craniofac Surg, 2003, 14(6):899-914.
16.	Guarino J, Tennyson S, McCain G, et al. Rapid prototyping technology for surgeries of the pediatric and pelvis. J Pediatr Orthop, 2007, 27(8):955-960.
17.	Brown GA, Firoozabakhsh K, DeCoster TA, et al. Rapid prototyping:the future of trauma surgery? J Bone Joint Surg (Am), 2003, 85-A Suppl 4:49-55.
18.	Hurson C, Tansey A, O'Donnchadha B, et al. Rapid prototyping in the assessment, classification and preoperative planning of acetabular fractures. Injury, 2007, 38(10):1158-1162.
19.	Kacl GM, Zanetti M, Amgwerd M, et al. Rapid prototyping (stereolithography) in the management of intra-articular calcaneal fractures. Eur Radiol, 1997, 7(2):187-191.
20.	Paiva WS, Amorim R, Bezerra DA, et al. Aplication of the stereolithography technique in complex spine surgery. Arq Neuropsiquiatr, 2007, 65(2B):443-445.
21.	戴尅戎, 朱振安, 孙月安, 等. 计算机辅助个体化人工半骨盆的设计与应用. 中华骨科杂志, 2005, 25(5):258-262.
22.	Sun W, Li J, Li Q, et al. Clinical effectiveness of hemipelvic reconstruction using computer-aided custom-made prostheses after resection of malignant pelvic tumors. J Arthroplasty, 2011, 26(8):1508-1513.
23.	Harrysson OL, Hosni YA, Nayfeh JF. Custom-designed orthopedic implants evaluated using finite element analysis of patient-specific computed tomography data:femoral-component case study. BMC Musculoskelet Disord, 2007, 8:91.
24.	He J, Li D, Lu B, et al. Custom fabrication of composite tibial hemi-knee joint combining CAD/CAE/CAM techniques. Proc Inst Mech Eng H, 2006, 220(8):823-830.
25.	王臻, 滕勇, 李涤尘, 等. 基于快速成型的个体化人工半膝关节的研制——计算机辅助设计与制造. 中国修复重建外科杂志, 2004, 18(5):347-351.
26.	滕勇, 王臻, 李迪尘, 等. 快速成型的个体化人工半膝关节的研制——股骨髁的三维建模. 中国修复重建外科杂志, 2004, 18(4):257-260.
27.	Kozakiewicz M, Elgalal M, Loba P, et al. Clinical application of 3D pre-bent titanium implants for orbital floor fractures. J Craniomaxillofac Surg, 2009, 37(4):229-234.
28.	李祥, 王成焘. 快速成形技术制造组织工程支架研究进展. 生物工程学报, 2008, 24(8):1321-1326.
29.	Peltola SM, Melchels FP, Grijpma DW, et al. A review of rapid prototyping techniques for tissue engineering purposes. Ann Med, 2008, 40(4):268-280.
30.	Hoque ME, Hutmacher DW, Feng W, et al. Fabrication using a rapid prototyping system and in vitro characterization of PEG-PCL-PLA scaffolds for tissue engineering. J Biomater Sci Polym Ed, 2005, 16(12):1595-1610.
31.	Mironov V, Boland T, Trusk T, et al. Organ printing:computer-aided jet-based 3D tissue engineering. Trends Biotechnol, 2003, 21(4):157-161.
32.	Fedorovich NE, Alblas J, de Wijn JR, et al. Hydrogels as extracellular matrices for skeletal tissue engineering:state-of-the-art and novel application in organ printing. Tissue Eng, 2007, 13(8):1905-1925.
33.	Billiet T, Vandenhaute M, Schelfhout J, et al. A review of trends and limitations in hydrogel-rapid prototyping for tissue engineering. Biomaterials, 2012, 33(26):6020-6041.
34.	Zein I, Hutmacher DW, Tan KC, et al. Fused deposition modeling of novel scaffold architectures for tissue engineering applications. Biomaterials, 2002, 23(4):1169-1185.
35.	Samar JK, Bose S, Hosick HL, et al. Development of controlled porosity polymer-ceramic composite scaffolds via dused deposition modeling. Mater Sci Eng, 2003, 23(5):611-620.
36.	Endres M, Hutmacher DW, Salgado AJ, et al. Osteogenic induction of human bone marrow-derived mesenchymal progenitor cells in novel synthetic polymer-hydrogel matrices. Tissue Eng, 2003, 9(4):689-702.
37.	Hieu LC, Bohez E, Vander Sloten J, et al. Design and manufacturing of cranioplasty implants by 3-axis cnc milling. Technol Health Care, 2002, 10(5):413-423.

1. Von Tengg-Kobligk H, Weber TF, Rengier F, et al. Imaging modalities for the thoracic aorta. J Cardiovasc Surg (Torino), 2008, 49(4):429-447.
2. Rengier F, Weber TF, Giesel FL, et al. Centerline analysis of aortic CT angiographic examinations:benefits and limitations. AJR Am J Roentgenol, 2009, 192(5):W255-263.
3. Hahn HK, Millar WS, Klinghammer O, et al. A reliable and efficient method for cerebral ventricular volumetry in pediatric neuroimaging. Methods Inf Med, 2004, 43(4):376-382.
4. Sanghera B, Naique S, Papaharilaou Y, et al. Preliminary study of rapid prototype medical models. Rapid Prototyping Journal, 2001, 7(5):275-284.
5. Hieu LC, Zlatov N, Sloten JV, et al. Medical rapid prototyping ap plic ations and methods. Assembly Automation, 2005, 25(4):284-292.
6. Petzold R, Zeilhofer HF, Kalender WA. Rapid prototyping technology in medicine-basics and applications. Comput Med Imaging Graph, 1999, 23(5):277-284.
7. D'Urso PS, Earwaker WJ, Barker TM, et al. Custom cranioplasty using stereolithography and acrylic. Br J Plast Surg, 2000, 53(3):200-204.
8. Faber J, Berto PM, Quaresma M. Rapid prototyping as a tool for diagnosis and treatment planning for maxillary canine impaction. Am J Orthod Dentofacial Orthop, 2006, 129(4):583-589.
9. Mavili ME, Canter HI, Saglam-Aydinatay B, et al. Use of three-dimensional medical modeling methods for precise planning of orthognathic surgery. J Craniofac Surg, 2007, 18(4):740-747.
10. Armillotta A, Bonhoeffer P, Dubini G, et al. Use of rapid prototyping models in the planning of percutaneous pulmonary valved stent implantation. Proc Inst Mech Eng H, 2007, 221(4):407-416.
11. Kim MS, Hansgen AR, Carroll JD. Use of rapid prototyping in the care of patients with structural heart disease. Trends Cardiovasc Med, 2008, 18(6):210-216.
12. Kim MS, Hansgen AR, Wink O, et al. Rapid prototyping:a new tool in understanding and treating structural heart disease. Circulation, 2008, 117(18):2388-2394.
13. Wurm G, Tomancok B, Pogady P, et al. Cerebrovascular stereolithographic biomodeling for aneurysm surgery. Technical note. J Neurosurg, 2004, 100(1):139-145.
14. Giesel FL, Hart AR, Hahn HK, et al. 3D reconstructions of the cerebral ventricles and volume quantification in children with brain malformations. Acad Radiol, 2009, 16(5):610-617.
15. Muller A, Krishnan KG, Uhl E, et al. The application of rapid prototyping techniques in cranial reconstruction and preoperative planning in neurosurgery. J Craniofac Surg, 2003, 14(6):899-914.
16. Guarino J, Tennyson S, McCain G, et al. Rapid prototyping technology for surgeries of the pediatric and pelvis. J Pediatr Orthop, 2007, 27(8):955-960.
17. Brown GA, Firoozabakhsh K, DeCoster TA, et al. Rapid prototyping:the future of trauma surgery? J Bone Joint Surg (Am), 2003, 85-A Suppl 4:49-55.
18. Hurson C, Tansey A, O'Donnchadha B, et al. Rapid prototyping in the assessment, classification and preoperative planning of acetabular fractures. Injury, 2007, 38(10):1158-1162.
19. Kacl GM, Zanetti M, Amgwerd M, et al. Rapid prototyping (stereolithography) in the management of intra-articular calcaneal fractures. Eur Radiol, 1997, 7(2):187-191.
20. Paiva WS, Amorim R, Bezerra DA, et al. Aplication of the stereolithography technique in complex spine surgery. Arq Neuropsiquiatr, 2007, 65(2B):443-445.
21. 戴尅戎, 朱振安, 孙月安, 等. 计算机辅助个体化人工半骨盆的设计与应用. 中华骨科杂志, 2005, 25(5):258-262.
22. Sun W, Li J, Li Q, et al. Clinical effectiveness of hemipelvic reconstruction using computer-aided custom-made prostheses after resection of malignant pelvic tumors. J Arthroplasty, 2011, 26(8):1508-1513.
23. Harrysson OL, Hosni YA, Nayfeh JF. Custom-designed orthopedic implants evaluated using finite element analysis of patient-specific computed tomography data:femoral-component case study. BMC Musculoskelet Disord, 2007, 8:91.
24. He J, Li D, Lu B, et al. Custom fabrication of composite tibial hemi-knee joint combining CAD/CAE/CAM techniques. Proc Inst Mech Eng H, 2006, 220(8):823-830.
25. 王臻, 滕勇, 李涤尘, 等. 基于快速成型的个体化人工半膝关节的研制——计算机辅助设计与制造. 中国修复重建外科杂志, 2004, 18(5):347-351.
26. 滕勇, 王臻, 李迪尘, 等. 快速成型的个体化人工半膝关节的研制——股骨髁的三维建模. 中国修复重建外科杂志, 2004, 18(4):257-260.
27. Kozakiewicz M, Elgalal M, Loba P, et al. Clinical application of 3D pre-bent titanium implants for orbital floor fractures. J Craniomaxillofac Surg, 2009, 37(4):229-234.
28. 李祥, 王成焘. 快速成形技术制造组织工程支架研究进展. 生物工程学报, 2008, 24(8):1321-1326.
29. Peltola SM, Melchels FP, Grijpma DW, et al. A review of rapid prototyping techniques for tissue engineering purposes. Ann Med, 2008, 40(4):268-280.
30. Hoque ME, Hutmacher DW, Feng W, et al. Fabrication using a rapid prototyping system and in vitro characterization of PEG-PCL-PLA scaffolds for tissue engineering. J Biomater Sci Polym Ed, 2005, 16(12):1595-1610.
31. Mironov V, Boland T, Trusk T, et al. Organ printing:computer-aided jet-based 3D tissue engineering. Trends Biotechnol, 2003, 21(4):157-161.
32. Fedorovich NE, Alblas J, de Wijn JR, et al. Hydrogels as extracellular matrices for skeletal tissue engineering:state-of-the-art and novel application in organ printing. Tissue Eng, 2007, 13(8):1905-1925.
33. Billiet T, Vandenhaute M, Schelfhout J, et al. A review of trends and limitations in hydrogel-rapid prototyping for tissue engineering. Biomaterials, 2012, 33(26):6020-6041.
34. Zein I, Hutmacher DW, Tan KC, et al. Fused deposition modeling of novel scaffold architectures for tissue engineering applications. Biomaterials, 2002, 23(4):1169-1185.
35. Samar JK, Bose S, Hosick HL, et al. Development of controlled porosity polymer-ceramic composite scaffolds via dused deposition modeling. Mater Sci Eng, 2003, 23(5):611-620.
36. Endres M, Hutmacher DW, Salgado AJ, et al. Osteogenic induction of human bone marrow-derived mesenchymal progenitor cells in novel synthetic polymer-hydrogel matrices. Tissue Eng, 2003, 9(4):689-702.
37. Hieu LC, Bohez E, Vander Sloten J, et al. Design and manufacturing of cranioplasty implants by 3-axis cnc milling. Technol Health Care, 2002, 10(5):413-423.

Previous Article
3-D打印技术在整形外科的应用
Next Article
RESEARCH PROGRESS OF THREE-DIMENSIONAL PRINTING TECHNIQUE IN JOINT SURGERY

Chinese Journal of Reparative and Reconstructive Surgery

APPLICATION OF THREE-DIMENSIONAL PRINTING TECHNIQUE IN ORTHOPAEDICS

Abstract Full text Figures/Tables Video References Cited by

Previous Article

Next Article

Format

Content