APPLICATION OF THREE-DIMENSIONAL PRINTING TECHNIQUE IN REPAIR AND RECONSTRUCTION OF MAXILLOFACIAL BONE DEFECT_Chinese Journal of Reparative and Reconstructive Surgery

Authors：

YUDan ,  LIUJianhua , ZHUHuiyong , LIZhiyong , HUANGXu , WEIDong , LINYi , HEJianfeng , ZHAOWenquan

Department of Oral and Maxillofacial Surgery, First Affiliated Hospital, Zhejiang University School of Medicine, Hangzhou Zhejiang, 310003, P. R. China;

Corresponding author：

LIUJianhua, Email: timliu@mail.hz.zj.cn

Keywords：

Three-dimensional printing technique; Maxillofacial bone defect repair and reconstruction; Individualized implant

DOI：

10.7507/1002-1892.20140066

Video：

Export PDF Favorites Scan Get Citation

Abstract Full text Figures/Tables Video References Cited by

Objective To explore the application of three-dimensional (3-D) printing technique in repair and reconstruction of maxillofacial bone defect. Methods The related literature on the recent advance in the application of 3-D printing technique for repair and reconstructing maxillofacial bone defect was reviewed and summarized in the following aspects:3-D models for teaching, preoperative planning, and practicing; surgical templates for accurate positioning during operation; individual implantable prosthetics for repair and reconstructing the maxillofacial bone defect. Results 3-D printing technique is profoundly affecting the treatment level in repair and reconstruction of maxillofacial bone defect. Conclusion 3-D printing technique will promote the development of the repair and reconstructing maxillofacial bone defect toward more accurate, personalized, and safer surgery.

Citation： YUDan, LIUJianhua, ZHUHuiyong, LIZhiyong, HUANGXu, WEIDong, LINYi, HEJianfeng, ZHAOWenquan. APPLICATION OF THREE-DIMENSIONAL PRINTING TECHNIQUE IN REPAIR AND RECONSTRUCTION OF MAXILLOFACIAL BONE DEFECT. Chinese Journal of Reparative and Reconstructive Surgery, 2014, 28(3): 292-295. doi: 10.7507/1002-1892.20140066 Copy

1.	Gibson I. Advanced manufacturing technology for medical applications:reverse engineering, software conversion and rapid prototyping. England:John Wiley & Sons Ltd, 2006:1-3.
2.	Bibb R. Medical modelling:the application of advanced design and development techniques in medicine. Boca Raton:CRC Press, 2006:15-16.
3.	Zhou LB, Shang HT, He LS, et al. Accurate reconstruction of discontinuous mandible using a reverse engineering/computer-aided design/rapid prototyping technique:a preliminary clinical study. J Oral Maxillofac Surg, 2010, 68(9):2115-2121.
4.	王成焘. 硬组织外科临床数字技术系统研究. 中国骨科临床与基础研究杂志, 2010, 2(2):87-91.
5.	Derby B. Printing and prototyping of tissues and scaffolds. Science, 2012, 338(6109):921-926.
6.	Klein GT, Lu Y, Wang MY. 3D printing and neurosurgery-ready for prime time? World Neurosurg, 2013, 80(3-4):233-235.
7.	王成焘. 医学的3D打印革命. 中国经济和信息化, 2013, (13):48-49.
8.	Olszewski R. Three-dimensional rapid prototyping models in cranio-maxillofacial surgery:systematic review and new clinical applications. P Belg Roy Acad Med, 2013, 2:43-77.
9.	Cohen A, Laviv A, Berman P, et al. Mandibular reconstruction using stereolithographic 3-dimensional printing modeling technology. Oral Surg Oral Med Oral Pathol Oral Radiol Endod, 2009, 108(5):661-666.
10.	Dziegielewski PT, Zhu J, King B, et al. Three-dimensional biomodeling in complex mandibular reconstruction and surgical simulation:prospective trial. J Otolaryngol Head Neck Surg, 2011, 40 Suppl 1:S70-81.
11.	孙坚. 上颌骨缺损的修复与重建. 口腔颌面外科杂志, 2005, 15(1):5-8.
12.	D'Urso PS, Barker TM, Earwaker WJ, et al. Stereolithographic biomodelling in cranio-maxillofacial surgery:a prospective trial. J Craniomaxillofac Surg, 1999, 27(1):30-37.
13.	Seol YJ, Kang TY, Cho DW. Solid freeform fabrication technology applied to tissue engineering with various biomaterials. Soft Matter, 2012, 8(6):1730-1735.
14.	Marcos Vinícius Marques Anchieta, Marcelo Marques Quaresma, Frederico Assis de Salles. Rapid prototyping applied to maxillofacial surgery//Muhammad Enamul Hoque. Advanced applications of rapid prototyping technology in modern engineering. InTech, DOI:10.5772/25761,2011:153-173.
15.	Ciocca L, Mazzoni S, Fantini M, et al. A CAD/CAM-prototyped anatomical condylar prosthesis connected to a custom-made bone plate to support a fibula free flap. Med Biol Eng Comput, 2012, 50(7):743-749.
16.	Mazzoni S, Marchetti C, Sgarzani R, et al. Prosthetically guided maxillofacial surgery:evaluation of the accuracy of a surgical guide and custom-made boneplate in oncology patients after mandibular reconstruction. Plast Reconstr Surg 2013, 131(6):1376-1385.
17.	Weitz J, Deppe H, Stopp S, et al. Accuracy of templates for navigated implantation made by rapid prototyping with DICOM datasets of cone beam computer tomography (CBCT). Clin Oral Investig, 2011, 15(6):1001-1006.
18.	Narra N, Valášek J, Hannula M, et al. Finite element analysis of customized reconstruction plates for mandibular continuity defect therapy. J Biomech, 2014, 47(1):264-268.
19.	Metzger MC, Vogel M, Hohlweg-Majert B, et al. Anatomical shape analysis of the mandible in Caucasian and Chinese for the production of preformed mandible reconstruction plates. J Craniomaxillofac Surg, 2011, 39(6):393-400.
20.	Kang H, Long JP, UrbielGoldner GD, et al. A paradigm for the development and evaluation of novel implant topologies for bone fixation:implant design and fabrication. J Biomech, 2012, 45(13):2241-2247.
21.	Ciocca L, Mazzoni S, Fantini M, et al. CAD/CAM guided secondary mandibular reconstruction of a discontinuity defect after ablative cancer surgery. J Craniomaxillofac Surg, 2012, 40(8):e511-515.
22.	Leiggener C, Messo E, Thor A, et al. A selective laser sintering guide for transferring a virtual plan to real time surgery in composite mandibular reconstruction with free fibula osseous flaps. Int J Oral Maxillofac Surg, 2009, 38(2):187-192.
23.	徐立群, 陈晓军, 袁建兵, 等. 下颌骨重建腓骨塑形板的试制与初步应用. 中国口腔颌面外科杂志, 2011, 9(6):482-486.
24.	MacLeod AR, Pankaj P, Simpson AH. Does screw-bone interface modelling matter in finite element analyses? J Biomech, 2012, 45(9):1712-1716.

1. Gibson I. Advanced manufacturing technology for medical applications:reverse engineering, software conversion and rapid prototyping. England:John Wiley & Sons Ltd, 2006:1-3.
2. Bibb R. Medical modelling:the application of advanced design and development techniques in medicine. Boca Raton:CRC Press, 2006:15-16.
3. Zhou LB, Shang HT, He LS, et al. Accurate reconstruction of discontinuous mandible using a reverse engineering/computer-aided design/rapid prototyping technique:a preliminary clinical study. J Oral Maxillofac Surg, 2010, 68(9):2115-2121.
4. 王成焘. 硬组织外科临床数字技术系统研究. 中国骨科临床与基础研究杂志, 2010, 2(2):87-91.
5. Derby B. Printing and prototyping of tissues and scaffolds. Science, 2012, 338(6109):921-926.
6. Klein GT, Lu Y, Wang MY. 3D printing and neurosurgery-ready for prime time? World Neurosurg, 2013, 80(3-4):233-235.
7. 王成焘. 医学的3D打印革命. 中国经济和信息化, 2013, (13):48-49.
8. Olszewski R. Three-dimensional rapid prototyping models in cranio-maxillofacial surgery:systematic review and new clinical applications. P Belg Roy Acad Med, 2013, 2:43-77.
9. Cohen A, Laviv A, Berman P, et al. Mandibular reconstruction using stereolithographic 3-dimensional printing modeling technology. Oral Surg Oral Med Oral Pathol Oral Radiol Endod, 2009, 108(5):661-666.
10. Dziegielewski PT, Zhu J, King B, et al. Three-dimensional biomodeling in complex mandibular reconstruction and surgical simulation:prospective trial. J Otolaryngol Head Neck Surg, 2011, 40 Suppl 1:S70-81.
11. 孙坚. 上颌骨缺损的修复与重建. 口腔颌面外科杂志, 2005, 15(1):5-8.
12. D'Urso PS, Barker TM, Earwaker WJ, et al. Stereolithographic biomodelling in cranio-maxillofacial surgery:a prospective trial. J Craniomaxillofac Surg, 1999, 27(1):30-37.
13. Seol YJ, Kang TY, Cho DW. Solid freeform fabrication technology applied to tissue engineering with various biomaterials. Soft Matter, 2012, 8(6):1730-1735.
14. Marcos Vinícius Marques Anchieta, Marcelo Marques Quaresma, Frederico Assis de Salles. Rapid prototyping applied to maxillofacial surgery//Muhammad Enamul Hoque. Advanced applications of rapid prototyping technology in modern engineering. InTech, DOI:10.5772/25761,2011:153-173.
15. Ciocca L, Mazzoni S, Fantini M, et al. A CAD/CAM-prototyped anatomical condylar prosthesis connected to a custom-made bone plate to support a fibula free flap. Med Biol Eng Comput, 2012, 50(7):743-749.
16. Mazzoni S, Marchetti C, Sgarzani R, et al. Prosthetically guided maxillofacial surgery:evaluation of the accuracy of a surgical guide and custom-made boneplate in oncology patients after mandibular reconstruction. Plast Reconstr Surg 2013, 131(6):1376-1385.
17. Weitz J, Deppe H, Stopp S, et al. Accuracy of templates for navigated implantation made by rapid prototyping with DICOM datasets of cone beam computer tomography (CBCT). Clin Oral Investig, 2011, 15(6):1001-1006.
18. Narra N, Valášek J, Hannula M, et al. Finite element analysis of customized reconstruction plates for mandibular continuity defect therapy. J Biomech, 2014, 47(1):264-268.
19. Metzger MC, Vogel M, Hohlweg-Majert B, et al. Anatomical shape analysis of the mandible in Caucasian and Chinese for the production of preformed mandible reconstruction plates. J Craniomaxillofac Surg, 2011, 39(6):393-400.
20. Kang H, Long JP, UrbielGoldner GD, et al. A paradigm for the development and evaluation of novel implant topologies for bone fixation:implant design and fabrication. J Biomech, 2012, 45(13):2241-2247.
21. Ciocca L, Mazzoni S, Fantini M, et al. CAD/CAM guided secondary mandibular reconstruction of a discontinuity defect after ablative cancer surgery. J Craniomaxillofac Surg, 2012, 40(8):e511-515.
22. Leiggener C, Messo E, Thor A, et al. A selective laser sintering guide for transferring a virtual plan to real time surgery in composite mandibular reconstruction with free fibula osseous flaps. Int J Oral Maxillofac Surg, 2009, 38(2):187-192.
23. 徐立群, 陈晓军, 袁建兵, 等. 下颌骨重建腓骨塑形板的试制与初步应用. 中国口腔颌面外科杂志, 2011, 9(6):482-486.
24. MacLeod AR, Pankaj P, Simpson AH. Does screw-bone interface modelling matter in finite element analyses? J Biomech, 2012, 45(9):1712-1716.

Chinese Journal of Reparative and Reconstructive Surgery

APPLICATION OF THREE-DIMENSIONAL PRINTING TECHNIQUE IN REPAIR AND RECONSTRUCTION OF MAXILLOFACIAL BONE DEFECT

Abstract Full text Figures/Tables Video References Cited by

Previous Article

Next Article

Format

Content