Objective To study and compare boneforming mechanismafter compound of autologous periosteum-wrapped tendon with spongiosa homogenate and other implants in articular cavity, and to explore the possibility of the compound as a substitute for the lunate in Kienbock’s disease.Methods Forty-five New Zealand white rabbits were randomly divided into three groups: periosteum group(group A, n=15), composite group(group B, n=15), and control group(group C, n=15). The three sorts of implants were placed into articular cavity of the knee respectively. The changes of bone formation and bone morphogenetic protein (BMP) distribution of the implants were examined under optical microscope with HE and immunohistochemical staining and measured by CT 3, 6 and 9 weeks after operation.Results The result of BMP staining was negative after 3 weeks and positive in new cartilage cells after 9 weeks in group A. The positive BMP staining was observed in group B after 3 weeks and 9 weeks, which mainly distributed in new bone cells and cartilage cells. And negative BMP staining was observed every stage in groupC. The quantitative CT bone mineral density (BMD) values of 3 implants were analyzed, the difference was significant between the groups (Plt;0.01), except that between groups A and C in the 3rd week (Pgt;0.05). Conclusion The above results demonstrated that the compound of autologous periosteum-wrapped tendon and spongiosa homogenate can produce bone and cartilage massively under the induction of periosteum and bone-forming factors such as BMP in spongiosa homogenate and the compound can be used as a substitute for the lunate.
The purpose of this study was to investigate the arterial supply of the pisiform bone. Fifty upper extremities from adult human cadavers of both sexes were studied. The observations showed that there was a small branch(named the main artery of pisiform) arising from the lower part of the ulnar artery in each cases. The mean value of the length of the main artery of the pisiform was 23.89±8.68mm, the diameter of the artery was 0.79±0.21mm. The length, width and thickness of the pisiform were 11. 61±1.98mm, 11.40±1.87mm and 10.30±1.26mm, respectively. The length and width of the space accupied by the lunate on the X-ray films were measured, they were 16.38±1.96mm and 12.03±1.17mm, respectively.
Objective To investigate the long-term effectiveness of Ni-Ti memory alloy tripod fixator in the treatment of Kienböck disease. Methods The clinical data of 22 patients with Kienböck disease who were treated with Ni-Ti memory alloy tripod fixator between January 2011 and September 2013 and followed up more than 10 years was retrospectively analyzed. There were 14 males and 8 females with an average age of 45 years (range, 20-64 years). The Lichtman staging was stage Ⅲb. According to AO/Association for the Study of Internal Fixation (AO/ASIF) classification, there were 6 cases of type B1, 2 cases of type B2, 10 cases of type B3, and 4 cases of type C2. The disease duration ranged from 18 to 50 months, with an average of 30.7 months. The operation time, intraoperative blood loss, and complications were recorded. Wrist height ratio and scapholunate angle were measured by wrist anteroposterior and lateral X-ray films before and after operation. The grip strength of bilateral hands was measured by Jamar dynamometer. The wrist pain was evaluated by visual analogue scale (VAS) score, and the wrist function was evaluated by Mayo score, and the radial deviation, ulnar deviation, dorsiflexion, and palmar flexion range of motion of wrist were measured. Results The operation time was 45-60 minutes, with an average of 52.21 minutes; the intraoperative blood loss was 50-60 mL, with an average of 58.63 mL. No nerve or blood vessel injury occurred during operation. All patients were followed up 10-13 years (mean, 11.3 years). X-ray films at 3 months after operation showed that the density of lunate bone was lower than that before operation. Satisfactory fusion of the scapho-trapezio-trapezoeid joint was achieved at 3-6 months after operation (mean, 4.5 months), and the wrist height ratio and the scapholunate angle after fusion significantly improved when compared with those before operation (P<0.05). Wrist pain relieved, scaphoid rotation and dislocation improved, and no radiocarpal joint degeneration was found during follow-up, and no internal fixator loosening, breakage, or lunate bone necrosis occurred. At last follow-up, the wrist radial deviation, ulnar deviation, dorsiflexion, and palmar flexion range of motion, VAS score, and grip strength of the affected side significantly improved when compared with those before operation (P<0.05); the grip strength of the affected side recovered to 99.00%±1.25% of the healthy side. Mayo score ranged from 72 to 93, with an average of 85; 14 cases were rated as excellent, 5 good, and 3 satisfactory, the excellent and good rate was 86.4%. ConclusionIn the treatment of stage Ⅲb Kienböck’s disease, the scapho-trapezio-trapezoeid joint usion using Ni-Ti memory alloy tripod fixator can effectively reduce pain, improve hand function, and prevent further deterioration, and achieve good long-term effectiveness.
Since 1985, on the basis of anatomical observation of 50 fresh adult specimens, we designed the transposition oF vascularized capitate bone carrying the dorsal branche of the anteriot interosses artery to replace the damaged lunate bone from avascular necrosis. The operation had been done in 6 patients and the follow-up observation (from 6 months to 4 years) showed that the operation was satisfactory. The anatomic basis, the advantages and disadvantages, and the surgical indications were discussed.
Objective To find out some parameters to judge the stability of the wrists after four-corner arthrodesis and to explore the strategyfor improving the range of motion (ROM) of the wrist after four-corner arthrodesis. Methods After the simulated four-corner arthrodesis was performed in both wrists of 8 men and 4 women cadaver, the wrists were fixed on the wrist motor simulator; and wrist movement including flexion, extension, radial deviation, ulnar deviation was simulated. The standard posteroanterior and lateral radiographs were taken for measuring the change of capitolunate angle（α）, radiolunate angle（β）, capitolunate posteroanterior angle（θ）, the height（H）and width（W）of the fused four carpal bone bloc. Results There were statistically significant differences in α,β,θ angles (P＜0.01) in the case of 50° flexion or 40° extension, and in H and W values (P＜0.05) in the case of 25° ulnar deviation or 15° radial deviation when compared with before movement. Conclusion Capitolunate angle, radiolunate angle, capitolunate posteroanterior angle, the height and the width of thefused four carpal bone bloc can be used to judge the stability of the wrists after four-corner arthrodesis.
ObjectiveTo evaluate the long-term effectiveness of lunate excision and vascularized capitate osteotomy transposition for advanced Kienböck's disease. MethodsBetween June 2004 and January 2008,16 patients with Kienböck disease in Lichtman stages ⅢB-IV were treated with lunate excision and vascularized capitate osteotomy transposition.There were 10 males and 6 females at the age of 27-59 years (mean,38.8 years).The disease was caused by trauma in 10 cases,and unknown reason in 6 cases.The main clinical symptoms were pain and limited activity of the wrist joint,and the disease duration was 5-32 months (mean,26.5 months).The carpal height index was 0.88±0.05; the radioscaphoid angle was (63.8±9.1)°.The visual analogue scale (VAS) score,range of motion (ROM),grip strength,Evans score,and radiographic changes were used to assess the effectiveness during follow-up. ResultsAll patients obtained healing of incision by first intention and were followed up 5 years and 4 months to 9 years (mean,5.8 years).VAS score was 2.0±1.5 at the final follow-up.The ROM of the flexion and extension of the wrist joint at the affected side were significantly less than those at the normal side (P<0.05).However,no significant difference was found in the grip strength and Evans score between the affected side and normal side (t=-0.997,P=0.327; t=-1.852,P=0.077).Postoperative radiographs showed that the carpal height index was 0.94±0.03,and the radioscaphoid angle was (48.4±4.8)°,which were improved significantly when compared with preoperative ones (t=-3.927,P=0.000; t=5.987,P=0.000).Osteophyte at the dorsal side of the radius and scaphoid rotation occurred in 6 cases and 2 cases,respectively. ConclusionLunate excision and vascularized capitate osteotomy transposition is a reliable method for advanced Kienböck's disease,with favorable improvement in wrist pain and grip strength for long-term follow-up.
Objective To demonstrate the anatomical and biomechanical basis of scaphoid ring sign in advanced Kienbock’s disease. Methods The study consisted of two sections. The ligaments stabilizing the proximal pole of the scaphoid were observed in 5 specimens. Under 12 kg dead weight load through the tendons of the flexion carpal radial, the flexion carpal ulnar, the extension carpal radial, and the extension carpal ulnar for 5 minutes, the stresses of the scaphoid fossa and lunate fossa were measured in the case of neutral, flexion, extension, radial deviation and ulnar deviation of the wrist joint under normal and rupture conditions respectively by FUJI prescale film and FPD-305E,306E.Results Based on anatomical study, the ligaments stabilizing the proximal pole of the scaphoid consisted of the radioscaphocapitate ligament, long radiolunate ligament and scapholunate interosseous ligament; and the latter two ligaments restricted dorsal subluxation of the proximalpole of the scaphoid. When compared rupture condition with normal condition, thescaphoid fassa stress of radial subregion was not significantly different (0.90±0.43 vs 0.85±0.15), and the ones of palmar, ulnar and dorsal subregions decreased (0.59±0.20, 0.52±0.05 and 0.58±0.23 vs 0.77±0.13, 0.75±0.08 and0.68±0.09) in the case of extension; the scaphoid fassa stresses of all subregions increased or had no difference in the case of neural, flexion, radial deviation and ulnar deviation. The lunate fossa stresses of all subregions increased in thecase of neural, and the ones of all subregions decreased or had no difference inthe case of flexion, extension, radial deviation and ulnar deviation.Conclusion Rotary scaphoid subluxation should be treated operatively at Ⅲ B stage of Kienbock’s disease to avoid traumatic arthritis of theradioscaphoid joint.
ObjectiveTo investigate the effectiveness of Kirschner wire fixation in scapholunate joint, capitolunate joint, and lunotriquetral joint combined with bone anchor repair for the treatment of acute perilunate injury. MethodsBetween January 2007 and January 2012, 35 cases of acute perilunate injury were treated. There were 30 males and 5 females with an average age of 45.5 years (range, 32-56 years). Fractures were caused by falling from height in 18 cases, by traffic accident in 11 cases, and by fall injury in 4 cases. The time from injury to operation was 2-6 days (mean, 3.4 days). There were 23 cases of trans-scaphoid perilunate dislocation, 10 cases of perilunate dislocation, and 2 cases of trans-triangular perilunate dislocation. Associated injuries included median nerve injury in 6 cases, radius styloid fracture in 8 cases, ulnar styloid fracture in 2 cases, and distal tibial fracture in 1 case. All the patients were treated by open reduction, Herbert screw fixation of scaphoid fractures, and Kirschner wire fixation in scapholunate joint, capitolunate joint, and lunotriquetral joint, and the intercarpal ligaments were repaired by Mitek bone anchor. ResultsSuperficial wound infection occurred in 2 cases, and primary healing of incision obtained in others. Thirty-five patients were followed up 12-35 months (mean, 18 months). X-ray films showed fracture union in 21 cases of scaphoid fractures, and bone nonunion in 2 cases of scaphoid fractures. During the follow-up period, there was no avascular necrosis of scaphoid or lunate. At last follow-up, the scapholunate angle, radiolunate angle, and wrist range of motion (ROM) in extension had no significant difference between affected and unaffected sides (P > 0.05). The wrist ROM in flexion and grip strength of affected side were not up to the levels of unaffected side (P < 0.05). According to the modified Mayo wrist scoring system, the score was 79.9±10.7, which were excellent in 8 cases, good in 17 cases, fair in 7 cases, and poor in 3 cases, and the excellent and good rate was 71.4%. The disability of arm-shoulder-hand (DASH) questionnaires score was 21±10. Traumatic osteoarthritis was observed in 2 cases. ConclusionKirschner wire fixation in scapholunate joint, capitolunate joint, and lunotriquetral joint combined with bone anchor repair for the treatment of acute perilunate injury can get early stability of the carpal joint, favorable intercarpal ligament repair, and good recovery of wrist joint function.
Objective To design customized titanium alloy lunate prosthesis, construct three-dimensional finite element model of wrist joint before and after replacement by finite element analysis, and observe the biomechanical changes of wrist joint after replacement, providing biomechanical basis for clinical application of prosthesis. Methods One fresh frozen human forearm was collected, and the maximum range of motions in flexion, extension, ulnar deviation, and radialis deviation tested by cortex motion capture system were 48.42°, 38.04°, 35.68°, and 26.41°, respectively. The wrist joint data was obtained by CT scan and imported into Mimics21.0 software and Magics21.0 software to construct a wrist joint three-dimensional model and design customized titanium alloy lunate prosthesis. Then Geomagic Studio 2017 software and Solidworks 2017 software were used to construct the three-dimensional finite element models of a normal wrist joint (normal model) and a wrist joint with lunate prosthesis after replacement (replacement model). The stress distribution and deformation of the wrist joint before and after replacement were analyzed for flexion at and 15°, 30°, 48.42°, extension at 15°, 30°, and 38.04°, ulnar deviation at 10°, 20°, and 35.68°, and radial deviation at 5°, 15°, and 26.41° by the ANSYS 17.0 finite element analysis software. And the stress distribution of lunate bone and lunate prosthesis were also observed. Results The three-dimensional finite element models of wrist joint before and after replacement were successfully constructed. At different range of motion of flexion, extension, ulnar deviation, and radial deviation, there were some differences in the number of nodes and units in the grid models. In the four directions of flexion, extension, ulnar deviation, and radial deviation, the maximum deformation of wrist joint in normal model and replacement model occurred in the radial side, and the values increased gradually with the increase of the range of motion. The maximum stress of the wrist joint increased gradually with the increase of the range of motion, and at maximum range of motion, the stress was concentrated on the proximal radius, showing an overall trend of moving from the radial wrist to the proximal radius. The maximum stress of normal lunate bone increased gradually with the increase of range of motion in different directions, and the stress position also changed. The maximum stress of lunate prosthesis was concentrated on the ulnar side of the prosthesis, which increased gradually with the increase of the range of motion in flexion, and decreased gradually with the increase of the range of motion in extension, ulnar deviation, and radialis deviation. The stress on prosthesis increased significantly when compared with that on normal lunate bone. Conclusion The customized titanium alloy lunate prosthesis does not change the wrist joint load transfer mode, which provided data support for the clinical application of the prosthesis.
Objective To review the progress in the cl inical treatment of Kienbouml;ck’s disease. Methods Related l iterature concerning the treatment of Kienbouml;ck’s disease was reviewed, and comprehensive analysis was done. Results The treatment methods of Kienbouml;ck’s disease include non-surgical treatment and surgical treatment, which are primarily guided bythe anatomic factor and Lichtman stage. Non-surgical treatment methods should be selected in patients of children and at stage I. Surgical treatment methods include vascularized bone graft transfer into the cored-out lunate, radial shortening osteotomy, radial lateral wedge osteotomy, etc. All surgical treatment methods have advantages and disadvantages. Conclusion For the treatment of Kienbouml;ck’s disease, none of procedure is superior to another. In short, choosing different treatment strategies based on different patients can achieve the desired outcome.