Objective To compare the effectiveness between minimally invasive cannulated screw and open reduction and plate fixation in treatment of humeral greater tuberosity fracture by a prospective case-control study. Methods Between January 2008 and January 2011, 49 cases of humeral greater tuberosity fractures were treated with minimally invasive cannulated screw in 25 cases (trial group), and with open reduction and plate fixation in 24 cases (control group). There was no significant difference in gender, age, injury cause, disease duration, fracture displacement, injury side, and complications between 2 groups (P gt; 0.05). The length of incision, operation time, intraoperative blood loss, and hospitalization days were recorded. According to Neer grading system, the effectiveness was evaluated; fracture healing was observed by X-ray films. Results The trial group had smaller incision, shorter operation time, less blood loss, and shorter hospitalization days than the control group, showing significant differences (P lt; 0.01). Superficial infection occurred in 2 cases of the control group, and were cured after symptomatic treatment; primary healing of incision was obtained in the others of 2 groups. All patients were followed up 1-4 years (mean, 2.3 years). The fracture healing time was (7.0 ± 2.3) weeks in the trial group, and was (7.8 ± 2.1) weeks in the control group, showing no significant difference (t=1.24, P=0.22). No heterotopic ossification or loosening and breakage of internal fixation occurred during follow-up. The shoulder function Neer score of the trial group (86.3 ± 2.8) was significantly higher than that of the control group (80.1 ± 2.1) (t=6.37, P=0.00). The results were excellent in 14 cases, good in 8 cases, fair in 2 cases, and poor in 1 case with an excellent and good rate of 88.0% in the trial group; the results were excellent in 12 cases, good in 7 cases, fair in 2 cases, and poor in 3 cases with an excellent and good rate of 79.2% in the control group; and difference had no statistical significance (Z=0.83, P=0.41). Conclusion Compared with open reduction and plate fixation, minimally invasive cannulated screw for greater tuberosity fracture has the advantages of simple operation, less trauma, less intraoperative blood loss, and good shoulder function recovery.
Objective To explore the technique and effectiveness of percutaneous retrograde cannulated screw fixation for acute stable scaphoid waist fracture by a transtrapezial approach. Methods Between May 2010 and April 2012, 23 patients with acute stable scaphoid waist fracture were treated with percutaneous retrograde cannulated screw fixation by a transtrapezial approach. There were 18 males and 5 females, aged 21-54 years with an average of 32 years. All fractures were caused by supporting with hands after falling. The locations were the left side in 10 cases and the right side in 13 cases. The major symptoms included the wrist swelling, tenderness at the anatomic snuff box, and grip weakness. Two cases were accompanied by distal radius fractures. The time between injury and operation ranged from 1 to 5 days with an average of 3 days. Results All incisions healed by first intention. All the cases were followed up 4-26 months with an average of 10 months. All fractures healed 6-12 weeks postoperatively with an average of 8.2 weeks. The patients resumed normal life and work at 4-6 weeks and at 2-4 months after operation, respectively. At last follow-up, all the wrists were free from the pain and the tenderness. The postoperative grip power ranged from 30 to 51 kg (mean, 37 kg). The active flexion-extension range of motion was 140-165° with an average of 153.7°. All patients were satisfied with the results of treatment. Conclusion Percutaneous retrograde cannulated screw fixation by a transtrapezial approach is a simple, safe, and reliable method to treat acute stable scaphoid waist fracture. By this approach, it is easier to place the screws into the center of the long axis of scaphoid.
Objective To compare the curative effect of dynamic hi p screw (DHS) combined with anti-rotation screw and cannulated screw in treating patients with Pauwels type II or III femoral neck fracture and to provide the basis for the choice of surgical procedure. Methods Between March 2008 and September 2009, 51 patients with fresh Pauwels type II or III femoral neck fracture were treated with DHS combined with anti-rotation screw (DHS group) and three cannulated screws (cannulated screw group). The DHS group included 23 patients, 13 males and 10 females, aging 27-59 years (mean, 43.2 years); fracture was caused by fall ing in 1 case, by traffic accident in 17, by fall ing from height in 5 with a mean time of 27 hoursfrom injury to hospital ization (range, 12-70 hours); and 23 fractures included 9 Pauwels type II and 14 Pauwels type III femoral neck fracture. The cannulated screw group included 28 patients, 12 males and 16 females, aging 20-60 years (mean, 40.7 years); fracture was caused by fall ing in 1 case, by traffic accident in 22, by fall ing from height in 5 with a mean time of 25 hours from injury to hospital ization (range, 9-38 hours); and 28 fractures included 12 Pauwels type II and 16 Pauwels type III femoral neck fracture. There was no significant difference in the basel ine characteristics between 2 groups (P gt; 0.05). Results The incision heal ing of both groups by first intention was achieved. There were significant differences in operation time, incision size, operation blood loss, the cases of blood transfusion, the amount of blood transfusion, C reaction protein level on the 2nd postoperative day, and hospital ization days between 2 groups (P lt; 0.05). In DHS group, anatomic reduction was observed in 20 cases (86.96%) and satisfactory reduction in 3 cases (13.04%), while in cannulated screw group, anatomic reduction was observed in 25 cases (89.29%) and satisfactory reduction in 3 cases (10.71%) ; there was no significant difference (χ2=0.660, P=1.000). The patients were followed up 12-30 months with an average of 14.8 months. There was no significant difference (P gt; 0.05) in the rate of nonunion (10.71% vs. 0), the implant failure (3.57% vs. 0), and avascular necrosis of the femoral head (10.71% vs. 0) between the DHS group and the cannulated screw group. The union time was (94.5 ± 2.0) days in the DHS group and (106.0 ± 33.5) days in the cannulated screw group, showing no significant difference (t=—1.641, P=0.107). The re-opereation rates and the overall success rates were 25% and 75% in the cannulated group and were 0 and 100% in the DHS group, showing significant differences (χ2=6.650, P=0.012). At last follow-up, there was no significant difference in Harris hip score and visualanalogue scale (VAS) score between DHS group and cannulated screw group (P gt; 0.05). Conclusion The optimal treatment of young adults Pauwels type II or III femoral neck fracture is DHS combined with anti-rotation screw with an high overall success and less compl ications.
Objective To explore the treatment of low-energy tibial plateau fractures with arthroscopic percutaneous osteosynthesis. Methods From May 2004 to April 2008, 27 cases of tibial plateau fractures were treated with arthroscopic management. There were 19 males and 8 females, aged 18-61 years old (mean 41.5 years old). Fracture was caused by trafficaccident in 18 cases, by fall ing from height in 6 cases, by bruise in 2 cases, and by other in 1 case. There were 8 cases of type I, 12 cases of type II, 2 cases of type III and 5 cases of type IV according to Schatzker classification. The time from injury to operation was 3-15 days (mean 5.2 days). After symptomatic managements were performed arthroscopically in 11 cases of meniscus tear, 4 cases of medial collateral l igament rupture of knee joint, 3 cases of anterior cruciate l igament rupture of knee joint and 2 cases of cartilage fracture resulting in joint bodies, fracture was reduced and fixed with 2 or 4 cannulated screws (7 mm in diameter). Autograft of il ium was given 6 cases of bone defect. Early functional exercise was done. Results The operation time was 55-150 minutes (mean 93 minutes); the hospital ization days were 7-22 days (mean 16 days). All incision healed primarily. Edema of the affected leg occurred in all patients and subsided after 3 days of symptomatic management. In one patient who did not cooperate in functional exercise, adhesion occurred and normal function was recovered after by manual dissolution under conditions of anesthesia after 3 months of operation. All patients were followed up 6-36 months (mean 16.6 months). The range of motion of knee joint was 105-140° (mean 121°). According to Lysholm scale of knee joint, the score was 72-100 points (mean 93.6 points) 6 months after operation. The X-ray film showed no signs of osteoarthritis. Conclusion Arthroscopic percutaneous osteosynthesis yields satisfactory results and can be accepted as an alternative and effective method for the treatment of low-energy tibial plateau fractures.
Objective To evaluate the clinical effect of cannulatedscrew on treatment of femoral neck fracture(FNF). Methods Forty-two FNFpatients were treated by using cannulated screw from January 2001 to December 2005.There were 22males and 20 females with an average age of 41 years (19-59 years). Fracture was caused by traffic accident in 21 cases, by falling from height in 14 cases and by bruise in 7 cases. All cases were fresh fracture. According to Garden criterion for typing, 15 cases were classified as type Ⅱ, 16 cases as type Ⅲ and 11 cases as type Ⅳ . It was 7 hours to 15 days from injury to operation. Results Thepatients were followed up for 1-6 years with an average of 2.5 years. The average fracture union time was 6.5 months. Three patients had ischemic necrosis of femoral head, andloosening and breakage of screw and rob was observed in 1 case. According to Brumback criterion for hip joint function, the result was excellent in 18 cases, good in 20 cases and bad in 4 cases, and the excellent and good rate was 90.4%. Conclusion Cannulated screw fixation is a good method to treat FNF in young adults. It can improve the rate of fracture union and reduce the rate of avascular necrosis of femoral head.
ObjectiveTo design the channels of parallel screws and cross screws for fixation of symphysis pubis diastasis through a small sample anatomic study on pubic symphysis and its neighbor structures so as to provide anatomical basis for minimally invasive fixation of symphysis pubis diastasis. MethodsEight cadaveric pelvic specimens (6 men and 2 women) were transected along L5 and the proximal 1/3 of bilateral thighs, with intact lumbar spines. The spermatic cord, womb round ligament, and corona mortis were dissected; the distance to the ipsilateral pubic tubercle was measured and subsequently the distance between pubic tubercles, the height of pubic symphysis, the diameter of outer edge of pubic tubercle, the thickness of pubic symphysis and 2 cm outside the pubic symphysis (upper, central, and lower 1/3 thickness of pubic symphysis) were measured to provide anatomical basis for the design of channels of parallel screws and cross screws. ResultsParallel screw fixation: the entry point of first screw was on the outer edge of pubic tubercle, and its exit point was on the outer edge of contralateral pubic tubercle; a cannulated screw with a diameter of 4.5 mm or 6.5 mm can be suitable for this channel. The entry point of second screw was 20 mm outside the pubic symphysis and 23 mm beneath the pubic symphysis, and its exit point was symmetrical with entry point; a cannulated screw with a diameter of 4.5 mm can be appropriate for the second channel. The direction of two screws was perpendicular to the pubic symphysis. Cross screw fixation: the entry point of cross screws was on one side of the pubic tubercle, and its exit point was 20 mm outside the contralateral pubic symphysis and 23 mm beneath the contralateral pubic symphysis; two cannulated screws with a diameter of 4.5 mm can be chosen for cross screws channels. The direction of two cross screws was intersected with the horizontal line of two pubic tubercles at an angle of 25° respectively; besides, two cross screws formed an anteversion angle and retroversion angle of 5-10° with pubic body plane, respectively. ConclusionThe channels of parallel screws and cross screws are feasible for fixation of symphysis pubis diastasis by analyzing the anatomical data of the pubic symphysis and its neighbor structures, but further biomechanical research is need to confirm the stability of two fixation methods.
ObjectiveTo summarize the progress in treatment of pubic symphysis diastasis. MethodsRelated literature concerning treatment of pubic symphysis diastasis was extensively reviewed and comprehensively analyzed in terms of anatomy, biomechanics, and treatment. ResultsThere are many fixation methods for treatment of pubic symphysis diastasis, which aims at restoring the stability of the anterior pelvic ring. External fixator is often used as a temporary fixation; tension band wire has been abandoned due to its poor biomechanical stability; screw loosening and plate breakage often appears when a single reconstruction plate is used; box plate significantly increases the biomechanical stability of anterior pelvic ring but it leads to a considerable surgical trauma; locking plate has been used for pubic symphysis diastasis recently, especially for osteoporotic fractures; percutaneous cannulated screw has the advantages of less trauma, less bleeding, and good stability, so it is good choice for treatment of pubic symphysis diastasis. ConclusionThere is no uniform standards about the treatment of pubic symphysis diastasis, but the minimally invasive treatment is an undeniable trend. Percutaneous cannulated screw has achieved satisfactory effectiveness, however, its biomechanical stability and anatomic channels need to be further studied.
ObjectiveTo evaluate the technique and the effectiveness of arthroscopic fixation with percutaneous cannulated screws for acute displaced isolated greater tuberosity fractures of the proximal humerus. MethodsA retrospective analysis was made on the clinical data of 15 patients with acute displaced isolated greater tuberosity fractures of the proximal humerus, who accepted arthroscopic percutaneous cannulated screw fixation treatment between January 2010 and February 2013. There were 8 males and 7 females with an average age of 44.9 years (range, 31-66 years). Eight left shoulders and 7 right shoulders were affected. The mean interval of injury and operation was 9.9 days (range, 4-19 days). Before operation, the average range of motion (ROM) values of the affected shoulder were (74.13±17.19)° in forward flexion, (121.67±17.50)° in abduction, (T11±2)° in internal rotation, and (39.27±8.08)° in external rotation; the visual analogue scale (VAS) score was 6.46±1.30; and Costant score was 62.27±11.90. ResultsOperations were all successfully completed and incision healed by first intention in all cases. All cases were followed up 12-27 months (mean, 15 months). Postoperative X-ray films showed good reduction, alignment, and union of fracture. The average fracture healing time was 8 weeks (range, 6-13 weeks). At last follow-up, the ROM of the affected shoulder were significantly improved to (169.33±7.99)° in forward flexion, (156.67±10.47)° in abduction, (T6±2)° in internal rotation, and (71.67±7.94)° in external rotation (P<0.05); the VAS score was significantly reduced to 1.73±1.02 (t=-8.51, P=0.00); and the Costant score was significantly increased to 96.20±2.34 (t=11.50, P=0.00). No complication was found, such as neural or vascular injury, infection, shoulder joint adhesion, fixation failure, or fracture displacement. ConclusionArthroscopic fixation with percutaneous cannulated screws is a safe method to treat acute displaced isolated greater tuberosity fractures of the proximal humerus, and it has good short-term effectiveness with the advantages of little trauma and satisfactory functional recovery.
Objective To investigate the effectiveness and the advantage of fixation with percutaneous cannulated screws assisted by robot navigation in the treatment of femoral neck fractures by comparing with the conventional surgery. Methods Between January 2013 and December 2014, 20 patients with femoral neck fracture were treated by internal fixation with percutaneous cannulated screws assisted by robot navigation (navigation group), another 18 patients undergoing conventional surgery with manual positioning were chosen as the control group. There was no significant difference in gender, age, cause of injury, the injury side, time from injury to operation, and the classification of fractures between 2 groups (P > 0.05). The operation time, X-ray fluoroscopy time, blood loss, frequency of guide pin insertion, and healing time were recorded. At 1 week after operation, the parallel degree of screws was measured on the anteroposterior and lateral X-ray films; the Harris score was used to evaluate the hip function. Results All incisions of 2 groups healed by first intention after operation. There was no significant difference in operation time between 2 groups (t= -1.139, P=0.262). The blood loss, frequency of guide pin insertion, and X-ray fluoroscopy time of navigation group were significantly less than those of control group (P < 0.05). There were 2 screws penetrating into the joint cavity in control group. The patients were followed up 12-24 months with an average of 18 months. The navigation group got significantly better parallel degree of screws than control group on the anteroposterior and lateral X-ray films (t=25.021, P=0.000; t=18.659, P=0.000). Fractures healed in all patients of navigation group (100%), and the healing time was (21.8±2.8) weeks; fracture healed in 16 patients of control group (88.9%), and the healing time was (24.0 ± 3.7) weeks. There was no significant difference in healing rate and healing time between 2 groups (χ2=2.346, P=0.126; t=1.990, P=0.055). The Harris score of navigation group (87.1±3.7) was significantly higher than that of control group (79.3±4.7) at last follow-up (t= -5.689, P=0.000). Conclusion Cannulated screw fixation assisted by robot navigation is a good method to treat femoral neck fractures, which has the advantages of more accurate positioning, better hip function recovery, less surgical trauma, and shorter X-ray exposure time.
ObjectiveTo study intraoperative reduction strategy in treatment of femoral neck fracture using cannulated screw fixation and the relationship between excellent and good rate of reduction and postoperative effectiveness. MethodsA retrospective analysis was made on the clinical data of 174 cases of femoral neck fracture treated between August 2005 and March 2015. There were 78 males and 96 females with an average age of 53.8 years (range, 23-75 years). The injury causes were falling in 85 cases, traffic accident in 61 cases, and falling from height in 28 cases. According to Garden typing, there were 35 cases of type I, 56 cases of typeⅡ, 47 cases of typeⅢ, and 36 cases of typeⅣ. The time from injury to operation was 1-7 days (mean, 2.74 days). Based on reduction strategy, closed 3 hollow compression screws were used; evaluating standards for fracture reduction effect were also established. Harris score was used for effectiveness evaluation. ResultsAll the cases received follow-up of 12-42 months (mean, 36.5 months). Bone healing was obtained in 152 cases at 6-12 months (mean, 9 months). Non-union and internal fixation failure occurred in 9 and 3 patients respectively, who underwent hemiarthroplasty; femoral head necrosis occurred in 6 patients after removing internal fixator at 15-26 months (mean, 18.5 months) after operation, who underwent total hip arthroplasty; 4 patients with non-union received vascular pedicle iliac flap transplantation. No other serious complications were observed. At last follow-up, the excellent and good rate of reduction was 94.29% for Garden type I, 91.07% for typeⅡ, 87.23% for typeⅢ, and 75.00% for typeⅣ, with a total excellent and good rate of 87.36%; the excellent and good rate of Harris score was 97.14% for Garden type I, 78.57% for typeⅡ, 68.09% for typeⅢ, and 50.00% for typeⅣ, with a total excellent and good rate of 73.56%. ConclusionTo obtain high Harris score in fixation of femoral neck fractures by using hollow screws, surgeons not only need reasonable technology, but also follow correct and good reduction strategy and assessment, fracture complexity is inversely proportional to excellent and good rate of reduction. Higher excellent and good reduction rate of complexity fracture should be obtained as much as possible in order to achieve good prognosis.