Severe trauma is a challenging medical problem. Uncontrolled post-traumatic hemorrhage and traumatic coagulation dysfunction are closely related to the prognosis of these patients. In May 2019, the pan-European, multidisciplinary Task Force for Advanced Bleeding Care in Trauma published the fifth edition of the European guideline on management of major bleeding and coagulopathy following trauma. To assist Chinese in better understanding of the latest developments, this paper translated the main treatment recommendations in the guideline and interpreted the updated content from the fourth edition.
Objective To summarize the molecular biological research progress of non-coding RNAs modulating osteoarthritis (OA), and provide a reference basis for biological study and clinical treatment of OA. Methods Recent domestic and foreign related literature about the regulation of OA pathological process by non-coding RNAs was widely reviewed. Results Non-coding RNAs can be divided into three types based on the length of RNA. A lot of non-coding RNAs participating in OA pathological process are screened out by high throughput sequencing technology and microarray technology, and it is verified that these non-coding RNAs involve in the regulation of OA by RT-PCR. The mechanism of OA mediated target is clarified by knocking-down and overexpressing of the most prominent expressed non-coding RNAs in OA. There are the complicated gene expressed network topology in non-coding RNAs, and between non-coding RNAs and coding RNAs. It provides a basis for clearing the effect of gene structure and function, and finding the definite therapeutic target of OA. Conclusion There is preliminary study on molecular biological mechanism of non-coding RNAs mediating OA, but the key structure or sequence of non-coding RNAs, formation and interaction of effecting composite structure about mediating OA are unknown, and it needs further study.
ObjectiveTo systematically review the efficacy and safety of intravascular cooling versus surface cooling for induced mild hypothermia on the prognosis of patients with cardiac arrest (CA) after resuscitation.MethodsPubMed, EMbase, The Cochrane Library, CNKI and WanFang Data databases were electronically searched to collect cohort studies and randomized controlled trials (RCTs) about the efficacy and safety of intravascular cooling versus surface cooling for CA patients after resuscitation from inception to July 2019. Two reviewers independently screened literature, extracted data and assessed the risk of bias of included studies, then, meta-analysis was performed by using Stata 13.0 software.ResultsA total of 9 cohort studies and 3 RCTs involving 2 104 patients were included. The results of meta-analysis showed that: the rate of good neurological function was significantly higher (OR=1.45, 95%CI 1.18 to 1.78, P<0.001) and the induction time was significantly shorter (SMD=−1.35, 95%CI −2.34 to −0.36, P=0.008) in the intravascular cooling group, but there was no statistical difference in mortality between two groups (OR=0.84, 95%CI 0.70 to 1.00, P=0.053). In terms of complications related to mild hypothermia, the rate of excessive hypothermia (OR=0.27, 95%CI 0.18 to 0.41, P<0.001) and arrhythmia (OR=0.60, 95%CI 0.40 to 0.89, P=0.012) was significantly lower in the patients treated with intravascular cooling, but the incidence of coagulopathy was higher (OR=1.61, 95%CI 1.05 to 2.49, P=0.03). There was no statistical difference in the incidence of pneumonia between two groups (OR=1.20, 95%CI 0.94 to 1.53, P=0.147).ConclusionCurrent evidence shows that intravascular cooling has significant neurological protection for patients with CA compared with surface cooling since it can decrease the induction time and the rate of excessive hypothermia and arrhythmia, but it may have a negative effect on the coagulation function. Due to the limited quality and quantity of the included studies, more high-quality studies are needed to verify the above conclusion.
ObjectiveTo investigate the effectiveness of the posterior-posterior triangulation technique for arthroscopic posterior cruciate ligament (PCL) reconstruction by comparing with the anteroposterior approach.MethodsRetrospective analysis was performed on 40 patients who underwent arthroscopic PCL reconstruction between February 2016 and February 2020. The PCLs were reconstructed via anteroposterior approach in 20 patients (anteroposterior approach group) and posterior-posterior triangulation technique in 20 patients (posterior-posterior triangulation technique group). There was no significant difference in gender, age, cause of injury, injury side, disease duration, preoperative International Knee Documentary Committee (IKDC) score, and Lysholm score between the two groups (P>0.05). The operation time, surgical complications, and postoperative posterior drawer test, Lysholm score, and IKDC score were recorded and compared between the two groups.ResultsThe operation time was (65.25±10.05) minutes in the anteroposterior approach group and (56.15±8.15) minutes in the posterior-posterior triangulation technique group, and the difference was significant (t=3.145, P=0.003). All incisions healed by first intention, and there was no complication such as vascular and nerve injuries or infection. Patients were followed up (27.05±11.95) months in the anteroposterior approach group and (21.40±7.82) months in the posterior-posterior triangulation technique group, with no significant difference (t=1.770, P=0.085). At last follow-up, the posterior drawer tests were positive in 4 cases (3 cases of stageⅠand 1 case of stage Ⅱ) of the anteroposterior approach group and in 1 case (stageⅠ) of the posterior-posterior triangulation technique group, showing no significant difference between the two groups (P=0.342). At last follow-up, Lysholm score and IKDC score in both groups were significantly higher than those before operation (P<0.05). The above functional scores in the posterior-posterior triangulation technique group were significantly higher than those in the anteroposterior approach group (P<0.05). Imaging reexamination showed that the position, shape, and tension of the grafts were well in both groups, and the grafts were covered with the synovium in the posterior-posterior triangulation technique group, the meniscofemoral ligaments were well preserved. There was no re-rupture of the reconstructed ligament during follow-up.ConclusionCompared to the anteroposterior approach, the posterior-posterior triangulation technique provides a clearer view under arthroscopy, no blind spot, sufficient operating space, and relative safety. Moreover, it is easier to retain the remnant and the meniscofemoral ligaments, and can obtain good short-term effectiveness.
Objective To establish a three-dimensional finite element analysis model of the knee joint in fresh frozen cadavers, to verify the validity of the model and to simulate the stress distribution characteristics of the patellofemoral joint after combined proximal and distal knee extension rearrangement surgery for recurrent patellar dislocation. Methods One male and one female fresh frozen cadavers (4 knees in total), using voluntary body donations, were used to measure the maximum pressure on the patellofemoral articular surface at each passive flexion angle (0°, 30°, 60°, 90°, 120°) of the normal knee joint and the model after combined proximal and distal knee extension rearrangement surgery for recurrent patellar dislocation with tibial tuberosity-trochlear groove distance (TT-TG) value >2.00 cm using pressure-sensitive paper, respectively. Then, the 2 freshly frozen cadavers were used to construct three-dimensional finite element models of normal knee joints and postoperative knee joints, and the maximum pressure on the patellofemoral articular surface was measured at various passive flexion angles. The maximum pressure was compared with the measurement results of the pressure-sensitive paper to verify the validity of the three-dimensional finite element model. In addition, the maximum pressure on the patellofemoral joint surface measured by three-dimensional finite element was compared between the normal knee joint and the postoperative knee joint at various passive flexion angles, so as to obtain an effective three-dimensional finite element model for the simulation study of the stress distribution characteristics of the patellofemoral joint after combined proximal and distal knee extension rearrangement surgery for recurrent patellar dislocation. ResultsThe maximum pressure on the patellofemoral joint surface measured by pressure-sensitive paper and three-dimensional finite element measurements were similar at all passive flexion angles in the normal knee joint, with a difference of −0.08-0.06 MPa; the maximum pressure on the patellofemoral joint surface measured by pressure-sensitive paper and three-dimensional finite element measurements were also similar at all passive flexion angles in the knee after combined proximal and distal knee extension rearrangement surgery, with a difference of −0.04-0.09 MPa. The maximum pressure on the patellofemoral joint surface measured by three-dimensional finite elements were also similar between the normal knee joint and the knee joint after combined proximal and distal knee extension rearrangement surgery at all passive flexion angles, with a difference of −0.50-−0.03 MPa. ConclusionThe three-dimensional finite element model of the normal knee joint and the knee joint after combined proximal and distal knee extension rearrangement surgery can accurately and effectively quantify the change in the maximum pressure on the patellofemoral joint surface; for recurrent patellar dislocations with TT-TG value>2.00 cm, the combined proximal and distal knee extension rearrangement surgery can achieve a maximum pressure of the patellofemoral joint surface similar to that of the normal knee joint.
ObjectiveTo investigate the short-term effectiveness of total knee arthroplasty (TKA) assisted by three-dimensional (3D) printing osteotomy navigation template.MethodsA retrospective study was performed on 60 patients with osteoarthritis bewteen January 2016 and June 2017. Thirty cases underwent TKA assisted by 3D printing osteotomy navigation template (3D printing group) and 30 cases underwent the conventional TKA (conventional TKA group). There was no significant difference in gender, age, body mass index, surgical side, and disease duration between 2 groups (P>0.05). The operation time, the pre- and post-operative hemoglobin values, the amount of drainage, the Hospital for Special Surgery (HSS) score and Knee Society Score (KSS) of knee joint before operation and at 3 months after operation were observed. And 6 freedom degrees of knee (the varus and valgus angle, the internal and external rotation angle, the antero-posterior displacement, the proximal-distal displacement, the flexion and extension angle, and the internal and external displacement) before operation and at 3 months after operation were recorded by Opti-Knee (the knee 3D motion analysis system). The values of 2 groups were compared with 30 healthy adults (<60 years).ResultsThe operation time was shorter in 3D printing group than that in conventional TKA group (t=5.833, P=0.000). The hemoglobin values at 1 and 3 days after operation were higher in 3D printing group than those in conventional TKA group (P<0.05). The amount of drainage was less in 3D printing group than that in conventional TKA group (t=5.468, P=0.000). All patients were followed up 6-9 months (mean, 7.3 months). There was no significant difference in pre- and post-operative HSS score and KSS clinical score between 2 groups (P>0.05). There was no significant difference in preoperative KSS function score between 2 groups (P>0.05), but the KSS function score of 3D printing group at 3 months after operation was higher than that of conventional TKA group (P<0.05). Before operation, the varus and valgus angle, the internal and external rotation angle, the antero-posterior displacement, the proximal-distal displacement of 3D printing group and conventional TKA group were larger than that of the healthy adults (P<0.05); there was no significant difference in the flexion and extension angle and the internal and external displacement between 2 groups and healthy adults (P>0.05). At 3 months after operation, compared with healthy adults, the varus and valgus angle of conventional TKA group was increased, the flexion and extension angle of conventional TKA group was decreased (P<0.05); the proximal-distal displacement and the internal and external displacement of 2 groups were decreased (P<0.05); there was no significant difference in other freedom degrees between groups (P>0.05). No sign of prosthesis loosening was observed by X-ray examination.ConclusionCompared with the traditional TKA, TKA assisted by the 3D printing osteotomy navigation template had such advantages as shorter operation time, less postoperative blood loss, and well postoperative recovery.
Objective To explore the mid-term effectiveness of combined knee extensor mechanism realignment with bone anchor for recurrent patella dislocation. Methods Between August 2017 and May 2019, 21 patients with recurrent patella dislocation underwent combined knee extensor mechanism realigament with bone anchor and followed up more than 3 years. There were 8 males and 13 females with an average age of 19.4 years (range, 13-26 years). All 21 patients had a history of recurrent patellar dislocation for 2-5 times (median, 3 times), and the disease duration was 1-16 years (mean, 5 years). The preoperative Lysholm score was 67.5±6.3 and the Kujula score was 64.1±7.0. The defect of meniscus, anterior and posterior cruciate ligaments, and medial and lateral collateral ligaments were excluded by MRI examination; CT examination showed that the tibial tuberosity-trochlear groove distance was 2.05-2.56 cm, with an average of 2.16 cm; X-ray examination showed that lower limb force line was abnormal. The effectiveness were evaluated by Lysholm score and Kujula score before operation and at 3 years after operation, and Insall evaluation standard at 3 years after operation. Results All the incisions healed by first intention, and there was no surgical complication such as lower extremity deep vein thrombosis, incision infection, and nerve injury. All 21 patients were followed up 3.0-3.5 years, with an average of 3.2 years. Anteroposterior and lateral X-ray films of the knee joint at 3 years after operation showed that the position of the patella was normal, and the axial X-ray films of the patella (30°, 60°, 90°) showed that the patellofemoral joint had a good relationship. During the follow-up, there was no anchor drop or fracture, no obvious pseudarthrosis formation, and no epiphyseal injury in the minor patients. The Lysholm score was 91.5±7.1 and the Kujula score was 88.1±7.6 at 3 years after operation, which were significantly improved when compared with those before operation (t=11.57, P=0.00; t=12.78, P=0.00). According to the Insall evaluation criteria, 12 cases were excellent, 4 cases were good, 4 cases were fair, and 1 case was poor, with an excellent and good rate of 76.2%. ConclusionCombined knee extensor mechanism realignment with bone anchor is a simple and reliable way to treat the recurrent patella dislocation, with a satisfactory mid-term effectiveness and less complications; however, its long-term effectiveness needs further follow-up.