【摘要】 目的 优选出紫冰栓中紫草油的最佳提取工艺。 方法 以左旋紫草素的含量为工艺考察指标，使用高效液相色谱建立左旋紫草素含量测定方法，采用L9（34）正交试验法优化紫草油的提取条件。 结果 选用紫草，加8倍菜籽油，温度140 ℃，加热0.5 h为最优提取工艺。 结论 优选的提取工艺合理、可行，质量可控。【Abstract】 Objective To optimize the preparation process of extracting arnebiae oil from Zibing suppository. Methods The optimum preparation process of extracting arnebiae oil was investigated by L9(34) orthogonal design as the shikonin content index. Results The optimum technical condition: added eight times rape oil and cooked for half an hour with the temperature of 140 ℃. Conclusion The optimized preparation procedure is feasible and the quality of the product can be controled.
Objective To investigate the performance of loading naringin composite scaffolds and its effects on repair of osteochondral defects. Methods The loading naringin and unloading naringin sustained release microspheres were prepared by W/O/W method; with the materials of the attpulgite and the collagen type I, the loading naringin, unloading naringin, and loading transforming growth factor β1 (TGF-β1) osteochondral composite scaffolds were constructed respectively by " 3 layers sandwich method”. The effect of sustained-release of loading naringin microspheres, the morphology of the composite scaffolds, and the biocompatibility were evaluated respectively by releasingin vitro, scanning electron microscope, and cell counting kit 8. Forty Japanese white rabbits were randomly divided into groups A, B, C, and D, 10 rabbits each group. After a osteochondral defect of 4.5 mm in diameter and 4 mm in depth was made in the intercondylar fossa of two femurs. Defect was not repaired in group A (blank control), and defect was repaired with unloading naringin composite scaffolds (negative control group), loading naringin composite scaffolds (experimental group), and loading TGF-β1 composite scaffolds (positive control group) in groups B, C, and D respectively. At 3 and 6 months after repair, the intercondylar fossa was harvested for the general, HE staining, and toluidine blue staining to observe the repair effect. Western blot was used to detect the expression of collagen type II in the new cartilage. Results Loading naringin microspheres had good effect of sustained-release; the osteochondral composite scaffolds had good porosity; the cell proliferation rate on loading naringin composite scaffold was increased significantly when compared with unloading naringin scaffold (P<0.05). General observation revealed that defect range of groups C and D was reduced significantly when compared with groups A and B at 3 months after repair; at 6 months after repair, defects of group C were covered by new cartilage, and new cartilage well integrated with the adjacent cartilage in group D. The results of histological staining revealed that defects were filled with a small amount of fibrous tissue in groups A and B, and a small amount of new cartilage in groups C and D at 3 months after repair; new cartilage of groups C and D was similar to normal cartilage, but defects were filled with a large amount of fibrous tissue in groups A and B at 6 months after repair. The expression of collagen type II in groups C and D was significantly higher than that in groups A and B (P<0.05), but no significant difference was found between groups C and D (P>0.05). Conclusion Loading naringin composite scaffolds have good biocompatibility and effect in repair of rabbit articular osteochondral defects.
To investigate the mechanism of cAMP/Ca2+ signaling pathway inducing bone marrow mesenchymal stem cells to differentiate into neuronal cells, we cultured the bone marrow mesenchymal stem cells D1 cells in the present study. D1 cells were divided into two groups: control group and salidroside inducing groups. Control group was cultured with complete culture solution D/F12, while salidroside inducing groups were induced with 100 mg·L–1 salidroside for different time periods (24, 48 and 72 hours). PCR-array assay was used to detect expression of 84 calcium related mRNA, and significantly different genes were chosen to analyse. As a result, there were 4 significantly upregulated mRNAs inclu-ding DNA damage-inducible transcript 3 (Ddit3), heat shock protein 5 (Hspa5), protein phosphatase 1 regulatory subunit (Ppp1r15a) and prostaglandin-endoperoxide synthase 2 (Ptgs-2), and 4 significantly downregulated mRNAs including glucagon (Gcg), interleukin 2 (Il2), tumor necrosis factor (Tnf) and somatostatin (Sst) in the cAMP/Ca2+ signaling pathway. They probably had an effect on the process of salidroside induced D1 cells differentiating into neuronal cells.
Objective To discuss the effectiveness of intramedullary nail fixation with selective cable wiring in the treatment of ipsilateral femoral neck fracture and subtrochanteric fracture. Methods Between June 2012 and December 2015, a total of 19 patients with ipsilateral femoral neck fracture and subtrochanteric fracture underwent closed reduction of femoral neck fracture and intramedullary nail fixation combined with selective cable wiring. There were 5 males and 14 females with a median age of 52 years (range, 35-77 years). The cause of injury included traffic accident injury in 17 cases and falling injury in 2 cases. According to Garden classification for femoral neck fractures, 7 cases were rated as type Ⅱ, 8 as type Ⅲ, and 4 as type Ⅳ. Femoral subtrochanteric fractures were classified by Seinsheimer classification, with 9 cases as type Ⅱ, 5 as type Ⅲ, 3 as type Ⅳ, and 2 as type V. The interval from injury to operation ranged from 2 to 7 days with an average of 3.7 days. Results The operation time was 58-125 minutes (mean, 82.4 minutes) and the intraoperative blood loss was 225-725 mL (mean, 289.5 mL). All incisions achieved healing by first intention and no early complication such as infection was observed. All patients were followed up 12-18 months (mean, 13.9 months). At 1 month after operation, the tip apex distance was 9-23 mm (mean, 15.2 mm). All patients achieved bone union with the healing time of 18-42 weeks (mean, 27.4 weeks). One case of hip varus and femoral neck re-displacement (femoral neck shaft angle was 122°) occurred at 3 months after operation, which achieved bone union at 42 weeks after operation. Five patients complained of postoperative pain with the visual analogue scale (VAS) score of 1-3 (mean, 1.8), which did not influence normal life. A total of 16 patients recovered preoperative hip function. During follow-up, no fracture nonunion, femoral head necrosis, implant failure, screw cut-out, and loosening of cable wiring was observed. The Harris hip score (HSS) was 72-92 (mean, 82.8) at last follow-up and 15 patients (78.9%) achieved good hip function. Conclusion Intramedullary nail fixation combined with selective cable wiring was effective in the treatment of ipsilateral femoral neck fracture and subtrochanteric fracture.
Objective To develop an anatomical locking plate in accordance with the anatomical characteristics of the sternoclavicular joint, which is reliable fixation and easy to operate, so as to provide an ideal internal fixation device for the treatment of sternoclavicular joint dislocation or peripheral fractures. Methods Gross measurement and CT measurement were performed on the 8 adult antiseptic and moist cadaver specimens (16 sides) to measure the parameters of surrounding bone structure of the sternoclavicular joint. The parameters included the thickness of presternum, sternal notch width, anteroposterior diameter of proximal 1/3 of clavicle, upper and lower diameters of proximal 1/3 of clavicle, angle between proximal end of clavicle and presternum in coronal plane, and angle of thoracoclavicular joint at anatomic position forward. According to the anatomical parameters and biomechanical properties of the specimens, the anatomical locking plate was designed and developed. The sternoclavicular ligament and joint capsule of all the specimens were completely cut off to make the sternoclavicular joint dislocation model. The left and right sternoclavicular joint of each specimen were randomly divided into experimental group (anatomic locking plate fixation) and control group (oblique T shape locking plate fixation). The sternoclavicular joint activity and common force mechanism was simulated on the universal mechanical testing machine, and the clavicular distal load test, sternoclavicular joint torsion test, and anti-pulling of steel plate manubrium part test were performed. Results The differences between the anatomical parameters of gross measurement and CT measurement were not significant (P>0.05). In the clavicular distal load test, when the anatomical position perpendicular to the distal clavicle back loading to 20 N, the displacement of loading point in the experimental group was (8.455±0.981) mm, which was significantly less than that in control group [(10.163±1.379) mm] (t=–3.012,P=0.020); the distal clavicle displacement of loading point of experimental group and control group were (5.427±1.154) mm and (6.393±1.040) mm, respectively, showing no significant difference (t=–1.459, P=0.188). In the sternoclavicular joint torsion test, the torque of experimental group was significantly greater than that of control group when the clockwise torsion angle was at 2, 4, 6, 8, and 10 degrees and the counterclockwise torsion angle was at 4, 6, 8, and 10 degrees (P<0.05). The torsional stiffness in the experimental group under clockwise and counterclockwise condition was 0.122 and 0.108 N·m/° respectively, which were significantly higher than those in the control group (0.083 and 0.078 N·m/° respectively) (F=67.824, P=0.000; F=20.992, P=0.002). In the anti-pulling of steel plate manubrium part test, the maximum pullout force of experimental group [(225.24±16.02) N] was significantly higher than that in control group [(174.40±21.90) N] (t=5.785, P=0.001). Conclusion The new type of anatomical locking plate can realize the sternoclavicular joint three-dimensional fixation, and has the advantages of reliable fixation, simple operation, less trauma, superior biomechanical properties, and earlier functional exercise. It may be an ideal internal fixation device in clinical treatment of sternoclavicular joint dislocation or peripheral fractures.