The incidence of primary malignant bone tumors is low, and clinical cognition is insufficient. The establishment of diagnostic criteria is of great significance for prognosis of tumors. National Comprehensive Cancer Network (NCCN) regularly publishes “Clinical Practice Guidelines for Bone Tumors” to summarize the latest treatment progress of bone tumors. In the latest version of the guidelines released in November 2020, surgery is the main treatment for chondrosarcoma, chordoma, and giant cell tumor of bone, which can be combined with radiotherapy or targeted therapy. Ewing’s sarcoma and osteosarcoma are treated by surgery combined with chemotherapy. Immunotherapy can be used to treat high-grade undifferentiated pleomorphic sarcoma. For recurrent tumors, surgery combined with radiotherapy, chemotherapy, and/or targeted therapy can be used for control. The guidelines provide a reference for the standard treatment of bone tumors.
Objective To investigate whether combining use of platelet-rich plasma (PRP) and decalcified bone matrix (DBM) has synergistic action on promoting bone consol idation and heal ing. Methods Forty male New Zealand rabbits (weighing 2.2-2.8 kg) were randomly divided into 4 groups (n=10). The whole blood was extracted from the central aural artery and PRP was prepared with the Landesberg’s method. An 1 cm-defect was made below the tibiofibular joint of the lefttibia through osteotomy. In group A, defect was repaired by distraction osteogenesis (1 cm); in group B, defect was repaired with 0.5 cm DBM and then by distraction osteogenesis (0.5 cm); in group C, defect was repaired by distraction osteogenesis (1 cm) and local injection of 1 mL PRP; in group D, defect was repaired by 0.5 cm DBM combined with 1 mL PRP and then by distraction osteogenesis (0.5 cm). Then lengthening started at 7 days after operation, at a rate of 1 mm/day and 0.5 mm every time for 10 days (groups A and C) or for 5 days (groups B and D). After the lengthening, the consolidation was performed. The X-ray films were taken at 0, 12, 17, 27, and 37 days after operation. At 37 days after operation, the tibial specimens were harvested for Micro-CT scanning, three-dimensional reconstruction and biomechanical test. Results The X-ray films showed that new bone formation in groups B and C was obviously better than that in groups A and D at 37 days. The bone mineral density (BMD), bone mineral content (BMC), and bone volume fraction (BVF) of groups B and C were significantly higher than those of groups A and D (P lt; 0.05); the BMD and BMC of group C were significantly higher than those of group B (P lt; 0.05); the BVF had no significant difference between groups B and C (P gt; 0.05). There was no significant difference in BMD, BMC, and BVF between groups A and D (P gt; 0.05). The trabecula number (Tb.N) of group C was significantly more than that of other groups (P lt; 0.05), and the trabecula spacing (Tb.Sp) of group C was significantly smaller than that of other groups (P lt; 0.05), but no significant differencewas found among other groups (P gt; 0.05). There was no significant difference in the trabecula thickness among 4 groups (P gt; 0.05). The ultimate angular displacement had no significant difference among 4 groups (P gt; 0.05). The maximum torque of groups B and C was significantly higher than that of groups A and D (P lt; 0.05); the maximum torque of group C was significantly higher than that of group B (P lt; 0.05); no significant difference was found between groups A and D (P gt; 0.05). Conclusion In the rabbit bone defect/lengthening model, local injection of PRP can enhance bone consol idation effectively during consol idation phase. In normal distraction rate, DBM can promote bone consol idation during distraction osteogenesis. In the early stage of distraction osteogenesis, combining use of DBM and PRP can not further promote bone consolidation and healing.
ObjectiveTo summarize the research progress of medial buttress plate assisted fixation for femoral neck fractures in young adults.MethodsThe literature about buttress plate assisted fixation for femoral neck fractures in young adults was widely reviewed and analyzed. The design principle, background, biomechanical characteristics, and clinical results of buttress plate were summarized.ResultsMedial buttress plate assisted fixation is the latest treatment of femoral neck fractures in young adults, which can convert the shear force at the fracture sides into compression force and promote fracture healing. Medial buttress plate can improve the biomechanical stability of femoral neck fractures and reduce the maximum stress of fixation implants. In clinical, the medial buttress plate can maintain fracture reduction, reduce the incidences of nonunion and surgical failure, and improve hip joint function.ConclusionMedial buttress plate assisted fixation can achieve good effectiveness for femoral neck fractures in young adults. However, due to the preliminary application, its indications, fixation implants, and long-term effectiveness need to be further studied and improved.
ObjectiveTo review and evaluate the research progress of the robot-assisted joint arthroplasty.MethodsThe domestic and foreign related research literature on robot-assisted joint arthroplasty was extensively consulted. The advantages, disadvantages, effectiveness, and future prospects were mainly reviewed and summarized.ResultsThe widely recognized advantages of robot-assisted joint arthroplasty are digital and intelligent preoperative planning, accurate intraoperative prosthesis implantation, and quantitative soft tissue balance, as well as good postoperative imaging prosthesis position and alignment. However, the advantages of effectiveness are still controversial. The main disadvantages of robot-assisted joint arthroplasty are the high price of the robot system, the prolonged operation time, and the increased radioactive damage of the imaging-dependent system.ConclusionCompared to traditional arthroplasty, robot-assisted joint arthroplasty can improve the accuracy of the prosthesis position and assist in the quantitative assessment of soft tissue tension, and the repeatability rate is high. In the future, further research is needed to evaluate the clinical function and survival rate of the prosthesis, as well as to optimize the robot system.
Objective To investigate the effect of growth differentiation factor 7 (GDF-7) on the tenogenic differentiation of bone marrow mesenchymal stem cells (BMSCs) in vitro, to provide evidence for improving the efficacy of BMSCs on tendon repair. Methods BMSCs were isolated from bone marrow tissue of green fluorescent protein rats by density gradient centrifugation method. Chondrogenic, osteogenic, and adipogenic differentiation assays were used to demonstrate the multi-differentiation potential of the BMSCs. BMSCs at passage 3 were cultured and divided into 4 groups according to different concentrations of GDF-7 (0, 12.5, 25.0, and 50.0 ng/mL): group A, B, C, and D, respectively. After cultured for 2 weeks in vitro, the mRNA expressions of scleraxis, tenomodulin, tenascin C, and collagen type I were detected by real-time fluorescent quantitative PCR method, the protein expressions of tenomodulin, tenascin C, and collagen type I by immunocytochemistry staining in 4 groups, and the protein expressions of tenomodulin by Western blot in groups A and C. Results BMSCs had osteogenic, chondrogenic, and adipogenic differentiation potentials. The mRNA expressions of tenomodulin in groups B, C, and D were 2.85, 3.41, and 3.07 times higher than that in group A, respectively; the mRNA expressions of scleraxis in groups B, C, and D were 2.13, 1.50, and 2.56 times higher than that in group A, respectively; and the mRNA expressions of tenascin C in groups B, C, and D were 2.45, 2.86, and 1.88 times higher than that in group A, respectively. There were significant differences between groups B, C, D and group A (P lt; 0.05), while there was no significant difference among groups B, C, and D (P gt; 0.05). The mRNA expressions of collagen type I in groups B and C were 1.92 and 2.45 times higher than that in group A, showing significant differences between groups B, C and group A (P lt; 0.05), but no significant difference between groups A and D (P gt; 0.05). Immunocytochemistry staining showed that the protein expressions of tenomodulin, tenascin C, and collagen type I were detected in groups B, C, and D but not in group A. The results were further confirmed by Western blot results which showed higher protein expression of tenomodulin in group C than in group A. Conclusion GDF-7 can be used to promote tenogenic differentiation of rat BMSCs in vitro.
ObjectiveTo investigate the effectiveness of total knee arthroplasty (TKA) with or without patellar resurfacing.MethodsBetween March 2013 and August 2015, 30 patients (60 knees) with osteoarthritis who met the inclusion criteria were recruited in the study. Of 30 cases, 24 were male and 6 were female with an average age of 57.2 years (range, 37-65 years). The body mass index ranged from 19.5 to 40.3 kg/m2 (mean, 28.2 kg/m2). According to Kellgren-Lawrence grading, there were 8 cases at grand Ⅲ and 22 cases at grand Ⅳ. All patients underwent primary bilateral TKA. The patellar resurfacing was done at the unilateral knee randomly (resurfacing side); the opposite treatment was done at the other side (non-resurfacing side). The indexes of 2 groups were recorded and compared, including the intraoperative blood loss, operation time, knee society score (KSS), " Forgotten Joint” scale (FJS), anterior knee pain, anterior patellar spirant, knee constraint feeling, anterior patellar clunk, muscle power of knee extension, and ability of up and down stairs, weight-bearing flexion, squatting down, cross-legged, knee down, knee extension, and patient satisfaction. Radiographic examination was used to analyze the prosthesis position.ResultsThe operation time were (126±14) minutes and (112±11) minutes in resurfacing side and non-resurfacing side, respectively, showing significant difference between two sides (t=5.103, P=0.030); and there was no significant difference in intraoperative blood loss between two sides (t=3.431, P=0.800). All patients were followed up 2-4 years (mean, 2.6 years). There was no significant difference (P>0.05) between two sides in KSS clinical and functional scores at preoperation and 6 weeks, 6 months, and 2 years after operation; in visual analogue scale (VAS) score of anterior knee pain at preoperation and 6 weeks after operation; in incidences of anterior patellar spirant, knee constraint feeling, anterior patellar clunk, and muscle power of knee extension at 6 weeks, 6 months, and 2 years after operation; in incidences of disability of up and down stairs, weight-bearing flexion, squatting down, cross-legged, knee down, and knee extension at 6 weeks, 6 months, and 2 years after operation; in ratio of FJS score at 2 years after operation. The VAS scores at 6 months and 2 years after operation in resurfacing group were significantly lower than those in non-resurfacing group (Z=–1.997,P=0.046; Z=–2.197,P=0.028). Patient satisfaction of resurfacing side was superior to the non-resurfacing side at 6 weeks after operation (χ2=4.271, P=0.039). Radiographic examination showed no prosthesis loosing occurred.ConclusionThe effectiveness of TKA with patellar resurfacing is better than that with non-resurfacing in patients satisfaction.
Objective To investigate the effect of accuracy of phase 3 Oxford prosthesis positioning on short-term effectiveness of unicompartmental knee arthroplasty (UKA). Methods The clinical data of 26 patients (26 knees) who were treated with UKA between September 2015 and November 2015 was retrospectively analyzed. The single-peg Oxford prosthesis was implanted in 15 patients (single-peg group), and twin-peg Oxford prosthesis was implanted in 11 patients (twin-peg group). There was no significant difference in gender, age, body mass index, Kellgren-Lawrence grading, and preoperative Hospital for Special Surgery (HSS) scores between 2 groups (P>0.05). HSS, knee society score (KSS), Western Ontario and McMaster University Osteoarthritis Index (WOMAC), and Oxford knee score (OKS) were used to evaluate the knee function. Radiographic criteria for Oxford UKA was used to evaluate the prosthesis position. The reason and treatment of bearing dislocations were recorded. Results All patients were followed up with mean follow-up time of 26.2 months in single-peg group (range, 24-27 months) and 25.2 months in twin-peg group (range, 24-26 months). The bearing dislocation occurred in 2 cases of twin-peg group during follow-up. At last follow-up, there was no significant difference in HSS, WOMAC, OKS, and KSS scores between 2 groups (P>0.05). There was no significant difference in radiographic scores of femoral component, tibial component, and overall components between 2 groups (P>0.05). No significant correlation was found between radiographic scores and postoperative functional outcome in 2 groups (P>0.05). Conclusion Within a safe range, the accuracy of phase 3 Oxford prosthesis positioning has limited influence on the short-term functional outcome.
ObjectiveTo investigate the three-dimensional structure of proximal femoral trabeculae, analyze the formation mechanism, and explore its relationship with the occurrence and treatment of proximal femoral fractures.MethodsSix cadaver adult femur specimens were harvested and the gross specimens containing both trabecular system and cortical bone were established by hand scraping. All samples were scanned by micro-CT and the CT images were input into Mimics18.0 software to establish the digital proximal femoral model containing trabecular structure. The spatial distribution of trabecular system was observed, and the relations between trabecular bone and the proximal femur surface and related anatomical landmarks were analyzed in digital models.ResultsThe gross specimen and digital models of trabecular system were successfully established. The trabecular system of proximal femur could be divided into two groups: the horizontal and vertical trabecular. The horizontal trabecular arose from the base of greater trochanter, gone along the direction of femoral neck, and terminated at the center of femoral head. The vertical trabecular began from the base of lesser trochanter and femoral calcar, gone radically upward, and reached the femoral head. The average distance of the horizontal trabecular to the greater trochanter was 22.66 mm (range, 17.3-26.8 mm). In the femoral head, the horizontal trabecula and the vertical trabecula were fused into a kind of sphere, and the distances from the horizontal trabecula to the surface of the femoral head vary in different sections. The average distance of trabecular ball to the femoral head surface was 6.88 mm (range, 6.3-7.2 mm) in sagittal plane, 6.32 mm (range, 5.8-7.6 mm) in coronal plane, and 6.30 mm (range, 5.6-6.3 mm) in cross section. The vertical and horizontal trabeculae intersect obliquely, and the average angle of horizontal trabecular and vertical one was 140.67° (range, 129-150°).ConclusionThe trabecular system exhibits a unique spatial configuration, which is the main internal support of proximal femur. Restoration of the integrity of trabecular structure is the important goal of proximal femoral fractures.
This study aims to analyze the biomechanical stability of Magic screw in the treatment of acetabular posterior column fractures by finite element analysis. A three-dimensional finite element model of the pelvis was established based on the computed tomography (CT) and magnetic resonance imaging (MRI) data of a volunteer and its effectiveness was verified. Then, the posterior column fracture model of the acetabulum was generated. The biomechanical stability of the four internal fixation models was compared. The 500 N force was applied to the upper surface of the sacrum to simulate human gravity. The maximum implant stresses of retrograde screw fixation, single-plate fixation, double-plate fixation and Magic screw fixation model in standing and sitting position were as follows: 114.10, 113.40 MPa; 58.93, 55.72 MPa; 58.76, 47.47 MPa; and 24.36, 27.50 MPa, respectively. The maximum stresses at the fracture end were as follows: 72.71, 70.51 MPa; 48.18, 22.80 MPa; 52.38, 27.14 MPa; and 34.05, 30.78 MPa, respectively. The fracture end displacement of the retrograde tension screw fixation model was the largest in both states, and the Magic screw had the smallest displacement variation in the standing state, but it was significantly higher than the two plate fixations in the sitting state. Magic screw can satisfy the biomechanical stability of posterior column fracture. Compared with traditional fixations, Magic screw has the advantages of more uniform stress distribution and less stress, and should be recommended.
Objective To analyze the characteristics of femoral neck fractures in young and middle-aged adults by means of medical image analysis and fracture mapping technology to provide reference for fracture treatment. Methods A clinical data of 159 young and middle-aged patients with femoral neck fractures who were admitted between December 2018 and July 2019 was analyzed. Among them, 99 patients were male and 60 were female. The age ranged from 18 to 60 years, with an average age of 47.9 years. There were 77 cases of left femoral neck fractures and 82 cases of right sides. Based on preoperative X-ray film and CT, the fracture morphology was observed and classified according to the Garden classification standard and Pauwels’ angle, respectively. Mimics19.0 software was used to reconstruct the three-dimensional models of femoral neck fracture, measure the angle between the fracture plane and the sagittal plane of the human body, and observe whether there was any defect at the fracture end and its position on the fracture surface. Through reconstruction, virtual reduction, and image overlay, the fracture map was established to observe the fracture line and distribution. Results According to Garden classification standard, there were 6 cases of type Ⅰ, 61 cases of type Ⅱ, 54 cases of type Ⅲ, and 38 cases of type Ⅳ. According to the Pauwels’ angle, there were 12 cases of abduction type, 78 cases of intermediate type, and 69 cases of adduction type. The angle between fracture plane and sagittal plane of the human body ranged from –39° to +30°. Most of them were Garden type Ⅱ, Ⅳ and Pauwels intermediate type. The fracture blocks were mainly in the form of a triangle with a long base and mainly distributed below the femoral head and neck junction area. Twenty-six cases (16.35%) were complicated with bone defects, which were mostly found in Garden type Ⅲ, Ⅳ, and Pauwels intermediate type, located at the back of femoral neck and mostly involved 2-4 quadrants. The fracture map showed that the fracture line of the femoral neck was distributed annularly along the femoral head and neck junction. The fracture line was dense above the femoral neck and scattered below, involving the femoral calcar. Conclusion The proportion of displaced fractures (Garden type Ⅲ, Ⅳ) and unstable fractures (Pauwels intermediate type, adduction type) is high in femoral neck fractures in young and middle-aged adults, and comminuted fractures and bone defects further increase the difficulty of treatment. In clinical practice, it is necessary to choose treatment plan according to fracture characteristics. Anatomic reduction and effective fixation are the primary principles for the treatment of femoral neck fracture in young and middle-aged adults.