Objective To review the progress in the cl inical treatment of Kienbouml;ck’s disease. Methods Related l iterature concerning the treatment of Kienbouml;ck’s disease was reviewed, and comprehensive analysis was done. Results The treatment methods of Kienbouml;ck’s disease include non-surgical treatment and surgical treatment, which are primarily guided bythe anatomic factor and Lichtman stage. Non-surgical treatment methods should be selected in patients of children and at stage I. Surgical treatment methods include vascularized bone graft transfer into the cored-out lunate, radial shortening osteotomy, radial lateral wedge osteotomy, etc. All surgical treatment methods have advantages and disadvantages. Conclusion For the treatment of Kienbouml;ck’s disease, none of procedure is superior to another. In short, choosing different treatment strategies based on different patients can achieve the desired outcome.
ObjectiveTo investigate the hotspots from researches on imaging of pancreatic neuroendocrine tumor in recent five years. MethodsThe bibliographies from research literatures on imaging of pancreatic neuroendocrine tumor from 2010 to 2015 in PubMed database were downloaded. The Bicomb 2.0 bibliographies analysis software was used to count high-frequency of Mesh major topics (MJMEs). SPSS 22.0 statistical software was applied for clustering analysis with MJMEs, then to get the topic hotspots. ResultsA total of 357 literatures were screened out during the years of 2010-2015. The MJMEs which frequency > 13 were 28. Taken the 28 MJMEs into clustering analysis, then three research hotspots were clustered. ConclusionResearches on imaging of the pancreatic neuroendocrine tumor in recent five years are mainly in terms of imaging techniques, a comparative study of pathology and endoscopic ultrasonography-fine needle aspiration, imaging and disease treatment.
Objective To review the research advances of the seed cells , the scaffolds and the tissue fabrication of tissue engineering bone. Methods The literature concerned culturing human bone marrow cells, reshaping cuttlebones, and fabricating bone tissues was reviewed extensively. Results Osteoblasts from human bone marrow were successfully induced and differentiated; the cuttlebones were reshaped in cuttlebone hydroxyapatite for the first time; and some tissue engineering bones, such as the osteoblasts/CHA500R, osteoblasts/cuttlebone hydroxyapatite and osteoblasts/PBH were fabricated. Conclusion These tissue einineering bones construced by marrow-derived osteoblasts and CHA500R, cuttlebone hydroxyapatite or PBH are hopeful to be applied clinically.
Avoidable mortality (AM) is an important indicator of health system performance. It is also an effective tool for evaluating the effectiveness of health measures and allocation of health resources. The concept development, analytical methods, and research contents of avoidable mortality are introduced in this study. This study investigated the applicability of avoidable mortality analysis in determining priority health-service intervention areas, determining priority health-service intervention populations and evaluating the quality of those services. This paper also discussed the significance and limitations of avoidable mortality analysis. The investigation provided references for further research and application of avoidable mortality analysis.
Objective To review the research progress of osteoblastextracellular matrix(ECM) and its application in bone tissue engineering. Methods The recentrelated literatures were extensively reviewed. Results The ECM was complex in its components. The configuration of cell and cell’s adhesion, migration, proliferation, and differentiation were subject to the ECM. The bioactivity of the tissue engineering products was revealed by ECM, which predicted the product’s efficiency in clinic application. Conclusion ECM has the potential to become the effective index in evaluating tissue engineered products.
Objective To review the study progress of mesenchymal stem cells induced to differentiate intervertebral disc cells Methods The recent related literature was reviewed. The theorical and experimental studies were summarized. Results MSCs had the potential of multidirectional differentiation.International experimental studies indicated the potential of MSCs induced to differentiate intervertebral disc cells. Conclusion MSCs induced to differentiate intervertebral disc cells has the fine prospect.
With the development of three-dimensional (3D) printing technology, more and more researches have focused on its application in the region of intervertebral fusion materials; the prospects are worth looking forward to. This article reviews the researches about 3D printing technology in spinal implants, and summarizes the materials and printing technology applied in the field of spinal interbody fusion, and the shortcomings in the current research and application. With the rapid development of 3D printing technology and new materials, more and more 3D printing spinal interbodies will be developed and used clinically.
Abstract: Objective To evaluate the biological characteristics of decellularized bovine jugular vein valved conduit treated with dyemediated photo oxidation. Methods From July 2009 to July 2010, this study was carried out in Xijing Hospital affiliated to the Fourth Military Medical University. Forty bovine jugular vein valved conduits were obtained from Qinchuan scalpers aged between 2 to 6 years with the weight ranged from 200 to 400 kg. Then, the 40 conduits were divided into four groups by random digital table with 10 in each group. The conduits were treated with glutaraldehyde in the glutaraldehyde group (GA group), were decellularized in the decellularized group (DC group), were decellularized and treated with dyemediated photo oxidation in the decellularized and dyemediated photo oxidation treated group (DP group) , and were not dealt with in the control group (CO group). Thickness, appearance, histology, water content, shrinkage temperature, breaking strength, and soluble protein level of the conduit wall and valve were detected and compared among the four groups. Results Thickness and water content of the conduit wall and valve in the DP group were similar to those in the CO group (Pgt;0.05), while thickness of both wall and valve in the DP group was less than those in the GA group (wall: 0.8±0.1 mm vs. 1.1±0.1 mm; valve: 02±0.1 mm vs. 0.3±0.1 mm, Plt;0.05), and water content of the conduit wall and valve in the DP group was more than those in the GA group (wall: 86.1%±2.2% vs. 70.4%±2.8%; valve: 87.1%±2.5% vs. 72.1%±3.1%, Plt;0.05). The breaking strength and shrinkage temperature of the DP group were similar to those of the GA group (Pgt;0.05), while the shrinkage temperature (wall: 84.7±1.4 ℃ vs. 70.4±0.3 ℃; valve: 85.7±1.5 ℃ vs. 70.7±0.6 ℃, Plt;0.05) and the breaking strength (wall: 10.4±1.1 N vs. 6.8±1.0 N; valve: 8.0±0.9 N vs. 3.2±0.6 N, Plt;0.05) of the DP group were higher than those in the CO group. Conclusion Decellularized bovine jugular vein valved conduits treated with dyemediated photo oxidation have nice biological characteristics.Key words: Dyemediated photo oxidation; Decellularized; Bovine jugular vein valved conduit; Biological characteristics
Objective To review researches of treatment of peripheral nerve injury with neuromuscular electrical stimulation (NMES) regarding mechanism, parameters, and cl inical appl ication at home and abroad. Methods The latest original l iterature concerning treatment of peri pheral nerve injury with NMES was extensively reviewed. Results NMES should be used under individual parameters and proper mode of stimulation at early stage of injury. It could promote nerve regeneration and prevent muscle atrophy. Conclusion NMES plays an important role in cl inical appl ication of treating peripheral nerve injury, and implantable stimulation will be the future.
ObjectiveTo explore the abilities of thesis writing of postgraduate medical freshpeople and their factors, and provide a basis for postgraduate education and course design of thesis writing.MethodsA designed questionnaire was administered to postgraduate medical freshpeople enrolled in West China Medical School of Sichuan University in 2020. The general characteristics, current status of skills or experiences related to thesis writing, and abilities including literature retrieval and reading, statistical analysis, diagramming, research paper writing, and journal selection and submission of the postgraduates were collected in September 2020. Logical regression was conducted to analyze the factors affecting the abilities of thesis writing.ResultsA total of 503 valid questionnaires were collected. Over one half of the graduate students (58.3%) were satisfied with the ability of literature retrieval and reading, with the highest score among the five abilities [median (lower quartile, upper quartile) was 3 (2, 3)]. Less than 20% of the students were satisfied with the remaining four abilities, with the lowest scores in the abilities of diagramming, research paper writing, and journal selection and submission [each median (lower quartile, upper quartile) was 1 (1, 2)]. Research experience and acknowledge of reporting guidelines were independent factors for all abilities related to thesis writing (P<0.05). Proficiency in statistical software was an independent factor for the abilities of data statistical analysis, diagramming, research paper writing, and journal selection and submission (P<0.05). Having published scientific paper was an independent factor for ability of journal selection and submission [odds ratio=4.695, 95% confidence interval (2.166, 10.180), P<0.001].ConclusionsThe postgraduate medical freshpeople of West China Medical School are not satisfied with the ability of statistical analysis, diagramming, paper writing, or journal selection and submission. Attention should be paid to research practice and learning of reporting guidelines, while statistical courses and diagramming courses should be set up expressly.