目的:探讨胸膜活检对胸腔积液病因诊断的价值。方法:对127例胸腔积液患者行首次胸膜活检术。结果:127例患者获取胸膜组织125例, 穿刺成功率98.4%,经病理检查有41例为正常胸膜组织,特异性病理诊断84例,病理诊断阳性率(67.2%)。恶性胸腔积液胸膜活检阳性38例(45.2%),结核性胸腔积液胸膜活检阳性31例(36.9%),非特异性炎15例(17.9%)。38例恶性肿瘤经免疫组织化学和特殊染色分类,腺癌27例,小细胞肺癌2例,鳞癌2例,恶性间皮瘤2例,转移癌3例,淋巴瘤1例,未分化癌1例。发生并发症者4例(3.1%),全部为气胸,肺压缩均小于15%,未做特殊处理数日后自行吸收。结论:胸膜活检是一项安全、简单、有效的胸膜疾病的重要的内科确诊手段。
ObjectiveTo compare the effectiveness of minimally invasive percutaneous internal fixation and traditional open reduction via Henry approach and internal fixation in the treatment of unstable distal radial fractures.MethodsFifty-six patients with unstable distal radial fractures that met the selection criteria between October 2013 and December 2014 were randomly divided into minimally invasive group (26 cases) and traditional group (30 cases). They were treated with oblique T-shaped locking plate internal fixation via minimally invasive percutaneous approach or traditional Henry approach. There was no significant difference in gender, age, side, causes of injury, fracture classification, and time from injury to operation between 2 groups (P>0.05). The length of incision, operation time, intraoperative blood loss, hospitalization time, and fracture healing time were recorded in 2 groups. The difference of the length of the radial styloid process, the volar tilting angle, and the ulnar inclining angle between at 3 months postoperatively and preoperation were compared between 2 groups. The visual analogue scale (VAS) score, the percentage of the lateral wrist flexion and extension range, forearm rotation, and the hand grip strength (recorded as FS%, FR%, and HG% , respectively) were compared between 2 groups at 4 weeks and 3 months postoperatively. The wrist function was evaluated through the disability of arm-shoulder-hand (DASH) scores at 3 months postoperatively.ResultsThe length of incision, operation time, intraoperative blood loss, and hospitalization time in minimally invasive group were significantly less than those in traditional group (P<0.05). The incisions of 2 groups were all achieved primary healing. All patients were followed up 10-16 months (mean, 12.6 months). There was no radial artery injury, screw too long, or screw entering the joint space. In minimally invasive group, 1 patient had the symptoms of median nerve irritation after operation, and recovered completely at 1 month; in traditional group, there were 2 cases of tendon irritation after operation. There was no significant difference in the fracture healing time, the difference of the length of the radial styloid process, the volar tilting angle, and the ulnar inclining angle between at 3 months postoperatively and preoperation between 2 groups (P>0.05). At 4 weeks after operation, the VAS score in minimally invasive group was significantly less than that in traditional group, and the FS%, FR%, and HG% were significantly higher than those in traditional group (P<0.05). There was no significant difference in above indicators between 2 groups at 3 months after operation (P>0.05). The DASH score in minimally invasive group was significantly less than that in traditional group at 3 months after operation (t=–5.308, P=0.000). The patient’s aesthetic evaluation of postoperative wound in minimally invasive group was better than in traditional group.ConclusionFor treatment of unstable distal radial fractures, the metacarpal minimally invasive internal fixation has the advantages of smaller wound, incisional concealment, and quicker recovery of wrist joint.
Objective To compare the effectiveness of suspension fixation plus hinged external fixator with double plate internal fixation in the treatment of type C humeral intercondylar fractures. Methods Between January 2014 and April 2016, 30 patients with type C (Association for the Study of Internal Fixation, AO/ASIF) humeral intercondylar fractures were treated. Kirschner wire suspension fixation plus hinged external fixator was used in 14 cases (group A), and double plate internal fixation in 16 cases (group B). There was no significant difference in gender, age, injury cause, disease duration, injury side, and type of fracture between 2 groups (P>0.05). Results There was no significant difference in operation time and hospitalization stay between 2 groups (P>0.05). But the intraoperative blood loss in group A was significantly less than that in group B (P<0.05); the visual analogue scale (VAS) score at 1 day and 3 days after operation in group A were significantly less than those in group B (P<0.05). Primary healing of incision was obtained in all patients of 2 groups, and no surgery-related complications occurred. The patients were followed up 6-24 months (mean, 12.3 months) in group A and 6-24 months (mean, 12.8 months) in group B. The self-evaluation satisfaction rate was 85.7% (12/14) in group A and was 81.2% (13/16) in group B at 3 months after operation, showing no significant difference (χ2=0.055, P=0.990). Based on the improved Gassebaum elbow performance score at 6 months after operation, excellent and good rate of the elbow function was 78.6% (excellent in 5 cases, good in 6 cases, fair in 2 cases, and poor in 1 case) in group A and was 81.2% (excellent in 6 cases, good in 7 cases, fair in 2 cases, and poor in 1 case) in group B, showing no significant difference between 2 groups (χ2=0.056, P=0.990). Heterotopic ossification occurred at 3 months after operation in 1 case of each group respectively. The X-ray films showed bony union in all cases; no loosening or breakage of screw was observed. The bone union time showed no significant difference between 2 groups (t=–0.028, P=0.978). The time of internal fixation removal, the intraoperative blood loss, and VAS score at 1 day and 3 days after operation in group A were significant better than those in group B (P<0.05). Conclusion The suspension fixation plus hinged external fixator and double plate internal fixation for the treatment of type C humeral intercondylar fractures have ideal outcome in elbow function. But the suspension fixation plus hinged external fixator is better than double plate internal fixation in intraoperative blood loss, postoperative VAS score, and time of internal fixation removal.
ObjectiveTo investigate the accuracy of progressive three-dimensional navigation template system (abbreviated as progressive template) to assist atlas-axial pedicle screw placement. MethodsThe clinical data of 33 patients with atlas-axial posterior internal fixation surgery between May 2015 and May 2017 were retrospectively analyzed. According to the different methods of auxiliary screw placement, the patients were divided into trial group (19 cases, screw placement assisted by progressive template) and control group (14 cases, screw placement assisted by single navigation template system, abbreviated as initial navigation template). There was no significant difference in gender, age, cause of injury, damage segments, damage types, and preoperative Frankel classification between the two groups (P>0.05). The operation time and intraoperative blood loss of the two groups were compared. The safety of screw placement was evaluated on postoperative CT by using the method from Kawaguchi et al, the deviation of screw insertion point were calculated, the angular deviation of the nailing on coordinate systems XOZ, XOY, YOZ were calculated according to Peng’s method. ResultsAll patients completed the operation successfully; the operation time and intraoperative blood loss in the trial group were significantly less than those in the control group (t=–2.360, P=0.022; t=–3.006, P=0.004). All patients were followed up 12–40 months (mean, 25.3 months). There was no significant vascular injury or nerve injury aggravation. Postoperative immediate X-ray film and CT showed the dislocation was corrected. Postoperative immediate CT showed that all 76 screws were of grade 0 in the trial group, and the safety of screw placement was 100%; 51 screws were of grade 0, 3 of gradeⅠ, and 2 of gradeⅡ in the control group, and the safety of screw placement was 91.1%; there was significant difference in safety of screw placement between the two groups (χ2=7.050, P=0.030). The screw insertion point deviation and angular deviation of the nailing on XOY and YOZ planes in the trial group were significantly less than those in the control group (P<0.05). There was no significant difference in angular deviation of the nailing on XOZ between the two groups (t=1.060, P=0.290). ConclusionCompared with the initial navigation template, the progressive navigation template assisting atlas-axial pedicle screw placement to treat atlas-axial fracture with dislocation, can reduce operation time and intraoperative blood loss, improve the safety of screw placement, and match the preoperative design more accurately.
ObjectiveTo evaluate the effectiveness of three-dimensional (3D) printing assisted internal fixation for unstable pelvic fractures.MethodsThe clinical data of 28 patients with unstable pelvic fractures admitted between March 2015 and December 2017 were retrospectively analyzed. The patients were divided into two groups according to different surgical methods. Eighteen cases in the control group were treated with traditional anterior and posterior open reduction and internal fixation with plate; 10 cases in the observation group were treated with 3D printing technology to make pelvic models and assist in shaping the subcutaneous steel plates of the anterior ring. Sacroiliac screw navigation template was designed and printed to assist posterior ring sacroiliac screw fixation. There was no significant difference between the two groups in gender composition, age, cause of injury, fracture type, and time interval from injury to surgery (P>0.05). The operation time, intraoperative blood loss, intraoperative fluoroscopy times, incision length, waiting time for weight-bearing exercise, and fracture healing time were recorded and compared between the two groups. Majeed score was used to evaluate the function at last follow-up. At immediate after operation, the reduction was evaluated according to Matta imaging scoring criteria, and the success of sacroiliac joint screw implantation in the observation group was evaluated. The deviation of screw entry point and direction between postoperative screws and preoperative simulated screws were compared in the observation group.ResultsAll the operation was successfully completed, and all patients were followed up 6-18 months (mean, 14.4 months). In the control group, 1 case had wound infection and 2 cases had deep vein thrombosis. No serious complication such as important blood vessels, and nerve injury and pulmonary embolism occurred in other patients in the two groups. No screw pulling out or steel plate breaking occurred. The operation time, intraoperative blood loss, fluoroscopy times, incision length, and waiting time for weight-bearing exercise of the control group were significantly more than those of the observation group (P<0.05); there was no significant difference in fracture healing time between the two groups (t=0.12, P=0.90). There was no significant difference in reduction quality between the two groups at immediate after operation (Z=–1.05, P=0.30); Majeed score of the observation group was significantly better than that of the control group at last follow-up (Z=–2.42, P=0.02). The success rate of sacroiliac joint screw implantation in the observation group reached category Ⅰ. In the observation group, the deviation angle of the direction of the screw path between the postoperative screw and the preoperative simulated screw implant was (0.09±0.22)°, and the deviation values of the entry points on the X, Y, and Z axes were (0.13±0.63), (0.14±0.58), (0.15±0.53) mm, respectively. There was no significant difference when compared with those before the operation (all values were 0) (P>0.05).ConclusionComputer design combined with 3D printing technology to make personalized pelvic model and navigation template applied to unstable pelvic fractures, is helpful to accurately place sacroiliac screw, reduce the operation time, intraoperative blood loss, and the fluoroscopy times, has good waiting time for weight-bearing exercise and function, and it is an optional surgical treatment for unstable fractures.
ObjectiveTo evaluate the feasibility and safety of three-dimensional (3D) printed drill guide template-assisted percutaneous pedicle screw fixation for multiple-level thoracolumbar fractures.MethodsClinical data of 19 patients with multilevel thoracolumbar fracture without nerve injury who underwent surgical treatment between May 2017 and January 2019 were retrospectively analyzed. There were 9 males and 10 females and their age ranged from 22 to 63 years, with an average age of 43.6 years. Injury cause included traffic accident injury in 12 cases, and fall from height injury in 7 cases. A total of 40 fractured vertebrae were involved in T10 to L3 levels. According to AO classification, there were 29 fractures of type A1, 9 fractures of type A2, and 2 fractures of type A3. According to TANG Sanyuan classification, multiple-segment thoracolumbar fractures were classified as 17 cases of type ⅠA, 1 case of type ⅠB, and 1 case of type ⅡC. The time from injury to operation was 2-6 days, with an average of 3.1 days. The 3D-printed universal drill guide template was used for assisting percutaneous pedicle screw fixation during operation. Intraoperative blood loss, average operation time and fluoroscopy frequency of each screw were recorded. Visual analogue scale (VAS) score was used to evaluate the improvement of low back pain before operation, at 3 days after operation, and at last follow-up. According to the CT at 3 days after operation, the Gertzbein and Robbins scales were used to evaluate the accuracy of screw insertion (the grade A and grade B were regarded as accuracy, the grade A was regarded as excellent of screw insertion). The Cobb angle in sagittal plane of the fracture segment was measured, and the percentage of anterior edge of injured vertebral height was calculated. The consistency of the inclination of bilateral pedicle screws were analyzed postoperatively, and compared the angle of the intraoperative guide plate with the inclination of screw to verify the effectiveness of the guide plate in controlling the inclination.ResultsAll the 19 patients completed the operation successfully, and the intraoperative blood loss was 44-67 mL, with an average of 54.3 mL. The average operation time for each screw insertion was 7.3-11.1 minutes, with an average of 9.6 minutes. The average fluoroscopy frequency of each screw insertion was 1.6-2.5 times, with an average of 2.0 times. No spinal cord, nerve root injury, infection, and other complications occurred. All patients were followed up 24-38 months, with an average of 28.7 months. The accuracy of pedicle screws was evaluated by using Gertzbein and Robbins scales: 145 screws were grade A and 11 screws were grade B. The accuracy of screw insertion was 100% and the excellent rate was 92.9%. The CT data at 3 days after operation showed no significant difference in the inclination between the left and right screws in the same vertebral body (t=0.93, P=0.36). There was no significant difference between the angle of guide plate and the screw inclination (P>0.05). The VAS score, Cobb angle in sagittal plane, and the percentage of anterior edge of injured vertebral height were significantly improved at 3 days after operation and at last follow-up, and the VAS score was declined at last follow-up compared with 3 days after operation, all showing significant differences (P<0.05). There was no significant difference in the sagittal Cobb angle and the percentage of anterior edge of injured vertebral height between two postoperative time points (P>0.05). At last follow-up, no internal fixators were loosened or broken, and all fractures healed well.ConclusionFor the multiple-level thoracolumbar fractures, 3D-printed drill guide template assisting percutaneous pedicle screw fixation can reduce the operation time, intraoperative blood loss, and fluoroscopy frequency and the screw insertion is accurate and has a good reduction effect.
Objective To evaluate the deviation between actual and simulated screw placement after cervical pedicle screw placement assisted by 3D printed navigation template, and analyze the correlation between screw placement deviation and navigation pipe length. Methods A total of 40 patients undergoing cervical 1-7 pedicle screw insertion assisted by 3D printed navigation template in Zigong Fourth People’s Hospital between February 2018 and August 2020 were included in this prospective study. These patients were divided into 3 groups randomly, including 12 patients with a 5-mm pipe length (5 mm group), 13 patients with a 10-mm pipe length (10 mm group), and 15 patients with a 15-mm pipe length (15 mm group). Three-dimensional modeling was performed on preoperative cervical CT images of these patients and simulated pedicle screw was placed. Individualized pedicle screw navigation templates were designed according to the position and direction of simulated pedicle screws, and 3D printing was performed on the cervical model and navigation templates. Preoperative 3D printed model and navigation templates were used to simulate the surgical process to confirm the safety of screws. During the operation, pedicle screw placement was performed according to the preoperative design and simulated surgical process. The postoperative CT images were registered with the preoperative CT images in 3D model. The safety of screw placement was evaluated by the postoperative screw placement Grade, and the accuracy of screw placement was evaluated by measuring the deviation of screw placement point and the deviation of screw placement direction in horizontal plane (inclination angle) and sagittal plane (head inclination angle). The influence of different navigation pipe lengths on the safety and accuracy of screw placement was analyzed. Results A total of 164 pedicle screws were inserted with navigation template assistance, including 48 screws (38 in Grade 0 and 10 in Grade 1) in the 5 mm group, 52 screws in the 10 mm group (all in Grade 0), and 64 screws (52 in Grade 0 and 12 in Grade 1) in the 15 mm group, and the difference in the grade among the three groups was statistically significant (P<0.05). When the navigation pipe length was 5, 10, and 15 mm, respectively, the screw entry point deviation was (1.87±0.63), (1.44±0.63), and (1.66±0.54) mm, respectively, the inclination angle deviation was (2.72±0.25), (0.90±0.21), and (1.84±0.35)°, respectively, and the head inclination angle deviation was (8.63±1.83), (7.15±1.38), and (8.24±1.52)°, respectively. The deviations in the 10 mm group were all significantly less than those in the other two groups (P<0.05). Conclusions In the cervical pedicle screw placement assisted by navigation template, all the screws were Grade 0 or Grade 1, with high safety. The mean deviation of the screw entry point is within 2 mm, with high accuracy. When the length of navigation pipe is 10 mm, the safety and accuracy of screw placement can be fully guaranteed.
Objective To evaluate the effectiveness of spinal canal decompression assisted by unilateral biportal endoscopy (UBE) and percutaneous uniplanar pedicle screw internal fixation in the treatment of lumbar burst fractures with neurological symptoms. Methods Between June 2021 and December 2022, 10 patients with single level lumbar burst fracture with neurological symptoms were treated with spinal canal decompression assisted by UBE and percutaneous uniplanar pedicle screw internal fixation. There were 7 males and 3 females with an average age of 43.1 years (range, 21-57 years). The injured vertebrae located at L1 in 2 cases, L2 in 4 cases, L3 in 3 cases, and L4 in 1 case. There were 7 cases of AO type A3 fractures and 3 cases of AO type A4 fractures. The total operation time, the time of operation under endoscopy, and complications were recorded. Pre- and post-operative visual analogue scale (VAS) score and American Spinal Injury Association (ASIA) scale (grading A-E corresponding to assigning 1-5 points for statistical analysis) were used to evaluate effectiveness. X-ray film and CT were performed to observe the fracture healing, and the ratio of anterior vertebral body height, Cobb angle, and rate of spinal canal invasion were measured to evaluate the reduction of fracture.Results All operations was successfully completed, and the spinal canal decompression and the bone fragment in spinal canal reduction completed under the endoscopy. Total operation time was 119 minutes on average (range, 95-150 minutes), and the time of operation under endoscopy was 46 minutes on average (range, 35-55 minutes). There was no complication such as dural sac, nerve root, or blood vessel injury during operation. All incisions healed by first intention. All patients were followed up 18.7 months on average (range, 10-28 months). The VAS score after operation significantly decreased when compared with that before operation (P<0.05), and further improved at last follow-up (P<0.05). The ASIA scale after operation significantly improved when compared with that before operation (P<0.05), and there was no significant difference (P>0.05) in the ASIA scale between at 1 week after operation and at last follow-up. The imaging examination showed that the screw position was good and the articular process joint was preserved. During follow-up, there was no loosening, fracture, or fixation failure of the internal fixation. The ratio of anterior vertebral body height and Cobb angle significantly improved, the rate of spinal canal invasion significantly decreased after operation (P<0.05), and without significant loss of correction during the follow-up (P>0.05). Conclusion Spinal canal decompression assisted by UBE and percutaneous uniplanar pedicle screw fixation is a feasible minimally invasive treatment for lumbar burst fractures with neurological symptoms, which can effectively restore the vertebral body sequence, as well as relieve the compression of spinal canal, and improve the neurological function.
Objective To compare the clinical results of locking compress plate (LCP) as an external fixator and standard external fixator for treatment of tibial open fractures. Methods Between May 2009 and June 2012, 59 patients with tibial open fractures were treated with LCP as an external fixator in 36 patients (group A), and with standard external fixator in 23 patients (group B). There was no significant difference in gender, age, cause of injury, affected side, type of fracture, location, and interval between injury and surgery between 2 groups (P gt; 0.05). The time of fracture healing and incision healing, the time of partial weight-bearing, the range of motion (ROM) of knee and ankle, and complications were compared between 2 groups. Results The incidence of pin-track infection in group A (0) was significantly lower than that in group B (21.7%) (P=0.007). No significant difference was found in the incidence of superficial infection and deep infection of incision, and the time of incision healing between 2 groups (P gt; 0.05). Deep vein thrombosis occurred in 5 cases of group A and 2 cases of group B, showing no significant difference (χ2=0.036, P=0.085). All patients were followed up 15.2 months on average (range, 9-28 months) in group A, and 18.6 months on average (range, 9-47 months) in group B. The malunion rate and nonunion rate showed no significant difference between groups A and B (0 vs. 13.0% and 0 vs. 8.7%, P gt; 0.05); the delayed union rate of group A (2.8%) was significantly lower than that of group B (21.7%) (χ2=5.573, P=0.018). Group A had shorter time of fracture healing, quicker partial weight-bearing, greater ROM of the knee and ankle than group B (P lt; 0.05). Conclusion The LCP external fixator can obtain reliable fixation in treating tibial open fracture, and has good patients’ compliance, so it is helpful to do functional exercise, improve fracture healing and function recovery, and reduce the complication incidence.
【摘要】 目的 从法医病理学角度分析引起医疗纠纷的孕产妇死亡原因、医疗纠纷发生原因并提出相关防范措施。 方法 对1999年1月-2008年12月间46例引起医疗纠纷的孕产妇死亡案例进行回顾性分析。 结果 孕产妇死亡年龄以30岁以上多见，死亡时妊娠时间以围产期居多（87.0%）。死亡原因中产科失血性休克死亡21例（45.7%），栓塞类疾病死亡8例（17.4%），感染性疾病死亡5例（10.8%），其他原因死亡12例（26.1%）。46例中属非医疗过失性医疗纠纷8例（17.4%），医疗过失性纠纷38例（82.6%），医疗过失的原因主要为抢救不及时、处理不当、误诊误治等。涉及纠纷的医院以县区级医院居多（54.3%）。 结论 通过法医病理学司法鉴定查明死亡原因，明确医疗责任及医疗纠纷原因，已成为解决孕产妇死亡医疗纠纷的重要手段。【Abstract】 Objective To analyze the causes of maternal death with medical disputes, the causes of medical disputes, and to recommend the related preventions through a forensic pathological angle. Methods We retrospectively analyzed 46 cases of maternal death with medical disputes which were collected by West China Center of Forensic Medicine Service in Sichuan between January 1999 and December 2008. Results Most maternal deaths occurred over 30 years old. They most frequently happened during the peri-natal period (87.0%). The causes of death included obstetric hemorrhagic shock in 21 cases (45.7%), embolism-like diseases in 8 cases (17.4%), infectious diseases in 5 cases (10.8%) and other reasons in 12 cases (26.1%). Among all the 46 cases of medical disputes, 8 (17.4%) were not due to medical malpractices, while the other 38 cases (82.6%) had something to do with such medical malpractices as delayed or inappropriate treatment, misdiagnosis and so on. Most of the malpractices in these cases involved medical institutions at a county level (54.3%). Conclusion Forensic judicatory appraisal is important to resolve medical disputes of maternal death by finding out the cause of death, clarifying the medical responsibility and clearing the cause of medical disputes.