Objective To compare the bone resorption between the proximal fixation of the anatomique benoist giraud（ABG） hip and the distal fixation of the anatomic medullary locking（AML） hip by the medium-term X-ray films, and to evaluate the clinical results of the two prostheses. Methods From January 1992 to December 1996, 298 patients (396 hips) underwent the total hip arthroplasty at Wilson Hospital in Korea. In 125 patients, 176 hips were ABG hips, including 103 avascularnecrosis hips, 57 dysplasia hips, and 16 other diseased hips; In the other 173 patient the remaining 220 hips were AML hips, including 147 avascular necrosis hips, 65 dysplasia hips, and 8 other diseased hips. The A-P X-ray imagings were followed up for 5-12 years averaged 8 years, and were compared with the immediate postoperative X-ray imagings. The bone resorption area was measured and the bone resorption cases were recorded according to the Gruen zone obsesvation. Results During operation, 2 ABG hips and 5 AML hips were cracked at the femoral diaphysis; 3 ABG hips and 1 AML hip were cracked at the metaphysis; 6 ABGhips and 3 AML hips were fractured because of trauma after operation; among them, 2 ABG hips needed the stem revision and the remaining hips underwent the openreduction and the internal fixation. During the follow-up, 9 ABG hips were revised, 7 hips of which developed the aseptic loosening. No AML hip was revised, but 3 AML hips developed the aseptic loosening. The bone resorption pattern in theABG and AML hips was similar. The bone resorption occurred most commonly in theGruen zones 1 and 7, and it extended from the metaphysis to the diaphysis. In the Guren zones 2, 5, 6 and 7, there were more AML hips than ABG hips that developed the bone resorption. The bone resorption area around the AML hip was larger than that around the ABG hip. Conclusion The stress shielding bone resorption usually occurs proximally to the union area of the bone and the prosthesis. The ABG prosthesis is a proximal fixation prosthesis, therefore, the stress shielding bone resorption can be reduced. The bone resorption around the AML prosthesis develops slowly within 10 years after operation. The stress shielding bone resoption may reach the summit within 10 years and it will not develop endlessly, so the prosthesis will be stable for a long time. The probabilityof the bone resorption in the ABG prosthesis is smaller than that in the AMLprosthesis. The bone resorption around the AML prosthesis may develop slowly after 10 years and will not affect the stability of the prosthesis for a long time.
Objective To verify the effect of palatoplasty with or without velopharyngeal muscular reconstruction on the velar movement through the lateral radiography. Methods From October 1988 to October 2000, 62 patients with cleft palate and velopharyngeal insufficiency were treated. Of them, 32 were repaired by velopharyngeal muscular reconstruction (group A) and 30 by modified von Langenbeck’s procedure (group B). The lateral radiographs and cephalometric analysis were taken. The velopharyngeal closure, velar extensibility, the angle changes of velar elevation, the distance changes of velar levator eminence based on anatomy (LEA) to velopharyngeal closure line (VCL), the varieties in LEA, the comparison of LEA and velar levator eminence based on phonation (LEP), the distance comparison between posterior nasal spine (PNS) to LEA and LEP through soft palate line (SPL) were measured. Results During the phonation, group A was significantly greater than group B in the velopharyngeal closure rate(Plt;0.01)， the velar extensibility(Plt;0.05) and the location comparison between LEA and LEP(Plt;0.01); group B was significantly greater than group A in velar elevation angle (Plt;0.05), the varieties in LEA(Plt;0.05). In velar rest position, the distance of LEA to VCL was greater inB group than in A group(Plt;0.01). There was significant difference in thedistance comparison between LEA and LEP(Plt;0.05), difference between LEA and LEP(Plt;0.01) and the distance PNS-SPL-LEA and PNSSPL-LEP(Plt;0.05) within group B; contrary to the results within group A(P＞0.05). Conclusion The velopharyngeal muscular reconstruction in palatoplasty can result in a near normalizationof anatomic measurement of velar levator muscles and improve the velar functionand velopharyngeal competence. Repositioning of velar muscles in a more anatomic correct, transverse position is more important to improve the velar length andaccordant velar movement with velopharyngeal muscles in functional palatoplasty. The velar angle change and velar elevation during phonation are not determinative factors for velopharyngeal competence.
This paper presents a unit free-form deformation (FFD) method applied to rapid three-dimensioanl (3D) bone reconstruction, which was based on traditional FFD. With the femur as an example, we reconstructed a 3D model of femur from two X-ray images and a standardized model by taking advantage of unit FFD algorithm. The X-ray images and its parameters were taken by C-arm device. Those parameters and X-ray contour are contributed to 3D reconstruction. The out contours of X-ray image and standard model were connected by point matching algorithm. The unit-FFD lattice was built to reconstruct standard model and finally made the contour of X-ray image and standard model exactly the same. Experiments on shape accuracy, robustness and time consuming, carried out by 35 specimen from cadaver, showed that mean error of shape (0.52 mm) and mean construction time (112 s) were lower than those using traditional method (0.7-2.6 mm, 8-20 min). The method proposed in this paper shows a good prospect in clinical application and related research.
Objective To investigate the relationship between hallux valgus and the indicators associated with medial cuneiform obliquity measured on feet weight-bearing anteroposterior X-ray films. Methods Based on the feet weight-bearing anteroposterior X-ray films taken between January 2018 and February 2021 and met the criteria, the hallux valgus angle (HVA), intermetatarsal angle (IMA), metatarsus adductus angle (MAA), metatarsus cuneiform angle (MCA), distal medial cuneiform angle (DMCA), and proximal metatarsal articular angle (PMAA) were measured and the morphology of the first tarsometatarsal (TMT) were recorded. According to the HVA, the X-ray films were divided into normal group (HVA<15°) and hallux valgus group (HVA≥15°). The gender, age, sides, IMA, MAA, MCA, DMCA, PMAA, and the morphology of TMT were compared between groups. The influencing factors of HVA and IMA were analyzed by multivariate linear regression analysis. Results X-ray films of 534 patients (679 feet) met the selection criteria and were included in the study. There were 220 males and 314 females, with an average age of 36 years (mean, 18-82 years). There were 154 cases (168 feet) in the normal group and 403 cases (511 feet) in the hallux valgus group. There were significant differences in gender and age between groups (P<0.05), and no significant difference in the side (P>0.05). The IMA, MAA, and MCA in the hallux valgus group were significantly bigger than those in the normal group (P<0.05); the difference in DMCA between the two groups was not significant (P>0.05). The TMT morphology of the two groups was mainly curved, and the difference in morphology classification was not significant (P>0.05). PMAA measurement showed that there were 3 kinds of metatarsal shapes: adductive metatarsal, neutral metatarsal, and abductive metatarsal, the difference in metatarsal shapes between groups was not significant (P>0.05). The PMAA of abductive metatarsal was significantly bigger in normal group than in hallux valgus group (P<0.05), there was no significant difference in PMAA of adductive metatarsal between groups (P>0.05). Multivariate linear regression analysis showed that age, MCA, and DMCA were the influencing factors of HVA (P<0.05), and age, MAA, MCA, and DMCA were the influencing factors of IMA (P<0.05). Conclusion The medial cuneiform obliquity is relatively constant and the DMCA can not be used as the characteristic angle to quantify hallux valgus. The morphology of TMT has no relationship with hallux valgus, while MAA, MCA, and PMAA are all factors to be considered, and MCA can be used as the characteristic angle to quantify hallux valgus.
Precise segmentation of lung field is a crucial step in chest radiographic computer-aided diagnosis system. With the development of deep learning, fully convolutional network based models for lung field segmentation have achieved great effect but are poor at accurate identification of the boundary and preserving lung field consistency. To solve this problem, this paper proposed a lung segmentation algorithm based on non-local attention and multi-task learning. Firstly, an encoder-decoder convolutional network based on residual connection was used to extract multi-scale context and predict the boundary of lung. Secondly, a non-local attention mechanism to capture the long-range dependencies between pixels in the boundary regions and global context was proposed to enrich feature of inconsistent region. Thirdly, a multi-task learning to predict lung field based on the enriched feature was conducted. Finally, experiments to evaluate this algorithm were performed on JSRT and Montgomery dataset. The maximum improvement of Dice coefficient and accuracy were 1.99% and 2.27%, respectively, comparing with other representative algorithms. Results show that by enhancing the attention of boundary, this algorithm can improve the accuracy and reduce false segmentation.
Objective To explore the method of accurately estimating the acetabular cup prosthesis coverage rate (hereinafter referred to as “cup coverage rate”) in total hip arthroplasty (THA) based on X-ray films, and to determine the effective parameters that can be used to estimate the cup coverage rate. MethodsThe three-dimensional printed pelvic models were established based on CT data of 16 healthy pelvis, and the acetabular prosthesis were implanted according to conventional THA procedure. The length and width of the uncovered area of the acetabular cup prosthesis were measured by a modified X-ray recording method with a rotating C-arm X-ray machine, and the cup coverage rate was calculated. Then the differences among the traditional anteroposterior X-ray recording method, the modified method, and actual measurement on pelvic model were statistically analyzed. The correlation between the area of the uncovered area of the prosthesis and its width and length was analyzed by using multiple linear regression analysis. Results The cup coverage rates of traditional method, modified method, and actual measurement were 78.22%±3.36%, 86.74%±3.61%, and 89.62%±2.62%, respectively, with significant differences (P<0.05). The results of multiple linear regression analysis showed that the width and length were positively linear with the uncovered area of the prosthesis, and the regression equation was as follows: uncovered area of the prosthesis=−21.192+0.248×width+0.140×length, and the coefficient of determination R2=0.857, P<0.001. Conclusion Compared with the traditional method, the modified method can more accurately evaluate the cup coverage rate during THA, and the width of the uncovered area of the prosthesis can be used as an effective reference for the cup coverage rate.