Objective To study the feasibil ity and rel iabil ity of the multi-plannar reformation (MPR) of multispiral CT (MSCT) in measuring the kyphosis angle (KA) after thoracolumbar fracture. Methods From December 2007 to December 2009, 45 thoracolumbar fracture patients who underwent computed radiology (CR) and MSCT were recruited. There were 32 males and 13 females with a mean age of 48 years (range, 24-63 years), including 36 simple compression fractures and 9 burst fractures. The fracture locations were T11 in 6 cases , T12 in 11 cases, L1 in 20 cases, and L2 in 8 cases. Fracture was caused by trafffic accident in 25 cases, by fall ing from height in 12 cases, and by others in 8 cases. The imaging examination was performed after 2 hours to 7 days of injury in 22 cases and after more than 7 days in 23 cases. The KA was measured on the lateral X-ray films of CR and MPR by two observers, then the measurements were done again after three weeks. The data were statistically analyzed. Results The average KA values on CR by two observers were (20.75 ± 8.31)° and (22.49 ± 9.07)°, respectively; showing significant difference (P lt; 0.05), and the correlation was good (r=0.882, P lt; 0.05). The average KA values on MPR by two observers were (16.65 ± 8.62)° and (17.08 ± 7.88)°, respectively, showing no significant difference (P gt; 0.05), the correlation was excellent (r=0.976, P lt; 0.05). The average KA values on CR and MPR were (21.61 ± 8.43)° and (16.87 ± 8.20)°, respectively; showing significant difference (P lt; 0.05), the correlation was good (r=0.852, P lt; 0.05). Conclusion It is more feasible and rel iable in measuring the KA on MRP of MSCT than CR, but the value is larger on CR.
To study project of simpl icity and util ity for screw-plate system by pedicle of atlanto-axis mani pulatively hand by X-ray film and CT to prove the one success rate of putting screws. Methods Formulate personal program was used in operation by image save transmission of X-ray film and CT during January 2002 and September 2006 in 31 patients. There were 18 males and 13 femals, aged from 23 to 61 years old with an average age of 43.5 years. Putting screw points bypedicle of atlas were measured: left (19.93 ± 1.32) mm, right (19.16 ± 1.30) mm; putting screw obl iquity angle to inside by pedicle of atlas: left (23.72 ± 2.09)°, right (23.35 ± 1.91)°; putting screw obl iquity angle to side of head by pedicle of atlas: (9.00 ± 1.20)°. Screw points by pedicle of axis: left (13.14 ± 0.82) mm right (13.85 ± 0.79) mm; putting screw obl iquity angle to inside by pedicle of axis: left (24.52 ± 1.26)°, right (20.42 ± 1.42)°; putting screw obl iquity angle to side of head by pedicle of axis: (25.00 ± 3.00)°. The domestic location toward speculum was employed in operation and putting screw points and angles were formulated by X-CT program. The pedicle screws of suitable diameter and length were of exception and screws into pedicle of atlanto-axis were put by hand. Results Pain of the greater occipital nerve occurred in 2 patients after operation and was fully recovered by treatment 1 month after operation. The lateral cortical bone of pedicle was cut by 2 screws, but the spinal cord and vertebral artery were fine. The atlas and the fracture of odontoid process of axis were completely replaced in X-ray films of all patients 1 day after operation.The position relation of lag screw and vertebral artery or spinal cord was very good in CT sheets. All cases were followed up with an average of 10.5 months during 9 months to 5 years and 4 months, and obtained atlantoaxial arthrodesis. The breakage of screw and plate was not found in all cases. According to JOA score standard, 16 cases were excellent, 12 were good, 2 were fair, 1 was poor, and the excellent and good rate was 90.32% . Conclusion The personal design and cl inical appl ication of X-ray films and CT sheets are of great significance to screw-plate system by pedicle of atlanto-axis because of simpl ification of designs and methods and better personal ity.
ObjectiveTo discuss the feasibility and accuracy of distal femoral patient-specific cutting guide in total knee arthroplasty (TKA) based on knee CT and full-length X-ray film of lower extremities. MethodsBetween July 2016 and February 2017, 20 patients with severe knee joint osteoarthritis planned to undergo primary TKA were selected as the research object. There were 9 males and 11 females; aged 53-84 years, with an average of 69.4 years. The body mass index was 22.1-31.0 kg/m2, with an average of 24.8 kg/m2. The preoperative range of motion (ROM) of the knee joint was (103.0±19.4)°, the pain visual analogue scale (VAS) score was 5.4±1.3, and the American Hospital of Special Surgery (HSS) score was 58.1±11.3. Before operation, a three-dimensional model of the knee joint was constructed based on the full-length X-ray film of lower extremities and CT of the knee joint. The distal femoral patient-specific cutting guide was designed and fabricated, and the thickness of the distal femoral osteotomy was determined by digital simulation. The thickness of the internal and external condyle of the distal femur osteotomy before operation and the actual thickness of the intraoperative osteotomy were compared. The intraoperative blood loss, postoperative drainage loss, and hidden blood loss were recorded. The ROM of knee joint, VAS score, and HSS score at 3 months after operation were recorded to evaluate effectiveness. The position of the coronal and sagittal plane of the distal femoral prosthesis were assessed by comparing the femoral mechanical-anatomical angle (FMAA), anatomical lateral distal femoral angle (aLDFA), mechanical femoral tibial angle (mFTA), distal femoral flexion angle (DFFA), femoral prosthesis flexion angle (FPFA), anatomical lateral femoral component angle (aLFC), and the angle of the femoral component and femoral shaft (α angle) between pre- and post-operation.ResultsTKA was successfully completed with the aid of the distal femoral patient-specific cutting guide. There was no significant difference between the thickness of the internal and lateral condyle of the distal femur osteotomy before operation and the actual thickness of the intraoperative osteotomy (P>0.05). All patients were followed up 3 months. All incisions healed by first intention, and there was no complications such as periarticular infection and deep vein thrombosis. Except for 1 patient who was not treated with tranexamic acid, the intraoperative blood loss of the rest 19 patients ranged from 30 to 150 mL, with an average of 73.2 mL; the postoperative drainage loss ranged from 20 to 500 mL, with an average of 154.5 mL; and the hidden blood loss ranged from 169.2 to 1 400.0 mL, with an average of 643.8 mL. At 3 months after operation, the ROM of the knee was (111.5±11.5)°, and there was no significant difference when compared with the preoperative one (t=–1.962, P=0.065). The VAS score was 2.4±0.9 and HSS score was 88.2±7.5, showing significant differences when compared with the preoperative ones (t=7.248, P=0.000; t=–11.442, P=0.000). Compared with the preoperative measurements, there was a significant difference in mFTA (P<0.05), and there was no significant difference in aLDFA, FMAA, or DFFA; compared with the preoperative plan, there was no significant difference in FPFA, aLFC, or α angle (P>0.05). ConclusionThe use of distal femoral patient-specific cutting guide based on knee CT and full-length X-ray film of lower extremity can achieve precise osteotomy, improve coronal and sagittal limb alignment, reduce intraoperative blood loss, and obtain satisfactory short-term effectiveness.
Objective To analyze the correlation between the morphology of tibial intercondylar eminence and non-contact anterior cruciate ligament (ACL) injury, and provide a theoretical basis for the prevention and risk identification of ACL injury. Methods A retrospective analysis was conducted on the knee radiographs of 401 patients admitted to the Chengdu Second People’s Hospital between January 2017 and October 2021, including 219 males and 182 females. Non-contact rupture of ACL was observed in 180 patients and confirmed by arthroscopy or surgery, while the remained 221 patients were confirmed to have normal ACL by physical examination and MRI. The heights of medial and lateral tibial intercondylar eminence and the width of tibial intercondylar eminence of the 401 patients were measured, and the risk factors of ACL injury were analyzed. Results The height of medial tibial intercondylar eminence was lower and the width of tibial intercondylar eminence was smaller in male patients with ACL fracture than those in the male control group with statistical significance (P<0.05). Logistic regression analysis showed that a narrow width of tibial intercondylar eminence was a risk factor of ACL injury in males (P<0.05). The receiver operating characteristic (ROC) curve showed that the diagnostic threshold was 11.40 mm, the area under the curve (AUC) was 0.851 [95% confidence interval (CI) (0.797, 0.896)], the sensitivity was 72.81%, and the specificity was 84.76%. The height of medial tibial intercondylar eminence was lower and the width of tibial intercondylar eminence was smaller in female patients than those in the female control group with statistical significance (P<0.05). Logistic regression analysis showed that both a low height of medial tibial intercondylar eminence and a narrow width of tibial intercondylar eminence were risk factors of ACL injury in females (P<0.05). For the width of medial tibial intercondylar eminence, the ROC curve showed that the diagnostic threshold was 8.30 mm, and the AUC was 0.684 [95%CI (0.611, 0.751)], the sensitivity and specificity were 63.64% and 72.41%, respectively; for the height of medial tibial intercondylar eminence, the diagnostic threshold was 11.30 mm, and the AUC was 0.699 [95%CI (0.627, 0.756)], the sensitivity was 89.39%, and the specificity was 47.41%. Conclusions The reduced width of tibial intercondylar eminence is a risk factor and effective predictor of non-contact ACL injury in males. Both the reduced height of the medial tibial intercondylar eminence and the reduced width of tibial intercondylar eminence are risk factors and may be predictors for non-contact ACL injury in females.