Objective To investigate the effectiveness of cannulated lag screws combined with lateral supporting plates in the treatment of Hoffa fracture of Letenneur type I and type III. Methods Between May 2004 and April 2011, 11 patients with Hoffa fracture of Letenneur type I and type III were treated, including 6 males and 5 females with an average age of 36 years (range, 25-47 years). Factures were caused by traffic accident in 8 cases, by falling in 2 cases, and by the other in 1 case. Fracture involved the left knee in 7 patients and the right knee in 4 patients. According Letenneur’s classification criteria, there were 7 type I fractures (6 lateral condyle fractures and 1 medial condyle fracture) and 4 type III fractures (3 lateral condyle fractures and 1 medial condyle fracture). Of 11 fractures, 9 were fresh fractures and 2 were old fractures. Two 6.5 mm cannulated lag screws combined with lateral supporting plates were used to fix fractures by anterolateral or anteromedial incision. Results All incisions achieved primary healing with no early complication. All patients were followed up 12-26 months (mean, 15 months). X-ray films showed bone healing with an average healing time of 15 weeks (range, 10-18 weeks). No loosening or breaking of internal fixator was observed; the removal time of internal fixation was 9-15 months (mean, 12 months). Accoding to Letenneur’s functional assessment system, the results were excellent in 7 cases, good in 3 cases, and poor in 1 case at last follow-up. Conclusion Cannulated lag screws combined with lateral supporting plates fixation is effective in treatment of Hoffa fracture of Letenneur type I and type III with a high union rate; anterolateral or anteromedial approach is the first choice for Hoffa fracture of type I and type III, especially for complicating by tibial plateau fracture or patella fracture.
Objective To produce a decellularized cartilage matrix (DCM) and investigate its possibil ity to be used as a scaffold for tissue engineering. Methods Fresh bovine articular cartilage from knee joints was sl iced, freeze-dried and freeze-ground into fine powder, and then was treated sequentially with Trypsin, Triton X-100 and hypotonic solution for decellularization. The decellularized matrix was freeze-dried for shaping and cross-l inked by UV radiation. Histological, immunohistological, SEM, porosity assays and biomechanical assays were used to characterize the DCM. BMSCs were isolated from rabbit bone marrow aspirate and cultured in DCM extraction medium of different concentration (100%, 10% and 1%) for 0, 24, 48 and 72 hours, respectively, to detect the release rate of the lactate dehydrogenase (LDH). The DMEM medium (5% FBS) served as the control. Biocompatibil ity was evaluated using BMSCs (1 × 107/mL) cultured with DCM. Results The DCM showed white spongy appearances, and histological analysis showed that the material was constructed by cartilage particles without any cells or cell fragments left in the matrix. Immunohistology staining and alcian blue staining showed that DCM retained the collagen and glycosaminoglycan components of cartilaginous matrix. SEM scanning showed that DCM had a porous spongy-l ike structure with the aperture ranging 30-150 μm .The porosity assay showed that the average porosity was 89.37% and the average aperture was 90.8 μm. The mechanical assay showed that there was no difference for the compress module before and after the decellularization process, which was (17.91 ± 0.98) MPa and (15.12 ± 0.77) MPa, respectively (P gt; 0.05), but were both statistical different from normal articular cartilage [(26.30 ± 1.98) MPa, P lt; 0.05]. The LDH release rate in the DCM extraction medium of different concentration was not significantly different from that in the normal DMEM medium (P gt; 0.05). The cell adhesion test showed BMSCs grew well on DCM without any signs of growth inhibition. Conclusion Articular cartilage can be decellularized and fabricated into a scaffold which retains the major components of cartilaginous matrix. DCM has goodbiochemical, biophysical characteristics and good biocompatibil ity with cultured BMSCs and may be used as a novel scaffold for tissue engineering studies.
Objective To investigate the effect of notochordal cells (NCs) conditioned medium (NCCM) on theprol iferation and differentiation of bone marrow mesenchymal stem cells (BMSCs). Methods NCs and BMSCs wereisolated from the thoracolumbar intervertebral disc and the femurs of 4-week-old Japanese white rabbits, respectively. NCswere cultured with DMEM/F12 medium containing 15% FBS for 5 days to prepare NCCM. The experiment consisted of2 groups: BMSCs were cultured with NCCM in experimental group and with DMEM/F12 medium containing 15% FBSin control group. The prol iferation of BMSCs was assessed by cell counting kit-8 at 1, 3, 5, 7, 9, and 14 days after culture;the expression of proteoglycan and collagen type II were determined by immunofluorescence and real-time fluorescentquantitative PCR at 7 and 14 days after culture. Results NCs and BMSCs were successfully isloated. At 5, 7, 9, and 14days, the number of BMSCs in the experimental group was significantly more than those in the control group (P lt; 0.05).At 7 and 14 days, there was no expression or less expression of proteoglycan and collagen type II in the control group;however, there was a lot of expression of proteoglycan and collagen type II in the experimental group, and the expressionswere higher at 14 days than at 7 days. At 7 and 14 days after culture, the mRNA expressions of proteoglycan and collagentype II were significantly higher in the experimental group than in the control group (P lt; 0.05), and at 14 days than at 7days in the experimental group (P lt; 0.05). Conclusion NCCM can promote the prol iferation and the differentiation ofBMSCs into chondroyte-like cells, which provides the basis for NCs and BMSCs as seed cells in the treatment of degenerativedisc disease.
Objective To evaluate the short-term cl inical outcomes of metal-on-metal total hi p resurfacing arthroplasty in treating osteonecrosis of the femoral head (ONFH) in young and middle-aged patients and to compare with patients of hip osteoarthritis at the same period. Methods From July 2006 to October 2008, 33 patients (45 hips) with ONFH (ONFH group) and 39 patients (45 hips) with osteoarthritis (osteoarthritis group) were treated with metal-on-metal total hipresurfacing arthroplasty. In ONFH group, there were 18 males (27 hips) and 15 females (18 hips) with an average age of 42.7 years (range 19-58 years), including 22 left hips and 23 right hips. The causes were trauma (4 cases), glucocorticoid (25 cases), drugs (2 cases), alcohol (1 case), and psoriasis (1 case). According to Steinberg classification, there were 10 hips at stage III, 18 hips at stage IV a, 13 hips at stage IV b, and 4 hips at stage IV c. The Harris score was 52.0 ± 4.6. The disease course was 1-12 years. In osteoarthritis group, there were 26 males (30 hips) and 13 females (15 hips) with an average age of 47.1 years (range 42-65 years), including 17 left hips and 28 right hips. The causes were degenerative arthritis (23 cases), trauma (11 cases), and ankylosing spondyl itis (5 cases). The Harris score was 57.0 ± 3.8. The disease course was 3-17 years. There were no significant differences in general data between two groups (P gt; 0.05). Results All incisions achieved heal ing by first intention without compl ications of infection and thrombosis of deep vein of lower extremities. The patients were followed up for 26 months in ONFH group and 28 months in osteoarthritis group. Femoral neck fracture occurred in 1 case of osteoarthritis group after 4 months, who received total hip arthroplasty; no compl ication of prosthesis loosening, dislocation, incision infection, osteonecrosis, and bone absorption occurred in other patients. At last follow-up, the Harris scores were 93.0 ± 5.5 in ONFH group and 94.0 ± 2.4 in osteoarthritis group, showing no significant difference between two groups (P gt; 0.05); but there were significant differences between pre- and post-operation (P lt; 0.01). Conclusion The cl inical short-term outcomes ofmetal-on-metal total hip resurfacing arthroplasty to treat ONFH are satisfactory. It can achieve similar outcomes to that ofosteoarthritis group. More cases and long-term follow-up are needed to investigate long-term cl inical outcomes.
Objective To evalute the cl inical outcomes of two different surgical treatments for arachnoid cysts in sacral canal. Methods From January 2004 to March 2009, 55 cases of arachnoid cysts in the sacral canal were treated by traditonal simple sacral laminectomies with resection of the cysts (group A, 25 cases) and novel CT-guided percutaneous fibrin glue therapy of arachnoid cysts (group B, 30 cases). Of them, there were 23 males and 32 females, aging 15-66 years with an average of 42.6 years; the duration of symptoms was 6 months to 15 years with an average of 3.5 years. L5-S1 was involved in 22 cases, S1,2 in 25 cases, S2,3 in 12 cases, S2 in 8 cases, and presacral in 2 cases. The size of cysts was 1.5 cm × 1.0 cm to 6.0 cm × 2.8 cm. The MRI examination showed that all patients had cysts in the sacral canal. There were no significant difference (P gt; 0.05) in sex, ages, disease duration and cysts size between two groups. Preoperative data and postoperative lumbosacral pain and function improvement were analyzed and compared between two groups. Results All operations were performed successfully. The operative time, blood loss and hospital ization days of group B were significantly less than those of group A (P lt; 0.01). All 55 cases were followed up from 9 to 61 months (mean 23 months). In group A, postoperative cerebrospinal fluid leakage (25 cases), intracranial infection (2 cases), nerve injury (3 cases), and nerve root irritation (8 cases) occurred; in group B, mild meningitis (3 cases) and low grade fever (5 cases) occurred. Except for nerve injury, other compl ications were cured after symptomatic management. During the follow-up, 2 recurrent cases were found in group A and 1 case in group B. Of them, 2 recurrent cases were treated with CT-guided percutaneous fibrin glue therapy of arachnoid cysts, and cysts disappeared. For two groups, there were significant differences in Oswestry functional disabil ity index and visual analogue scale score between preoperation and postoperation (P lt; 0.01), and in the rate of score improvement between two groups (P lt; 0.01). According to the rating scale, the excellent and good rates of pain improvement were 64% in group A and 100% in group B; the excellent and good rates of function improvement were 24% in group A and 97% in group B. Conclusion CT-guided percutaneous fibrin glue therapy for arachnoid cysts in the sacral canal is a mini-invasive, safe, effective, and economical method, it may be better choices for the treatment of arachnoid cysts in the sacral canal.
Objective To study the operative procedure and effect of arthroscopic reconstruction of both anterior cruciate l igament (ACL) and posterior cruciate l igament (PCL) with anterior tibial is tendon allograft. Methods From February 2005 to July 2006, 10 cases of both ACL and PCL rupture were reconstructed with anterior tibial is tendon allograft, including 7 men and 3 women, aging 18-45 years with an average of 30.2 years. The locations were left knee in 6 cases and right knee in 4 cases. All of them had identified trauma history. The disease course was about 1-3 weeks (mean 1.8 weeks). Both ACLand PCL were reconstructed under arthroscope with allograft anterior tibial is tendon of 26-28 cm in length and immobil ization with extention position brace was given for 4 weeks after operation. The active flex knee exercise was done from 0-90° at 4 weeks and more than 90° at 6 weeks. Results All operations were finished successfully, there were no blood vessel and nerve injury. The operative time was 90-110 minutes (mean 100 minutes). The wound healed by first intention and no early compl ication occurred. Ten cases were followed up for 12 months to 15 months with an average of 13.5 months. Thier gait was normal, knee activity degree was 0-135°. The anterior drawing tests and media and lateral stress tests were negative after operation in 10 cases; and the posterior drawing tests were negative in 8 cases and 2 cases was at grade I. Hydra arthrosis of knee occurred in 2 cases and was cured after remove of fluid and injection of sodium hyaluronate. The Lysholm knee function score was increases from 24.89 ± 5.39 before operation to 96.00 ± 4.59 at 12 months after operation, showing significant difference (P lt; 0.05). Conclusion Arthroscopic reconstruction of both ACL and PCL with anterior tibial is tendon allograft has the advantages of short operation time, less compl ications and good cl inical effects.
Objective To investigate cl inical therapeutic effect on early stage femoral head necrosis managed with allogeneic cortical bone cage support combining with autologous cancellous bone grafting through core decompression tunnel, and to discuss its effect on preventing femoral head collapse and influence factors. Methods From January 2002 to December2005, 40 patients (42 hips) with femoral head necrosis underwent core decompression and an allogeneic threaded cortical bone supporting cage which was loaded with autologous cancellous bone inside. There were 26 males and 14 females, aging 27-45 years (mean 35.6 years). The disease course was 6-28 months (mean 18.3 months). All the cases underwent X-ray, CT and MRI examination to confirm the diagnosis and necrosis area. Twelve hips were at Ficat stage I, 29 hip at stage II, and 1 hips at stage III. Harris hip score system was used to evaluate the hip function pre- and post-operatively. X-ray films were taken regularly after operation. Results All the wound healed by first intention without any compl ications such as infection, fracture, nerve and vascular injury, and deep vein thrombosis. Thirty-six patients (38 hips) were followed up for 24-58 months with an average of 38 months. All the patients had different degrees of improvement in cl inical symptoms. According to Harris hip score system, the Harris score was 63.1 ± 6.4 before operation and 82.3 ± 16.5 at the last follow-up, showing significant difference (P lt; 0.001). The results were excellent in 24 hips, good in 11 hips, fair in 2 hips and poor in 1 hips. The X-ray films showed femoral head repairing and no advancement of osteonecrosis and collapsing in 23 patients (24 hips) 24 months after operation. Conclusion Allogeneic cortical bone cage support combining with autologous cancellous bone grafting is suitable for managing early stagefemoral head necrosis and its short- and middle-term effect is satisfactory.
Objective To investigate the protective effect of the antioxidant glutathione (GSH) on the steroid-induced imbalance between osteogenesis and adipogenesis in human bone marrow mesenchymal stem cells (BMSCs). Methods The BMSCs were isolated from the proximal femur bone marrow from 3 patients of femoral neck fracture and were separated, cultured, and purificated by density gradient centrifugation and adherent wall methodin vitro. The third generation BMSCs were divided into 5 groups: group A, BMSCs (1×105 cells/mL); group B, BMSCs (1×105 cells/mL)+10 μmol/L dexamethasone; group C, BMSCs (1×105 cells/mL)+10 μmol/L dexamethasone+5 μmol/L GSH; group D, BMSCs (1×105 cells/mL)+10 μmol/L dexamethasone+10 μmol/L GSH; group E, BMSCs (1×105 cells/mL)+10 μmol/L dexamethasone+50 μmol/L GSH. After cultured for 7 days, the reactive oxygen species expression was detected by flow cytometry; the superoxide dismutase (SOD) and Catalase mRNA expressions were determined by RT-PCR; the peroxisome proliferator-activated receptors γ (PPAR-γ), CCAAT/enhancer-binding family of proteins (C/EBP), Runx2, and alkaline phosphatase (ALP) mRNA expressions were evaluated by real-time fluorescence quantitative PCR. After cultured for 21 days, Oil red O staining was used to observe the adipogenesis differentiation of cells, and the expressions of related proteins were detected by Western blot. Results The reactive oxygen species expression in group B was obviously higher than in the other groups, in group C than in groups A, D, and E, and in groups D, E than in group A, all showing significant differences between groups (P<0.05); but there was no significant difference between groups D and E (P>0.05). The oil red O staining positive cells in group B were obviously more than the other groups, and groups C, D, E, and A decreased sequentially, the absorbance (A) values had significant differences between groups (P<0.05). RT-PCR detection showed that the relative expressions of SOD and Catalase mRNA in group B were significantly lower than those in the other groups, while in group C than in groups A, D, and E (P<0.05), but there was no significant difference among groups A, D, and E (P>0.05). Real-time fluorescence quantitative PCR detection showed that the relative expressions of PPAR-γ and C/EBP mRNA in group B were significantly higher than those in the other groups, while in group C than in groups A, D, and E, and in groups D, E than in group A (P<0.05); but there was no significant difference between groups D and E (P>0.05). The relative expressions of Runx2 and ALP mRNA in group B were significantly lower than those in the other groups, while in group C than in groups A, D, and E, and in groups D, E than in group A (P<0.05); but there was no significant difference between groups D and E (P>0.05). Western blot detection showed that the relative expression of PPAR-γ and C/EBP protein in group B was significantly higher than those in the other groups, and groups C, D, E, and A decreased sequentially, all showing significant differences between groups (P<0.05). The relative expression of Runx2 and ALP protein in group B was significantly lower than those in the other groups, and groups C, D, E, and A increased sequentially, all showing significant differences between groups (P<0.05). Conclusions GSH can inhibit the adipogenesis differentiation and enhance the osteogenic differentiation of human BMSCs by reducing the intracellular reactive oxygen species level; and in a certain range, the higher the concentration of GSH, the more obvious the effect is.
Objective To research the biomechanical effect of different length bone plates on treatment of tibial shaft fracture. Methods Forty-five tibia specimens from fresh adult corpse (20-40 years old) were donated (30-38 cm in length, 34 cm on average) and were divided into 3 groups randomly (n=15). Under the following three conditions, the experiment was made separately. Compression stress-strain indexes of whole tibia were determined under the reverse, three spots curving and compression. The vertical elastic strain was 0-1 000 N, the reverse angle was 0-3º, and three bending stresswas 0-400 N. Then the center-section squint non-damage bone fracture model was made, fracture was fixed by 6, 10, 14stainless steel AO LC-DCP, respectively. The compression stress-strain indexes were determined under reverse angle, three spots curving and compression, statistical analysis was done. Results The vertical direction strain value of 6, 10 and 14 hole steel plate under vertical compressions, was 0.449 ± 0.241, 0.093 ± 0.003, 0.139 ± 0.005, respectively ; showing significant difference between 10 and 14 hole steel plates and 6 steel plate (P lt; 0.01) and no significant difference between 10 and 14 hole steel plate (P gt; 0.05). The lateral strain value of 6, 10 and 14 hole steel plate was 0.120 0 ± 0.000 4, 0.127 5 ± 0.010 0, 0.237 0 ± 0.000 6 respectively, indicating a significant difference between stell plates of 6 and 10 hole and 14 hole steel plate (P lt; 0.01) and no difference between 6 and 10 hole steel plate (P gt; 0.05). The torque of 6, 10 and 14 hole steel plate was (5.066 ± 2.715) × 10-3, (5.671 ± 2.527) × 10-3 and (4.570 ± 2.228) × 10-3 Nm, respectively and three spot curving vertical direction strain value was 0.049 ± 0.009, 0.124 ± 0.017, 0.062 ± 0.009, respectively. There were significant differences between various steel plates (P lt; 0.01). Conclusion For the fixation of tibial obl ique fracture, 14 hole steel plate’s stabil ities of anti-vertical compression, anti-reverse and anti-curving are better than those of 6 hole steel plate under the condition of the same material qual ity, thickness, width and screw quantity used.