ObjectiveTo investigate the effectiveness of limited open reduction via “door-shaft method” and internal fixation with locking plate for two- and three-part fractures of the proximal humerus.MethodsThe clinical data of 64 patients with proximal humeral fractures who were admitted between January 2013 and December 2016 and met the selection criteria were retrospectively analyzed. There were 23 males and 41 females, with an average age of 68.0 years (range, 50-89 years). The injuries were caused by falling in 57 cases, traffic accident in 5 cases, and falling from height in 2 cases. The interval between injury and operation was 1-7 days (mean, 2.1 days). According to Neer classification, there were 28 cases of two-part fractures and 36 cases of three-part fractures. According to the angulation direction of the proximal humeral neck shaft angle, there were 21 cases of adduction fractures and 43 cases of abduction fractures. The fractures were treated with limited open reduction via “door-shaft method” and proximal humerus internal locking systems for internal fixation. The operation time, intraoperative blood loss, number of fluoroscopy, hospital stay, and complications were recorded. The fracture healing was reviewed by X-ray film and the healing time was recorded. The shoulder joint function was evaluated by Neer score standard.ResultsThe operation time was 45-127 minutes, with an average of 82.3 minutes. The intraoperative blood loss was 30-125 mL, with an average of 62.7 mL. Intraoperative fluoroscopy was performed 30-69 times, with an average of 37.0 times. The hospital stay was 6-23 days, with an average of 10.3 days. All incisions healed by first intention. All patients were followed up 12-37 months, with an average of 18.3 months. X-ray film re-examination showed that all fractures healed, the healing time was 12-21 weeks, with an average of 14.3 weeks. After operation, 3 cases had shoulder stiffness and 1 case had fracture malunion. At last follow-up, the Neer score of shoulder joint function was 49-97, with an average of 83.1. Among them, 38 cases were excellent, 13 cases were good, 10 cases were fair, and 3 cases were poor. The excellent and good rate was 79.7%. The excellent and good rate of patients with two-part fractures was 82.1% (23/28), and the excellent and good rate of patients with three-part fractures was 77.8% (28/36).ConclusionThe “door-shaft method” not only reduces the difficulty of the Joystick technique in the reduction of proximal humerus fractures, but also provides auxiliary stability. It is used for limited open reduction and internal fixation with locking plate to treat the two- and three-part fractures of the proximal humerus, which can achieve good effectiveness.
Objective To evaluate the feasibility and short-term effectiveness of polyaxial locking plate for fixation of femoral neck fracture in the middle-aged and elderly patients. Methods A retrospective analysis was made on the clinical data of 13 patients with femoral neck fracture undergoing fixation with polyaxial locking plates between September 2013 and June 2015 (group A) and 13 patients with femoral neck fracture undergoing fixation with three cannulated screws in the same period (group B). There was no significant difference in gender, age, side, cause of injury, Garden type, type of fracture position, type of Pauwels angle, Singh index, time between injury and operation, and preoperative complications between 2 groups (P>0.05). The femoral neck shortening at 1 year postoperatively, and fracture nonunion, femoral head necrosis, and Harris hip score at last follow-up were compared between 2 groups. Results The follow-up time was (19.23±3.98) months in group A and (18.00±3.61) months in group B, showing no significant difference between 2 groups (t=2.063,P=0.417). No femoral head necrosis occurred in group A, but head necrosis occurred in 1 case of group B, and hemiarthroplasty was performed. There was no significant difference in the rate of femoral head necrosis between 2 groups (χ2=0.000,P=1.000). Bone union was obtained in the other patients of 2 groups. The Harris hip score of group A (85.23±2.95) was significantly higher than that of group B (81.92±3.64) at last follow-up (t=2.064,P=0.018). No infection or internal fixation failure occurred in 2 groups. One case had pain at the outer thigh at 1 month after operation in group A, but pain relief was achieved at 3 months after operation. At 1 year after operation, no femoral neck shortening occurred in group A, but degree I, II, and III femoral neck shortening was observed in 3, 2, and 8 cases of group B, respectively, showing significant difference between 2 groups (Z=–4.714,P=0.000). Conclusion Although fixation with polyaxial locking plate for femoral neck fracture in the middle-aged and elderly patients has similar femoral head necrosis rate to fixation with cannulated screws, it has advantages in preventing neck shortening and improving hip joint function after operation.
Objective To explore effectiveness of minimally invasive internal fixation with locking plates for mid-shaft clavicle fractures. Methods Between October 2022 and August 2023, 28 patients with mid-shaft clavicle fractures were treated by minimally invasive internal fixation with locking plates. There were 10 males and 18 females with a mean age of 46.2 years (range, 18-74 years). The fractures were caused by traffic accident in 16 patients, sports-related injury in 7 patients, and other injuries in 5 patients. According to Robinson classification, the fractures were classified as type 2A1 in 1 case, type 2A2 in 6 cases, type 2B1 in 15 cases, and type 2B2 in 6 cases. The interval between fracture and operation ranged from 5 hours to 21 days (median, 1.0 days). The pain visual analogue scale (VAS) score was 8.1±1.6. The VAS score at 3 days after operation and the occurrence of complications after operation were recorded. During follow-up, X-ray films were re-examined to observe the healing of the fracture; the shoulder joint function was evaluated according to the Constant-Murley score at 6 months, and the length of the incision scar (total length of the distal and proximal incisions) was measured. ResultsAll operations were successfully completed without any subclavian vascular or nerve damage. All incisions healed by first intention. The VAS score was 1.2±0.7 at 3 days after operation, and there was a significant difference in VAS score between pre- and post-operation (t=8.704, P<0.001). At 1 week after operation, the patient’s shoulder was basically painless, and they resumed normal life. All patients were followed up 12-20 months (mean, 13.3 months). X-ray films showed that the bone callus began to form at 2-4 months after operation (mean, 2.7 months). There was no delayed healing or non healing of the fracture, and no loosening or fracture of the internal fixators during follow-up. At 6 months after operation, the mean total incision length was 1.5 cm (range, 1.1-1.8 cm); no patient complained of numbness or paresthesia on subclavicular region or anterior chest wall. The Constant-Murley score of shoulder joint function was 93-100 (mean, 97.6). Conclusion Minimally invasive internal fixation with locking plates is a good surgical method for treating mid-shaft clavicle fractures, with simple operation, minimal trauma, good postoperative results, and high satisfaction.
Objective To establish the finite element model of Y-shaped patellar fracture fixed with titanium-alloy petal-shaped poly-axial locking plate and to implement the finite element mechanical analysis. Methods The three-dimensional model was created by software Mimics 19.0, Rhino 5.0, and 3-Matic 11.0. The finite element analysis was implemented by ANSYS Workbench 16.0 to calculate the Von-Mises stress and displacement. Before calculated, the upper and lower poles of the patella were constrained. The 2.0, 3.5, and 4.4 MPa compressive stresses were applied to the 1/3 patellofemoral joint surface of the lower, middle, and upper part of the patella respectively, and to simulated the force upon patella when knee flexion of 20, 45, and 90°. Results The number of nodes and elements of the finite element model obtained was 456 839 and 245 449, respectively. The max value of Von-Mises stress of all the three conditions simulated was 151.48 MPa under condition simulating the knee flexion of 90°, which was lower than the yield strength value of the titanium-alloy and patella. The max total displacement value was 0.092 8 mm under condition simulating knee flexion of 45°, which was acceptable according to clinical criterion. The stress concentrated around the non-vertical fracture line and near the area where the screws were sparse. Conclusion The titanium-alloy petal-shaped poly-axial locking plate have enough biomechanical stiffness to fix the Y-shaped patellar fracture, but the result need to be proved in future.
Objective To investigate the surgical technique and effectiveness of volar locking plates for senile delayed distal radius fractures. Methods Between October 2014 and September 2015, 25 cases of delayed distal radius fractures were treated by volar locking plates. There were 3 males and 22 females with an average age of 73 years (range, 65-87 years). Injury was caused by tumble in 19 cases and by traffic accident in 6 cases. All the cases had closed fracture. According to the AO classification, 10 cases were rated as type A2, 7 cases as type A3, 3 cases as type B3, and 5 cases as type C1. The manual reduction and plaster immobilization were performed in 18 cases first, but reduction failed; no treatment was given in 7 cases before surgery. The time from injury to surgery was from 33 to 126 days (mean, 61 days). Preoperatively, the volar tilting angle was (–16.0±3.1)°; the ulnar inclining angle was (10.8±7.0)°; the radial shortening was (11.2±3.6) mm; the wrist range of motion was (41.0±7.5)° in flexion and was (42.0±6.3)° in extension; and the grip strength was 33.0%±3.1% of normal side. Results All incisions healed primarily, and no postoperative complication occurred. The patients were followed up 1-1.5 years (mean, 1.3 years). The X-ray films showed that fracture union was achieved in all the patients, with the mean healing time of 9.2 weeks (range, 8-12 weeks); the displacement of the articular surface was less than 1 mm. At last follow-up, the volar tilting angle was (13.1±3.2)°; the ulnar inclining angle was (21.9±4.6)°; the radial shortening was (2.0±1.1) mm; the wrist range of motion was (52.0±11.7)° in flexion and was (65.0±4.8)° in extension; and the grip strength was 84.0%±4.2% of normal side; all showed significant difference when compared with preoperative ones (P<0.05). According to the Gartland and Werley score, the results were excellent in 15 cases, good in 6 cases, fair in 2 cases, and poor in 2 cases at last follow-up; the excellent and good rate was 84%. Conclusion By the good design of the volar locking plate and the command of surgical techniques, good effectiveness can be achieved in the treatment of senile delayed distal radius fracture.
Objective To analyze the effectiveness of flexible internal fixation with locking plate for distal femoral fractures. Methods Between January 2015 and June 2016, 21 cases of distal femoral fractures were treated. There were 5 males and 16 females with an average age of 62 years (range, 32-88 years). Injury was caused by falling in 14 cases, by traffic accident in 5 cases, and by falling from height in 2 cases. The fractures located at the left side in 13 cases and the right side in 8 cases. Twenty cases were fresh closed fractures and 1 case was open fracture. According to AO/Association for the Study of Internal Fixation (AO/OTA) typing, there were 5 cases of type 33-A1, 3 of type 33-A2, 8 of type 33-A3, 2 of type 33-C2, and 3 of type 33-C3. The time from injury to operation was 3-13 days (mean, 6.5 days). Results All operation incisions healed primarily. Eighteen patients were followed up 12-24 months (mean, 16 months). All fractures healed, and the healing time was 8-24 weeks (mean, 16.6 weeks). The articular surface was smooth and the thigh length was recovered. No screw loosening, plate breakage, valgus or varus of the knee, stiff of the knee or non-unions occurred during follow-up. There was no significant difference in visual analogue scale (VAS) score between at 6 and 12 months after operation (P>0.05), and the difference was significant bewteen the other time points (P<0.05). There were significant differences in the range of motion of knee between 1 month and 3, 6, 12 months (P<0.05); there was no significant difference between 3, 6, and 12 months (P>0.05). There were significant differences in the Neer scores between 1, 3, 6, and 12 months after operation (P<0.05). According to Neer score criteria, the results were excellent in 12 cases and good in 6 cases at 12 months after operation. Conclusion Flexible internal fixation with locking plate for distal femoral fractures can get good functional recovery.
ObjectiveTo review the research progress on intra-articular screw penetration in proximal humeral fracture treated with locking plate. MethodsThe domestic and foreign literature about the proximal humeral fracture treated with locking plate was extensively reviewed. The incidence of screw penetration and risk factors were summarized from both primary and secondary screw penetrations, and the reasons of the intra-articular screw penetration and the technical solutions to avoid the penetration were analyzed. ResultsThe incidence of intra-articular screw penetration is about 11%-30%, which includes primary and secondary screw penetrations. The primary screw penetration is related to improper operation, inaccurate measurement, and “Steinmetz solid” effect, which results in inadequate fluoroscopy and blind zone. The secondary screw penetration is related to the loss of reduction and varus, collapse, and necrosis of the humeral head. The risk factors for intra-articular screw penetration include the bone mass density, the fracture type, the quality of fracture reduction, the applied location, number, and length of the plate and screws, and whether medial column buttress is restored. Improved fracture reduction, understanding the geometric distribution of screws, good intraoperative fluoroscopy, and reconstruction of medial column buttress stability are the key points for success. ConclusionThe risk of the intra-articular screw penetration in the proximal humeral fractures treated with locking plates is still high. Follow-up studies need to further clarify the cause and mechanism of screw penetration, and the risk factors that lead to screw penetration, in order to effectively prevent the occurrence of this complication.
ObjectiveTo investigate the effectiveness of volar oblique T-type locking plate and raft screws reduction and fixation in the treatment of extreme distal radius fractures.MethodsBetween July 2014 and July 2018, 15 patients with extreme distal radius fractures were treated with volar oblique T-type locking plate and raft screws reduction and fixation. There were 6 males and 9 females, aged from 30 to 66 years with an average age of 56.6 years. The cause of injury was falling from height in 2 cases and falling in 13 cases. All of them were fresh closed injuries. The fractures were rated as type 23C1 in 8 cases and as type 23C2 in 7 cases according to AO/Orthopaedic Trauma Association (AO/OTA) classification. There were 7 cases of ulnar styloid process fracture and 2 cases of distal radioulnar joint instability. The time from injury to operation was 6 to 9 days with an average of 7.3 days. The fracture healing and the radial height, palm inclination, and ulnar deviation were observed by X-ray reexamination. Cooney score was used to evaluate the effectiveness.ResultsAll incisions healed by first intention. All patients were followed up 12-24 months, with an average of 14.6 months. X-ray films showed that all fractures healed, and the healing time ranged from 5 to 10 months, with an average of 8.2 months. No internal fixation failure or secondary fracture displacement occurred. At last follow-up, the radial height, palm inclination, and ulnar deviation recovered well, and the differences between pre- and post-operation were significant (P<0.05). The pain, function, activity, and grip strength scores and the total score of Cooney score were significantly higher than those before operation (P<0.05). There were 11 cases of excellent, 3 cases of good, and 1 case of good, with an excellent and good rate of 93%.ConclusionFor extreme distal radius fractures, the volar oblique T-type locking plate and raft screws reduction and fixation can restore the radialheight, palm inclination, and ulnar deviation, fix firmly, and recover the wrist joint function exercise early, and obtain satisfactory effectiveness.
Objective To compare clinical outcomes between the performed titanium locking plate and nickel-titanium memory alloy embracing fixator for the treatment of multiple rib fractures, and to select a better internal fixator for multiple rib fractures. Methods A total of 206 consecutive patients with multiple rib fractures were admitted to Department of Cardiothoracic Surgery in Beijing Luhe Hospital of Capital Medical University from October 2011 to September 2016. According to different treatment strategies, the patients were divided into 2 groups: a performed titanium locking plate group (a titanium plate group, n=105) and a nickel-titanium memory alloy embracing fixator group (an embracing fixator group, n=101). There were 82 males and 23 females with a mean age of 46.5±9.7 years ranging from 23 to 65 years in the titanium plate group, and 83 males and 18 females with a mean age of 44.7±10.3 years ranging from 19 to 63 years in the embracing fixator group. The preoperative data, curative outcomes, visual analogue scale (VAS) and postoperative complications were compared between the two groups. Results There was no statistical difference in the preoperative data between the two groups, and all patients successfully completed the operation. Compared with the embracing fixator group, the incision length and operation time were shorter, intraoperative bleeding and VAS score were less, and curative outcome was better in the titanium plate group. Conclusion The performed titanium locking plate has a great advantage in the clinic, which can be preferred.
Objective To investigate the effectiveness of tunnel osteogenesis technique combined with locking plate in the treatment of aseptic non-hypertrophic nonunion of femoral shaft. MethodsThe clinical data of 23 cases of aseptic non-hypertrophic nonunion of femoral shaft treated with tunnel osteogenesis technique combined with locking plate between January 2017 and December 2020 were retrospectively analysed. There were 17 males and 6 females with an average age of 41.4 years (range, 22-72 years). There were 22 cases of closed fracture and 1 case of open fracture. The types of internal fixation at admission included intramedullary nail in 14 cases and steel plate in 9 cases. The number of nonunion operations received in the past was 0 to 1; the duration of nonunion was 6-60 months, with an average of 20.1 months. Among them, there were 17 cases of aseptic atrophic nonunion of the femoral shaft and 6 cases of dystrophic nonunion. Twenty-two cases were fixed with 90° double plates and 1 case with lateral single plate. The operation time, theoretical blood loss, hospitalization stay, nonunion healing, and postoperative complications were recorded. Harris hip function score, Lysholm knee function score, lower extremity function scale (LEFS), and short-form 36 health survey scale (SF-36) were used at last follow-up to evaluate hip and knee functions. Visual analogue scale (VAS) score was used to evaluate the relief of pain at 1 day after operation and at last follow-up. ResultsThe average operation time was 190.4 minutes, the average theoretical blood loss was 1 458.4 mL, and the average hospitalization stay was 8.2 days. All the 23 patients were followed up 9-26 months, with an average of 18.2 months. The healing time of nonunion in 22 patients was 3-12 months, with an average of 5.6 months. There were 8 cases of limb pain, 8 cases of claudication, 6 cases of limitation of knee joint movement, and 2 cases of limitation of hip joint movement. At last follow-up, the imaging of 1 patient showed that the nonunion did not heal, accompanied by pain of the affected limb, lameness, and limitation of knee joint movement. At 1 day after operation, the VAS score of 23 patients was 6.5±1.8, the pain degree was good in 7 cases, moderate in 12 cases, and poor in 4 cases; at last follow-up, the VAS score was 0.9±1.3, the pain degree was excellent in 21 cases and good in 2 cases, which were significantly better than those at 1 day after operation (t=12.234, P<0.001; Z=–5.802, P<0.001). At last follow-up, the average Harris hip function score of 22 patients with nonunion healing was 94.8, and the good rate was 100%; Lysholm knee function score averaged 94.0, and the excellent and good rate was 90.9%; LEFS score averaged 74.6; SF-36 physical functioning score averaged 85.0 and the mental health score averaged 83.6. ConclusionTunnel osteogenesis technique combined with locking plate in the treatment of aseptic non-hypertrophic nonunion of femoral shaft has a high healing rate and fewer complications, which can effectively relieve pain and improve lower limb function and quality of patients’ life.