ObjectiveTo establish a method to prefabricate titanium plate with three-dimensional (3-D) printing technique for correction of mandibular prognathism in sagittal splint ramous osteotomy (SSRO). MethodsBetween January 2012 and May 2013, 12 patients with mandibular prognathism (Angle III malocclusion) were treated. Among them, 9 cases were male and 3 cases were female. Their ages ranged from 19 to 35 years (mean, 25.6 years). With the 3-D facial CT data of these patients, 3-D printer was used to print the models for preoperational simulation. SSRO was performed on 3-D models, and the titanium plates were prefabricated on the models after the distal segments were moved backward and rotated according to occlusal splint. During operations, the proximal segments were fixed to distal segments by the prefabricated titanium plates. 3-D CT scans were taken to examine the temporomandibular joint position changes before operation and at 6 months after operation. ResultsThe skull models were manufactured by 3-D printing technique, and the titanium plates were reshaped on the basis of them. Twenty-four prefabricated titanium plates were placed during operations, and they all matched with the bone segments well. Evaluation of 3-D CT scans showed that the temporomandibular joint position had no change. All patients were followed up 7-12 months (mean, 10.6 months). The face type and dental articulation were improved greatly. All cases obtained satisfactory opening function and occlusion. ConclusionWith the titanium plate fabricated based on 3-D models, surgeons are able to improve or refine surgical planning so that the operation can be performed according to preoperative simulation precisely and the complications, such as dislocation of temporomandibular joint, can be prevented.
ObjectiveTo investigate the effectiveness of mini titanium plate for the treatment of intracapsular condylar fractures-type A. MethodsBetween March 2013 and July 2015, 22 cases (26 sides) of intracapsular condylar fractures-type A were treated with mini titanium plate through anterior auricular approach. There were 13 males and 9 females, aged from 16 to 32 years (mean, 22.7 years). The disease causes were traffic accident injury in 17 cases, falling injury in 4 cases, and heavy impact injury in 1 case. Five cases had intracapsular condylar fractures-type A only, and the other cases were accompanied with fractures of mandible, maxillary, or other part of jaw. All patients had different degrees of limitation of opening mouth, occlusal disorder, and joint pain, and the maximum opening was 5-16 mm (mean, 8.6 mm). All patients received surgical treatment within 2 to 9 days after injury (mean, 4 days). The clinical dysfunction index (DI) of Helkimo index was used to evaluate the mandibular motor function postoperatively. According to the 4 basic criterion of cure about mandibular condylar fractures by the international consensus conference in 1999, and maximal mouth opening by HE Dongmei et al., the surgical treatment effectiveness was evaluated. ResultsAll wounds healed at stage I, with no infection or other complications. All 22 cases were followed up 5-8 months (mean, 6 months). At 1 week after operation, the coronal spiral CT and three-dimensional reconstruction showed that contraposition of fractures was good, and the condyles located in the articular fossa. At 6 months after operation, the maximum opening was 33-42 mm (mean, 35.7 mm). After operation, 3 cases showed the mandible deflected to the affected side when opening, and limited lateral motion. According to the DI evaluation method in Helkimo index, there were 7 sides of DI grade 0, 18 sides of DI grade I, and 1 side of DI grade II. Based on surgical treatment effect of intracapsular condylar fractures-type A, occlusion recovery was obtained in 19 cases (86.36%), maximum opening degree of≥35 mm in 20 cases (90.91%), no symptoms of joint injury in 19 cases (86.36%), and no serious postoperative complications in 22 cases (100%); 17 cases (77.27%) were in accordance with the above 4 items. ConclusionMini titanium plate is one of the most effective approaches to treat intracapsular condylar fractures-type A.
ObjectiveTo explore the effectiveness of a new H-shaped anatomical titanium plate in treatment of posterior wall/posterior column acetabular fractures.MethodsBetween March 2012 and April 2019, 46 patients with acetabular fractures involving posterior wall/posterior column were treated with the new H-shaped anatomical titanium plates. There were 28 males and 18 females. The age ranged from 20 to 70 years, with an average of 45.5 years. Among the patients, 34 cases were injured by traffic accidents and 12 cases by falling from height. The time from injury to operation ranged from 2 to 14 days, with an average of 7 days. According to Letournel-Judet classification, there were 12 cases of posterior wall fractures, 1 case of posterior column fracture, 3 cases of transverse fractures, 9 cases of transverse fractures involving posterior walls, 8 cases of posterior column and posterior wall fractures, 2 cases of anterior column and posterior semi-transverse fractures, 3 cases of T-shaped fractures, and 8 cases of double column fractures. Matta reduction standard was used to evaluate fracture reduction and Merle d’Aubign-Postel score was used to evaluate hip joint function.ResultsAll operations were successfully completed. The time of posterior operation was 60-120 minutes, with an average of 80 minutes. The amount of intraoperative blood loss ranged from 200 to 600 mL, with an average of 300 mL. All the incisions healed by first intention and no infection, deep vein thrombosis, or sciatic nerve injury occurred. All 46 patients were followed up 6-72 months, with an average of 37 months. According to Matta reduction standard, 40 cases obtained anatomic reduction, 4 cases satisfactory reduction, 2 cases unsatisfactory reduction, and the satisfaction rate was 95.7% (44/46). All fractures healed, and the healing time was 3-6 months, with an average of 4.3 months. No internal fixation failure occurred during the follow-up. At last follow-up, the Merle d’Aubign-Postel score ranged from 6 to 18 (mean, 15.5), including 38 cases of excellent, 4 cases of good, 2 cases of fair, and 2 cases of poor, with an excellent and good rate of 91.3% (42/46). Heterotopic ossification occurred in 4 cases, traumatic arthritis in 4 cases, and osteonecrosis of femoral head in 2 cases after operation.ConclusionFor acetabular fractures involving posterior wall/posterior column, the new H-shaped anatomical titanium plate can provide stable fixation, satisfactory reduction, and good recovery of hip function.
The sternum is the pivotal component of the thoracic cavity. It is connected with the clavicle and ribs on the upper part and both sides respectively, and plays an important role in protecting the stability of the chest wall. Sternal resection usually results in a large segmental chest wall defect that causes the chest wall to float and requires sternal reconstruction. This paper reports a 62 years male patient with thymic squamous cell carcinoma with sternal metastasis, who underwent thymotomy, sternal tumor resection and autologous lilum graft combined with sternal reconstruction by titanium plate after relevant examination was completed and surgical contraindications were eliminated. The patient was followed up for 6 months, the respiratory and motor functions were normal and the thoracic appearance was good.
Objective To evaluate the effectiveness of using titanium alloy trabecular bone three-dimensional (3D) printed artificial vertebral body in treating cervical ossification of the posterior longitudinal ligament (OPLL). Methods A retrospective analysis was conducted on clinical data from 45 patients with cervical OPLL admitted between September 2019 and August 2021 and meeting the selection criteria. All patients underwent anterior cervical corpectomy and decompression, interbody bone graft fusion, and titanium plate internal fixation. During operation, 21 patients in the study group received titanium alloy trabecular bone 3D printed artificial vertebral bodies, while 24 patients in the control group received titanium cages. There was no significant difference in baseline data such as gender, age, disease duration, affected segments, or preoperative pain visual analogue scale (VAS) score, Japanese Orthopaedic Association (JOA) score, Neck Disability Index (NDI), vertebral height, and C2-7 Cobb angle (P>0.05). Operation time, intraoperative blood loss, and occurrence of complications were recorded for both groups. Preoperatively and at 3 and 12 months postoperatively, the functionality and symptom relief were assessed using JOA scores, VAS scores, and NDI evaluations. The vertebral height and C2-7 Cobb angle were detected by imaging examinations and the implant subsidence and intervertebral fusion were observed. Results The operation time and incidence of complications were significantly lower in the study group than in the control group (P<0.05), while the difference in intraoperative blood loss between the two groups was not significant (P>0.05). All patients were followed up 12-18 months, with the follow-up time of (14.28±4.34) months in the study group and (15.23±3.54) months in the control group, showing no significant difference (t=0.809, P=0.423). The JOA score, VAS score, and NDI of the two groups improved after operation, and further improved at 12 months compared to 3 months, with significant differences (P<0.05). At each time point, the study group exhibited significantly higher JOA scores and improvement rate compared to the control group (P<0.05); but there was no significantly difference in VAS score and NDI between the two groups (P>0.05). Imaging re-examination showed that the vertebral height and C2-7 Cobb angle of the two groups significantly increased at 3 and 12 months after operation (P<0.05), and there was no significant difference between 3 and 12 months after operation (P>0.05). At each time point, the vertebral height and C2-7 Cobb angle of the study group were significantly higher than those of the control group (P<0.05), and the implant subsidence rate was significantly lower than that of the control group (P<0.05). However, there was no significant difference in intervertebral fusion rate between the two groups (P>0.05). Conclusion Compared to traditional titanium cages, the use of titanium alloy trabecular bone 3D-printed artificial vertebral bodies for treating cervical OPLL results in shorter operative time, fewer postoperative complications, and lower implant subsidence rates, making it superior in vertebral reconstruction.