1. |
陈竺.推动转化医学发展应对人民健康挑战.中国科技奖励, 2011, 3:6-7.
|
2. |
Tam MD, Laycock SD, Bell D, et al. 3-D printout of a DICOM file to aid surgical planning in a 6 year old patient with a large scapular osteochondroma complicating congenital diaphyseal aclasia. J Radiol Case Rep, 2012, 6(1):31-37.
|
3. |
Mazzoni S, Marchetti C, Sgarzani R, et al. Prosthetically guided maxillofacial surgery:evaluation of the accuracy of a surgical guide and custom-made bone plate in oncology patients after mandibular reconstruction. Plast Reconstr Surg, 2013, 131(6):1376-1385.
|
4. |
岳卫荣.快速成型设备用于义齿加工的探讨.中国医疗设备, 2013, 27(12):135-137.
|
5. |
Olszewski R. Three-dimensional rapid prototyping models in cranio-maxillofacial surgery:systematic review and new clinical applications. P Belg Roy Acad Med, 2013, 2:43-77.
|
6. |
You JH, Kang SG, Kim BM. A novel measurement technique for the design of fenestrated stent grafts:comparison with threedimensional aorta models. Exp Clin Cardiol, 2013, 18(1):48-52.
|
7. |
欧阳洋, 黄建华, 李刚, 等. 3D-Recon 3D重建软件在腹主动脉瘤腔内修复术术前评估中的应用.腹部外科, 2014, 27(2):120-123.
|
8. |
Seol YJ, Kang TY, Cho DW. Solid freeform fabrication technology applied to tissue engineering with various biomaterials. Soft Matter, 2012, 8(6):1730-1735.
|
9. |
Derby B. Printing and prototyping of tissues and scaffolds. Science, 2012, 338(6109):921-926.
|
10. |
Murphy SV, Atala A. 3D bioprinting of tissues and organs. Nat biotechnol, 2014, 32(8):773-785.
|
11. |
Ozbolat IT, Yu Y. Bioprinting toward organ fabrication:challenges and future trends. IEEE Trans Biomed Eng, 2013, 60(3):691-699.
|
12. |
Zopf DA, Hollister SJ, Nelson ME, et al. Bioresorbable airway splint created with a three-dimensional printer. N Engl J Med, 2013, 368(21):2043-2045.
|
13. |
Wang X. Intelligent freeform manufacturing of complex organs. Artif Organs, 2012, 36(11):951-961.
|
14. |
Kutikov AB, Gurijala A, Song J. Rapid prototyping amphiphilic polymer/hydroxyapatite composite scaffolds with hydrationinduced self-fixation behavior. Tissue Eng Part C Methods, 2014, Aug 20, Epub ahead of print.
|
15. |
蒲强, 马林, 车国卫, 等.单向式胸腔镜肺叶切除安全性及技术可行性研究——附1040例报告.四川大学学报(医学版), 2013, 44(1):109-113.
|
16. |
田界勇, 马冬春, 徐美清, 等.全胸腔镜肺叶切除术治疗周围型肺癌的临床分析.中国胸心血管外科临床杂志, 2012, 19(5):479-483.
|
17. |
蔡海波, 李迎新, 张士法, 等.完全电视胸腔镜肺叶切除术治疗早期肺癌的近期疗效评价.中国胸心血管外科临床杂志, 2014, 21(2):224-227.
|
18. |
李运, 杨帆, 刘彦国, 等.全胸腔镜肺叶切除术中转开胸手术指征的探讨.中国胸心血管外科临床杂志, 2010, 17(1):32-35.
|
19. |
Akiba T, Inagaki T, Nakada T. Three-dimensional printing model of anomalous bronchi before surgery. Ann Thorac Cardiovasc Surg, 2013, Epub ahead of print.
|
20. |
Akiba T, Nakada T, Inagaki T. Three-dimensional pulmonary model using rapid-prototyping in patient with lung cancer requiring segmentectomy. Ann Thorac Cardiovasc Surg, 2013, Nov 8, Epub ahead of print.
|
21. |
Olivieri L, Krieger A, Chen MY, et al. 3D heart model guides complex stent angioplasty of pulmonary venous baffle obstruction in a Mustard repair of D-TGA. Int J Cardiol, 2014, 172(2):e297-e298.
|
22. |
Costello JP, Olivieri LJ, Krieger A, et al. Utilizing three-dimensional printing technology to assess the feasibility of high-fidelity synthetic ventricular septal defect models for simulation in medical education. World J Pediatr Congenit Heart Surg, 2014, 5(3):421-426.
|
23. |
Valverde I, Gomez G, Gonzalez A, et al. Three-dimensional patientspecific cardiac model for surgical planning in Nikaidoh procedure. Cardiol Young, 2014, 9:1-7.
|
24. |
Chapron J, Hosny H, Torii R, et al. Lessons from patient-specific 3D models of the cardiac chambers after the Mustard operation. Glob Cardiol Sci Pract, 2013, 2013(4):409-415.
|
25. |
Jacobs S, Grunert R, Mohr FW, et al. 3D-Imaging of cardiac structures using 3D heart models for planning in heart surgery:a preliminary study. Interact Cardiovasc Thorac Surg, 2008, 7(1):6-9.
|
26. |
杨延坤, 郑宏, 徐争鸣, 等. 3D打印技术辅助下经导管封堵主动脉窦瘤破裂一例.中国介入心脏病学杂志, 2014, 22(2):135-136.
|
27. |
Dankowski R, Baszko A, Sutherland M, et al. 3D heart model printing for preparation of percutaneous structural interventions:description of the technology and case report. Kardiol Pol. 2014, 72(6):546-551.
|
28. |
Jin C, Zhang J, Li X, et al. Injectable 3-D fabrication of medical electronics at the target biological tissues. Sci Rep, 2013, 3:3442.
|
29. |
Xu L, Gutbrod SR, Bonifas AP, et al. 3D multifunctional integumentary membranes for spatiotemporal cardiac measurements and stimulation across the entire epicardium. Nat Commun, 2014, 5:3329.
|
30. |
Carden KA, Boiselle PM, Waltz DA, et al. Tracheomalacia and tracheobronchomalacia in children and adults:an in-depth review. Chest, 2005, 127(3):984-1005.
|
31. |
Masters IB, Chang AB. Interventions for primary (intrinsic) tracheomalacia in children. Cochrane Database Syst Rev, 2005, 19(4):CD005304.
|
32. |
Zopf DA, Flanagan CL, Wheeler M, et al. Treatment of severe porcine tracheomalacia with a 3-dimensionally printed, bioresorbable, external airway splint. JAMA Otolaryngol Head Neck Surg, 2014, 140(1):66-71.
|
33. |
Li X, Cai H, Cui X, et al. Prevention of late postpneumonectomy complications using a 3D printed lung in dog models. Eur J Cardiothorac Surg, 2014, 46(5):e67-e73.
|
34. |
Fedorovich NE, Schuurman W, Wijnberg HM, et al. Biofabrication of osteochondral tissue equivalents by printing topologically defined, cell-laden hydrogel scaffolds. Tissue Eng Part C Methods, 2011, 18(1):33-44.
|
35. |
Williams SK, Touroo JS, Church KH, et al. Encapsulation of adipose stromal vascular fraction cells in alginate hydrogel spheroids using a direct-write three-dimensional printing system. Biores Open Access, 2013, 2(6):448-454.
|
36. |
Hockaday LA, Kang KH, Colangelo NW, et al. Rapid 3D printing of anatomically accurate and mechanically heterogeneous aortic valve hydrogel scaffolds. Biofabrication, 2012, 4(3):035005.
|
37. |
Duan B, Hockaday LA, Kang KH, et al. 3D bioprinting of heterogeneous aortic valve conduits with alginate/gelatin hydrogels. J Biomed Mater Res A, 2013, 101(5):1255-1264.
|
38. |
Gaetani R, Doevendans PA, Metz C HG, et al. Cardiac tissue engineering using tissue printing technology and human cardiac progenitor cells. Biomaterials, 2012, 33(6):1782-1790.
|
39. |
Boland T, Xu T, Damon B, et al. Application of inkjet printing to tissue engineering. Biotechnol J, 2006, 1(9):910-917.
|
40. |
Lee V, Dai G. Vasculature formation using three-dimensional cell printing technologyC. ASME 2010 Summer Bioengineering Conference. American Society of Mechanical Engineers, 2010:971-972.
|
41. |
Miller JS, Stevens KR, Yang MT, et al. Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues. Nat Mater, 2012, 11(9):768-774.
|
42. |
Kolesky DB, Truby RL, Gladman A, et al. 3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs. Adv Mater, 2014, 26(19):3124-3130.
|
43. |
贺超良, 汤朝晖, 田华雨, 等. 3D打印技术制备生物医用高分子材料的研究进展.高分子学报, 2013(6):722-732.
|
44. |
Stephens B, Azimi P, El Orch Z, et al. Ultrafine particle emissions from desktop 3D printers. Atmospheric Environment, 2013, 79:334-339.
|
45. |
Hieu LC, Bohez E, Vander Sloten J, et al. Design and manufacturing of cranioplasty implants by 3-axis cnc milling. Technol Health Care, 2002, 10(5):413-423.
|