Objective To summarize the monitoring methods and preventions of the disorder of blood supplying of expanded flaps, so as to provide some references for improving the survival of expanded flaps. Methods The domestic and abroad related literature about the disorder of blood supplying of expanded flaps was reviewed and analyzed. Results Handheld Doppler, digital subtraction angiography, computer tomographic angiography, magnetic resonance angiography, and fluorescein angiography can be used as reliable preoperative imaging methods in designing expanded flaps with rich blood supply. Several techniques can be used for monitoring the blood supply of expanded flaps during the early postoperative period including traditional monitoring via physical examination, monitoring via dynamic infrared thermography, near-infrared spectroscopy tissue oximeter, external and implantable Doppler, and more recently developed diffuse correlation spectroscopy. Surgical delay, bloodletting, leech therapy, hyperbaric oxygen, and so on can decrease the risk of necrosis in expanded flaps. Conclusion The survival of expanded flap is influenced by many factors. Preoperative design by using handheld Doppler and new imaging technology and postoperative early detection of blood supply can provide references of timely intervention, so that ischemic necrosis of the flaps can be reduced, and the success rate of surgery can be improved.
ObjectiveTo summarize the progress of diagnosis and treatment of upper respiratory obstruction in patients with Treacher Collins syndrome (TCS).MethodsThe domestic and abroad literature about the diagnosis and treatment of upper respiratory obstruction in patients with TCS was extensively reviewed and analyzed.ResultsTCS is an autosomal-dominant craniofacial developmental syndrome. It is often accompanied by midface and/or mandibular hypoplasia, soft tissue hypertrophy, and other respiratory tissue developmental abnormalities, which can lead to different degrees of upper respiratory obstruction symptoms. Respiratory obstruction in patients with TCS is affected by many factors, and the obstructive degree are different. Early detection of the causes and obstructive sites and adopted targeted treatments can relieve the symptoms of respiratory obstruction and avoid severe complications.ConclusionDue to the low incidence of TCS, there is still a lack of high-quality research evidence to guide clinical treatment. Large-scale and prospective clinical studies are needed to provide new ideas for the treatment and prevention of upper respiratory obstruction.
ObjectiveTo investigate the effect of silk fibroin-poly-L-lactic acid (SF-PLLA) microcarriers on the expansion and differentiation of adipose-derived stem cells (ADSCs).MethodsADSCs were extracted from adipose tissue donated voluntarily by patients undergoing liposuction by enzymatic digestion. The 3rd generation ADSCs were inoculated on CultiSpher G and SF-PLLA microcarriers (set up as groups A and B, respectively), and cultured in the rotary cell culture system. ADSCs cultured in normal two-dimensional plane were used as the control group (group C). Scanning electron microscope was used to observe the microcarriers structure and cell growth. Live/Dead staining and confocal fluorescence microscope was used to observe the distribution and survival condition of cells on two microcarriers. DNA quantification was used to assess cell proliferation on two microcarriers. Real-time fluorescence quantitative PCR (qRT-PCR) was used to detect chondrogenesis, osteogenesis, and adipogenesis related gene expression of ADSCs in 3 groups cultured for 18 days. Flow cytometry was used to identify the MSCs surface markers of ADSCs in 3 groups cultured for 18 days, and differential experiments were made to identify differentiation ability of the harvested cells.ResultsADSCs could be adhered to and efficiently amplified on the two microcarriers. After 18 days of cultivation, the total increment of ADSCs of the two microcarriers were similar (P>0.05). qRT-PCR results showed that chondrogenesis related genes (aggrecan, cartilage oligomeric matrix protein, SOX9) were significantly up-regulated for ADSCs on SF-PLLA microcarriers and adipogenesis related genes (peroxisome proliferator-activated receptor γ, lipoprotein lipase, ADIPOQ) were significantly up-regulated for ADSCs on CultiSpher G microcarriers, all showing significant differences (P<0.05). Flow cytometry and differentiation identification proved that the harvested cells of the two groups were still ADSCs.ConclusionThe ADSCs can be amplified by SF-PLLA microcarriers, and the chondrogenic differential ability of harvested cells was up-regulated while the adipogenic differential was down-regulated.
ObjectiveTo explore the feasibility of three-dimensional (3D) bioprinted adipose-derived stem cells (ADSCs) combined with gelatin methacryloyl (GelMA) to construct tissue engineered cartilage.MethodsAdipose tissue voluntarily donated by liposuction patients was collected to isolate and culture human ADSCs (hADSCs). The third generation cells were mixed with GelMA hydrogel and photoinitiator to make biological ink. The hADSCs-GelMA composite scaffold was prepared by 3D bioprinting technology, and it was observed in general, and observed by scanning electron microscope after cultured for 1 day and chondrogenic induction culture for 14 days. After cultured for 1, 4, and 7 days, the composite scaffolds were taken for live/dead cell staining to observe cell survival rate; and cell counting kit 8 (CCK-8) method was used to detect cell proliferation. The composite scaffold samples cultured in cartilage induction for 14 days were taken as the experimental group, and the composite scaffolds cultured in complete medium for 14 days were used as the control group. Real-time fluorescent quantitative PCR (qRT-PCR) was performed to detect cartilage formation. The relative expression levels of the mRNA of cartilage matrix gene [(aggrecan, ACAN)], chondrogenic regulatory factor (SOX9), cartilage-specific gene [collagen type Ⅱ A1 (COLⅡA1)], and cartilage hypertrophy marker gene [collagen type ⅩA1 (COLⅩA1)] were detected. The 3D bioprinted hADSCs-GelMA composite scaffold (experimental group) and the blank GelMA hydrogel scaffold without cells (control group) cultured for 14 days of chondrogenesis were implanted into the subcutaneous pockets of the back of nude mice respectively, and the materials were taken after 4 weeks, and gross observation, Safranin O staining, Alcian blue staining, and collagen type Ⅱ immunohistochemical staining were performed to observe the cartilage formation in the composite scaffold.ResultsMacroscope and scanning electron microscope observations showed that the hADSCs-GelMA composite scaffolds had a stable and regular structure. The cell viability could be maintained at 80%-90% at 1, 4, and 7 days after printing, and the differences between different time points were significant (P<0.05). The results of CCK-8 experiment showed that the cells in the scaffold showed continuous proliferation after printing. After 14 days of chondrogenic induction and culture on the composite scaffold, the expressions of ACAN, SOX9, and COLⅡA1 were significantly up-regulated (P<0.05), the expression of COLⅩA1 was significantly down-regulated (P<0.05). The scaffold was taken out at 4 weeks after implantation. The structure of the scaffold was complete and clear. Histological and immunohistochemical results showed that cartilage matrix and collagen type Ⅱ were deposited, and there was cartilage lacuna formation, which confirmed the formation of cartilage tissue.ConclusionThe 3D bioprinted hADSCs-GelMA composite scaffold has a stable 3D structure and high cell viability, and can be induced differentiation into cartilage tissue, which can be used to construct tissue engineered cartilage in vivo and in vitro.
ObjectiveTo three-dimensionally calculate the craniofacial parameters of midface of patients with Treacher Collins syndrome (TCS) in China, in order to understand the changes in the spatial position relationship between the various anatomical structures of the midface.MethodsCT imaging data of TCS patients and age- and gender-matched normal populations between January 2013 and July 2020 was retrospectively analyzed. A total of 33 cases met the selection criteria for inclusion in the study, including 14 cases in the TCS group and 19 cases in the control group. ProPlan CMF 3.0 software was used to perform three-dimensional digital reconstruction of the craniofacial bone, measure the anatomical parameters of the midface, and analyze its morphological structure; at the same time perform three-dimensional digital reconstruction of the upper airway for morphological analysis (measure upper airway volume).ResultsCT images analysis revealed that all 14 patients with TCS presented the typical features with downward slanting of the palpebral fissures and different degrees of zygomatico-orbital complex dysplasia. Cephalometric and morphological analysis of the midface revealed that, multiple transverse diameters of the midface of TCS patients were significantly decreased when compared with the control group (P<0.05), such as the width of the maxillary base, the length of the maxillary complex, and some distances related to the nasal morphology; but the distance between bilateral orbitales increased in TCS group (P<0.05). Several anteroposterior distances in TCS group were decreased significantly when compared to control group and the distance between the skull base point and the posterior nasal spine was the most shortened (P<0.05). But there was no significant difference of the distance between nasion and anterior nasal spine, which represented anterior midface height, between groups (P>0.05). The skull base angle and SNB angle (the angle between the sella point-nose root point-inferior alveolar seat point) of the TCS group both decreased when compared with the control group (P<0.05), but there was no significant difference in SNA angle (the angle between the sella point-nose root point-upper alveolar seat point) between the two groups (P>0.05). The total volume of the upper airway was (24 621.07±8 476.63) mm3 in the TCS group, which was significantly lower than that of the control group [(32 864.21±13 148.74) mm3] (t=2.185, P=0.037).ConclusionThe transverse distances, anteroposterior distances, and multiple craniofacial angles measurement of TCS patients were significantly decreased when compared to the control group, presented with different degrees of zygomatico-orbital complex dysplasia, nasal and maxillary dysplasia, but there was no obvious restriction in face height development. Reduced internal diameters of the upper airway maybe responsible for the decreased upper airway volume of patients with TCS.