Cryogels are a type of hydrogel material which are fabricated by cryopolymerization at subzero temperature. Due to their unique macroporous structure, shape memory properties and injectability, cryogels have gained significant interest in the fields of tissue engineering for encouraging the repair and regeneration of injured tissues. In this review, the basic concepts relevant to cryogels are introduced, and then the fabrication principle, the process parameters and the unique properties of cryogel are discussed. Next, the latest advances of cryogels as three-dimensional scaffold for various tissue engineering applications are given. Finally, this review summarizes the current limitations of cryogels, and strategies to further improve their properties for tissue engineering. The purpose of this article is to provide a reference guide for the researchers in related fields.
Objective To develop three-dimensional (3D) porous nanofiber scaffold of PLGA-silk fibroincollagen and to investigate its cytocompatibil ity in vitro. Methods Method of electrostatic spinning was used to prepare 3D porous nanofiber scaffold of PLGA-silk fibroin-collagen (the experimental group) and 3D porous nanofiber scaffold of PLGA (the control group). The scaffold in each group was observed by scanning electron microscope (SEM). The parameters of scaffold fiber diameter, porosity, water absorption rate, and tensile strength were detected. SC harvested from the bilateral brachial plexus and sciatic nerve of 8 SD suckl ing rats of inbred strains were cultured. SC purity was detected by S-100 immunohistochemistry staining. The SCs at passage 4 (5 × 104 cells/mL) were treated with the scaffold extract of each group at a concentration of 25%, 50%, and 100%, respectively; the cells treated with DMEM served as blank control group. MTT method was used to detect absorbance (A) value 1, 3, 5, and 7 days after culture. The SC at passage 4 were seeded on the scaffold of the experimental and the control group, respectively. SEM observation was conducted 2, 4, and 6 days after co-culture, and laser scanning confocal microscope (LSCM) observation was performed 4 days after co-culture for the growth condition of SC on the scaffold. Results SEM observation: the scaffold in two groups had interconnected porous network structure; the fiber diameter in the experimental and the control group was (141 ± 9) nm and (205 ± 11) nm, respectively; the pores in the scaffold were interconnected; the porosity was 87.4% ± 1.1% and 85.3% ± 1.3%, respectively; the water absorption rate was 2 647% ± 172% and 2 593% ± 161%, respectively; the tensile strength was (0.32 ± 0.03) MPa and (0.28 ± 0.04) MPa, respectively. S-100 immunohistochemistry staining showed that the SC purity was 96.5% ± 1.3%. MTT detection: SC grew well in the different concentration groups and the control group, the absorbance (A) value increased over time, significant differences were noted among different time points in the same group (P lt; 0.05), and there was no significant difference between the different concentration groups and the blank control group at different time points (P gt; 0.05). SEM observation: in the experimental group, SC grew well on the scaffold, axon connection occurred 4 days after co-culture, the cells prol iferated massively and secreted matrix 6 days after co-culture, and the growth condition of the cells was better than the control group. The condition observed by LSCM 4 days after co-culture was the same as that of SEM. Conclusion The 3D porous nanofiber scaffoldof PLGA-silk fibroin-collagen prepared by the method of electrostatic spinning is safe, free of toxicity, and suitable for SC growth, and has good cytocompatibil ity and proper aperture and porosity. It is a potential scaffold carrier for tissue engineered nerve.
Microneedles have emerged as the new class of local drug delivery system that has broad potential for development. Considering that the microneedles can penetrate tissue barriers quickly, and provide localized and targeted drug delivery, their applications have gradually expanded to non-transdermal drug delivery recently, which are capable of providing rapid and effective treatment for injuries and diseases of organs or tissues. However, a literature search revealed that there is a lack of summaries of the latest developments in non-transdermal drug delivery research by using biomedical polymeric microneedles. The review first described the materials and fabrication methods for the polymeric microneedles, and then reviewed a representative application of microneedles for non-transdermal drug delivery, with the primary focus being on treating and repairing the tissues or organs such as oral cavity, ocular tissues, blood vessels and heart. At the end of the article, the opportunities and challenges associated with microneedles for non-transdermal drug delivery were discussed, along with its future development, in order to provide reference for researchers in the relevant field.