ObjectiveTo compare the clinical efficacy of abdominal preperitoneal laparoscopic hernia repair with 3DMax patch and plain film for treatment of inguinal hernia. MethodsThe clinical and follow-up survey data of 120 patients with inguinal hernia in The Second Affiliated Hospital of Harbin Medical University, between January 2009 and May 2014, which were treated by laparoscopic transabdominal preperitoneal repair (TAPP) were retrospectively analyzed. One hundred and twenty cases were divided into two groups:plain film group (45 cases) and 3DMax group (75 cases) according to the intraoperative use of different patchs. The patches of 3DMax group were not fixed, the patches of plain film group were fixed with metal nails. The postoperative clinical effect of two groups were analyzed. ResultsThe operative time, intraoperative blood loss, and postoperative hospitalization days of two groups were no statistical significance (P > 0.05). The postoperative off bed activity time of patients in 3DMax group and plain film group was (20.2±8.1) h and (26.3±9.2) h, respectively, the average off bed activity time in 3DMax group was significantly earlier than that in plain film group (P=0.041). The material expenses and hospitalization expenses of the 3DMax group were significantly lower than those of the plain film group (P=0.001, P=0.038). The incidence of foreign body sensation of inguinal region in 1, 3, and 9 months after operation of 3DMax group were lower than those of plain film group (P=0.045). The VAS score in 1 and 3 months after operation of 3DMax group were lower than those of plain film group (P < 0.05), but there was no statistically significant in 6 months after operation of 2 groups (P > 0.05). There was no recurrence case in two groups. ConclusionsThe use of 3DMax patch in laparoscopic TAPP operation have more simple operation, hospitalization expenses decreased, recovery faster, postoperative inguinal nerve pain and foreign body sensation more lighter, and complications more less. It is worthy of clinical popularization and Application.
There has been ongoing progress in the new technique and equipment in vitreoretinal surgery in recent years, contributing to the improvement of treatment of various vitreoretinal diseases. The application of 3D heads-up display viewing system (3D viewing system) has been one of the most fascinating breakthroughs in vitreoretinal surgery. Unlike the traditional method in which the surgeons have to look through the microscope eyepieces, this system allows them to turn their heads up and operate with their eyes on a high-definition 3D monitor. It provides the surgeons with superior visualization and stereoscopic sensation. And increasing studies have revealed it to be as safe and effective as the traditional microscopic system. Furthermore, the surgeons can keep a heads-up position in a more comfortable posture and lesson the pressure on cervical spine. Meanwhile, 3D viewing system makes it easier for the teaching and learning process among surgeons and assistants. However, there are still potential disadvantages including the latency between surgeon maneuver and visualization on the display, learning curves and cost. We hope that the 3D viewing system will be widely used and become a useful new tool for various vitreoretinal diseases in the near future with rapid development in the technology and constant upgrade of the system.
ObjectiveTo explore the safety and feasibility of 3D precise localization based on anatomical markers in the treatment of pulmonary nodules during video-assisted thoracoscopic surgery (VATS).MethodsFrom June 2019 to April 2015, 27 patients with pulmonary nodules underwent VATS in our Hospital were collected in the study, including 3 males and 24 females aged 51.8±13.7 years. The surgical data were retrospectively reviewed and analyzed, such as localization time, localization accuracy rate, pathological results, complication rate and postoperative hospital stay.ResultsA total of 28 pulmonary nodules were localized via this method. All patients received surgery successfully. No mortality or major morbidity occurred. The general mean localization time was 17.6±5.8 min, with an accuracy of 96.4%. The mean diameter of pulmonary nodules was 14.0±8.0 mm with a mean distance from visceral pleura of 6.5±5.4 mm. There was no localization related complication. The mean postoperative hospital stay was 6.7±4.3 d. The routine pathological result showed that 78.6% of the pulmonary nodules were adenocarcinoma.Conclusion3D precise localization based on anatomical markers in the treatment of pulmonary nodules during thoracoscopic surgery is accurate, safe, effective, economical and practical, and it is easy to master with a short learning curve.
Objective To explore the application effect of 3D printed heart models in the training of young cardiac surgeons, and evaluate their application value in surgical simulation and skill improvement. MethodsEight young cardiac surgeons were selected form West China Hospital as the trainees. Before training, the Hands-On Surgical Training-Congenital Heart Surgery (HOST-CHS) operation scores of the 8 cardiac surgeons were obtained after operating on 2 pig heart models of ventricular septal defect (VSD). Subsequently, simulation training was conducted on a 3D printed peri-membrane VSD heart model for 6 weeks, once a week. After the training, all trainees completed 2 pig heart VSD repair surgeries. The improvement of doctors’ skills was evaluated through survey questionnaires, HOST-CHS scores, and operation time after training. ResultsBefore the training, the average HOST-CHS score of the 8 trainees was 52.2±6.3 points, and the average time for VSD repair was 54.7±7.1 min. During the 6-week simulation training using 3D printed models, the total score of HOST-CHS for the 8 trainees gradually increased (P<0.001), and the time required to complete VSD repair was shortened (P<0.001). The trainees had the most significant improvement in scores of surgical cognition and protective awareness. The survey results showed that trainees were generally very satisfied with the effectiveness of 3D model simulation training. Conclusion The 3D printed VSD model demonstrates significant application advantages in the training of young cardiac surgeons. By providing highly realistic anatomical structures, 3D models can effectively enhance surgeons’ surgical skills. It is suggested to further promote the application of 3D printing technology in medical education, providing strong support for cultivating high-quality cardiac surgeons.
As one of the most breakthrough cutting-edge technologies in the biomedical field in recent years, organoid culture technology can use cells derived from, either (pluripotent) stem cells or tissue-derived differentiated/progenitor cells (foetal, neonatal, or adult) to form 3D multicellular structure organoids with self-organizing and recapitulating at least some features of the organ including tissue architecture or function abilities. Recently, organoids have been widely used in disease model construction, anti-cancer drug screening, gene or cell therapy, etc., providing an ideal model for basic biomedical research, drug development and clinical precision medicine, and has shown an important role in regenerative medicine.
ObjectiveTo evaluate the clinical value of three-dimensional (3D) printing model in accurate and minimally invasive treatment of double outlet right ventricle (DORV).MethodsFrom August 2018 to August 2019, 35 patients (22 males and 13 females) with DORV aged from 5 months to 17 years were included in the study. Their mean weight was 21.35±8.48 kg. Ten patients who received operations guided by 3D printing model were allocated to a 3D printing model group, and the other 25 patients who received operations without guidance by 3D printing model were allocated to a non-3D printing model group. Preoperative transthoracic echocardiography and CT angiography were performed to observe the location and diameter of ventricular septal defect (VSD), and to confirm the relationship between VSD and double arteries.ResultsThe McGoon index of patients in the 3D printing model group was 1.91±0.70. There was no statistical difference in the size of VSD (13.20±4.57 mm vs. 13.40±5.04 mm, t=−0.612, P=0.555), diameter of the ascending aorta (17.10±2.92 mm vs. 16.90±3.51 mm, t=0.514, P=0.619) or diameter of pulmonary trunk (12.50±5.23 mm vs. 12.90±4.63 mm, t=−1.246, P=0.244) between CT and 3D printing model measurements. The Pearson correlation coefficients were 0.982, 0.943 and 0.975, respectively. The operation time, endotracheal intubation time, ICU stay time and hospital stay time in the 3D printing model group were all shorter than those in the non-3D printing model group (P<0.05).ConclusionThe relationship between VSD and aorta and pulmonary artery can be observed from a 3D perspective by 3D printing technology, which can guide the preoperative surgical plans, assist physicians to make reasonable and effective decisions, shorten intraoperative exploration time and operation time, and decrease the surgery-related risks.
ObjectiveTo explore the feasibility of lumbar puncture models based on 3D printing technology for training junior orthopaedic surgeons to find the optimal pedicle screw insertion points.MethodsMimics software was used to design 3D models of lumbar spine with the optimal channels and alternative channels. Then, the printed lumbar spine models, plasticine, and cloth were used to build lumbar puncture models. From January 2018 to June 2019, 43 orthopedic trainees performed simulated operations to search for the insertion points of pedicle screws base on the models. The operations were performed once a day for 10 consecutive days, and the differences in operation scores and operation durations of the trainees among the 10 days were compared.ResultsAll the trainees completed the surgical training operations successfully, and there were significant differences in the operation scores (13.05±2.45, 14.02±3.96, 17.58±3.46, 21.02±2.04, 23.40±4.08, 25.14±3.72, 27.26±6.09, 33.37±4.23, 35.00±4.15, 38.49±1.70; F=340.604, P<0.001) and operation durations [(22.51±4.28), (19.93±4.28), (18.05±2.89), (17.05±1.76), (16.98±1.97), (15.47±1.74), (13.51±1.42), (12.60±2.17), (12.44±1.71), (11.91±1.87) minutes; F=102.359, P<0.001] among the 10 days.ConclusionThe 3D models of lumbar puncture are feasible and repeatable, which can contribute to surgical training.
In this paper, we present a 3D virtual phantom design software, which was developed based on object-oriented programming methodology and dedicated to medical physics research. This software was named Magical Phantom (MPhantom), which is composed of 3D visual builder module and virtual CT scanner. The users can conveniently construct any complex 3D phantom, and then export the phantom as DICOM 3.0 CT images. MPhantom is a user-friendly and powerful software for 3D phantom configuration, and has passed the real scene's application test. MPhantom will accelerate the Monte Carlo simulation for dose calculation in radiation therapy and X ray imaging reconstruction algorithm research.
Shear thinning is an ideal feature of bioink because it can reduce the chance of blocking. For extrusion based biological printing, bioink will experience shear force when passing through the biological printer. The shear rate will increase with the increase of extrusion rate, and the apparent viscosity of shear-thinning bioink will decrease, which makes it easier to block, thus achieving the structural fidelity of 3D printing tissue. The manufacturing of complex functional structures in tissue trachea requires the precise placement and coagulation of bioink layer by layer, and the shear-thinning bioink may well meet this requirement. This review focuses on the importance of mechanical properties, classification and preparation methods of shear-thinning bioink, and lists its current application status in 3D printing tissue trachea to discuss the more possibilities and prospects of this biological material in tissue trachea.
Mitral valve disease is the most common cardiac valve disease. The main treatment of mitral valve disease is surgery or interventional therapy. However, as the anatomy of mitral valve is complicated, the operation is particularly difficult. As a result, it requires sophisticated experiences for surgeons. Three-dimensional (3D) printing technology can transform two-dimensional medical images into 3D solid models. So it can provide clear spatial anatomical information and offer safe and personalized treatment for the patients by simulating surgery process. This article reviews the applications of 3D printing technology in the treatment of mitral valve disease.